操作系统及Oracle版本

Linux版本:rhel-server-5.8-x86_64-dvd

Oracle版本:Oracle Database 11g Release 2 (11.2.0.4.0) for Linux x86-64 (p13390677_112040_Linux-x86-64_1of7.zip、p13390677_112040_Linux-x86-64_2of7.zip)

硬件检测:

物理内存不少于1G

硬盘可以空间不少于5G

swap分区空间不少于2G

支持256色以上显卡

cpu主频不小于550mHZ

cat /etc/issue

uname -r

grep MemTotal /proc/meminfo

grep SwapTotal /proc/meminfo

grep "model name" /proc/cpuinfo

free

df -k /tmp

df -k

User Accounts

1. Create OS groups using the command below. Enter these commands as the 'root' user:

#/usr/sbin/groupadd -g 501 oinstall

#/usr/sbin/groupadd -g 502 dba

2. Create the users that will own the Oracle software using the commands:

#/usr/sbin/useradd -u 502 -g oinstall -G dba  oracle

3. Set the password for the oracle account using the following command. Replace password with your own

password.

passwd oracle

Configuring Kernel Parameters

vi /etc/sysctl.conf

kernel.shmmni = 4096

kernel.sem = 250 32000 100 128

fs.file-max = 6553600

net.ipv4.ip_local_port_range = 9000 65500

net.core.rmem_default = 262144

net.core.rmem_max = 4194304

net.core.wmem_default = 262144

net.core.wmem_max = 1048576

fs.aio-max-nr = 1048576

 

#/sbin/sysctl –p

 

Set shell limits for the oracle user

1. Add the following lines to the /etc/security/limits.conf file:

vi /etc/security/limits.conf

oracle soft nproc 2047

oracle hard nproc 16384

oracle soft nofile 1024

oracle hard nofile 65536

2. Add or edit the following line in the /etc/pam.d/login file, if it does not already exist:

session required pam_limits.so

3. Make the following changes to the default shell startup file, add the following lines to the /etc/profile file:

if [ $USER = "oracle" ]; then

        if [ $SHELL = "/bin/ksh" ]; then

              ulimit -p 16384

              ulimit -n 65536

        else

              ulimit -u 16384 -n 65536

        fi

fi

Create the Oracle Inventory Directory

# mkdir -p /u01/app/oraInventory

# chown -R grid:oinstall /u01/app/oraInventory

# chmod -R 775 /u01/app/oraInventory

 

Creating the Oracle Grid Infrastructure Home Directory

# mkdir -p / oracle

# mkdir / oracle/cfgtoollogs --needed to ensure that dbca is able to run after the rdbms installation.

# chown -R oracle:oinstall /oracle

# chmod -R 775 /oracle

Check OS Software Requirements

binutils-2.15.92.0.2

compat-libstdc++-33-3.2.3

compat-libstdc++-33-3.2.3 (32 bit)

elfutils-libelf-0.97

elfutils-libelf-devel-0.97

expat-1.95.7

gcc-3.4.6

gcc-c++-3.4.6

glibc-2.3.4-2.41

glibc-2.3.4-2.41 (32 bit)

glibc-common-2.3.4

glibc-devel-2.3.4

glibc-headers-2.3.4

libaio-0.3.105

libaio-0.3.105 (32 bit)

libaio-devel-0.3.105

libaio-devel-0.3.105 (32 bit)

libgcc-3.4.6

libgcc-3.4.6 (32-bit)

libstdc++-3.4.6

libstdc++-3.4.6 (32 bit)

libstdc++-devel 3.4.6

make-3.80

pdksh-5.2.14

sysstat-5.0.5

unixODBC-2.2.11

unixODBC-2.2.11 (32 bit)

unixODBC-devel-2.2.11

unixODBC-devel-2.2.11 (32 bit)

 

The following command can be run on the system to list the currently installed packages:

rpm -q --qf '%{NAME}-%{VERSION}-%{RELEASE} (%{ARCH})\n' binutils \

compat-libstdc++-33 \

elfutils-libelf \

elfutils-libelf-devel \

gcc \

gcc-c++ \

glibc \

glibc-common \

glibc-devel \

glibc-headers \

ksh \

libaio \

libaio-devel \

libgcc \

libstdc++ \

libstdc++-devel \

make \

sysstat \

unixODBC \

unixODBC-devel

 

 

如果提示没有安装,那就把没有的包打上去

 

 

 

配置环境变量:

vi .bash_profile

export PATH

export ORACLE_BASE=/ oracle

export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1

export ORACLE_SID=orcl

export PATH=$ORACLE_HOME/bin:$HOME/bin:$PATH

复制响应文件模板

mkdir etc

cp /home/oracle/database/response/* /home/oracle/etc/

设置响应文件权限

su - root

chmod 700 /home/oracle/etc/*.rsp

[oracle@frank ~]$ more /home/oracle/etc/db_install.rsp

####################################################################

## Copyright(c) Oracle Corporation 1998, 2013. All rights reserved.##

##                                                                ##

## Specify values for the variables listed below to customize     ##

## your installation.                                             ##

##                                                                ##

## Each variable is associated with a comment. The comment        ##

## can help to populate the variables with the appropriate        ##

## values.                                                        ##

##                                                                ##

## IMPORTANT NOTE: This file contains plain text passwords and    ##

## should be secured to have read permission only by oracle user  ##

## or db administrator who owns this installation.                ##

##                                                                ##

####################################################################

#-------------------------------------------------------------------------------

# Do not change the following system generated value.

#-------------------------------------------------------------------------------

oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0

#-------------------------------------------------------------------------------

# Specify the installation option.

# It can be one of the following:

#   - INSTALL_DB_SWONLY

#   - INSTALL_DB_AND_CONFIG

#   - UPGRADE_DB

#-------------------------------------------------------------------------------

oracle.install.option=INSTALL_DB_SWONLY

#-------------------------------------------------------------------------------

# Specify the hostname of the system as set during the install. It can be used

# to force the installation to use an alternative hostname rather than using the

# first hostname found on the system. (e.g., for systems with multiple hostnames

# and network interfaces)

#-------------------------------------------------------------------------------

ORACLE_HOSTNAME=frank

#-------------------------------------------------------------------------------

# Specify the Unix group to be set for the inventory directory.

#-------------------------------------------------------------------------------

UNIX_GROUP_NAME=oinstall

#-------------------------------------------------------------------------------

# Specify the location which holds the inventory files.

# This is an optional parameter if installing on

# Windows based Operating System.

#-------------------------------------------------------------------------------

INVENTORY_LOCATION=/oracle/oraInventory

#-------------------------------------------------------------------------------

# Specify the languages in which the components will be installed.

#

# en   : English                  ja   : Japanese

# fr   : French                   ko   : Korean

# ar   : Arabic                   es   : Latin American Spanish

# bn   : Bengali                  lv   : Latvian

# pt_BR: Brazilian Portuguese     lt   : Lithuanian

# bg   : Bulgarian                ms   : Malay

# fr_CA: Canadian French          es_MX: Mexican Spanish

# ca   : Catalan                  no   : Norwegian

# hr   : Croatian                 pl   : Polish

# cs   : Czech                    pt   : Portuguese

# da   : Danish                   ro   : Romanian

# nl   : Dutch                    ru   : Russian

# ar_EG: Egyptian                 zh_CN: Simplified Chinese

# en_GB: English (Great Britain)  sk   : Slovak

# et   : Estonian                 sl   : Slovenian

# fi   : Finnish                  es_ES: Spanish

# de   : German                   sv   : Swedish

# el   : Greek                    th   : Thai

# iw   : Hebrew                   zh_TW: Traditional Chinese

# hu   : Hungarian                tr   : Turkish

# is   : Icelandic                uk   : Ukrainian

# in   : Indonesian               vi   : Vietnamese

# it   : Italian

#

# all_langs   : All languages

#

# Specify value as the following to select any of the languages.

# Example : SELECTED_LANGUAGES=en,fr,ja

#

# Specify value as the following to select all the languages.

# Example : SELECTED_LANGUAGES=all_langs

#-------------------------------------------------------------------------------

SELECTED_LANGUAGES=en

#-------------------------------------------------------------------------------

# Specify the complete path of the Oracle Home.

#-------------------------------------------------------------------------------

ORACLE_HOME=/oracle/product/11.2.0/db_1

#-------------------------------------------------------------------------------

# Specify the complete path of the Oracle Base.

#-------------------------------------------------------------------------------

ORACLE_BASE=/oracle

#-------------------------------------------------------------------------------

# Specify the installation edition of the component.

#

# The value should contain only one of these choices.

#   - EE     : Enterprise Edition

#   - SE     : Standard Edition

#   - SEONE  : Standard Edition One

#   - PE     : Personal Edition (WINDOWS ONLY)

#-------------------------------------------------------------------------------

oracle.install.db.InstallEdition=EE

#-------------------------------------------------------------------------------

# This variable is used to enable or disable custom install and is considered

# only if InstallEdition is EE.

#

#   - true  : Components mentioned as part of 'optionalComponents' property

#             are considered for install.

#   - false : Value for 'optionalComponents' is not considered.

#-------------------------------------------------------------------------------

oracle.install.db.EEOptionsSelection=false

#-------------------------------------------------------------------------------

# This property is considered only if 'EEOptionsSelection' is set to true

#

# Description: List of Enterprise Edition Options you would like to enable.

#

#              The following choices are available. You may specify any

#              combination of these choices.  The components you choose should

#              be specified in the form "internal-component-name:version"

#              Below is a list of components you may specify to enable.

#

#              oracle.oraolap:11.2.0.4.0 - Oracle OLAP

#              oracle.rdbms.dm:11.2.0.4.0 - Oracle Data Mining RDBMS Files

#              oracle.rdbms.dv:11.2.0.4.0- Oracle Database Vault option

#              oracle.rdbms.lbac:11.2.0.4.0 - Oracle Label Security

#              oracle.rdbms.partitioning:11.2.0.4.0 - Oracle Partitioning

#              oracle.rdbms.rat:11.2.0.4.0 - Oracle Real Application Testing

#-------------------------------------------------------------------------------

oracle.install.db.optionalComponents=

###############################################################################

#                                                                             #

# PRIVILEGED OPERATING SYSTEM GROUPS                                          #

# ------------------------------------------                                  #

# Provide values for the OS groups to which OSDBA and OSOPER privileges       #

# needs to be granted. If the install is being performed as a member of the   #

# group "dba", then that will be used unless specified otherwise below.       #

#                                                                             #

# The value to be specified for OSDBA and OSOPER group is only for UNIX based #

# Operating System.                                                           #

#                                                                             #

###############################################################################

#------------------------------------------------------------------------------

# The DBA_GROUP is the OS group which is to be granted OSDBA privileges.

#-------------------------------------------------------------------------------

oracle.install.db.DBA_GROUP=dba

#------------------------------------------------------------------------------

# The OPER_GROUP is the OS group which is to be granted OSOPER privileges.

# The value to be specified for OSOPER group is optional.

#------------------------------------------------------------------------------

oracle.install.db.OPER_GROUP=

#-------------------------------------------------------------------------------

# Specify the cluster node names selected during the installation.

# Example : oracle.install.db.CLUSTER_NODES=node1,node2

#-------------------------------------------------------------------------------

oracle.install.db.CLUSTER_NODES=

#------------------------------------------------------------------------------

# This variable is used to enable or disable RAC One Node install.

#

#   - true  : Value of RAC One Node service name is used.

#   - false : Value of RAC One Node service name is not used.

#

# If left blank, it will be assumed to be false.

#------------------------------------------------------------------------------

oracle.install.db.isRACOneInstall=false

#------------------------------------------------------------------------------

# Specify the name for RAC One Node Service.

#------------------------------------------------------------------------------

oracle.install.db.racOneServiceName=

#-------------------------------------------------------------------------------

# Specify the type of database to create.

# It can be one of the following:

#   - GENERAL_PURPOSE/TRANSACTION_PROCESSING

#   - DATA_WAREHOUSE

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.type=GENERAL_PURPOSE

#-------------------------------------------------------------------------------

# Specify the Starter Database Global Database Name.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.globalDBName=

#-------------------------------------------------------------------------------

# Specify the Starter Database SID.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.SID=

#-------------------------------------------------------------------------------

# Specify the Starter Database character set.

#

#  One of the following

#  AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2,

#  EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257,

#  BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6,

#  AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8,

#  IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE,

#  KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950,

#  ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.characterSet=

#------------------------------------------------------------------------------

# This variable should be set to true if Automatic Memory Management

# in Database is desired.

# If Automatic Memory Management is not desired, and memory allocation

# is to be done manually, then set it to false.

#------------------------------------------------------------------------------

oracle.install.db.config.starterdb.memoryOption=false

#-------------------------------------------------------------------------------

# Specify the total memory allocation for the database. Value(in MB) should be

# at least 256 MB, and should not exceed the total physical memory available

# on the system.

# Example: oracle.install.db.config.starterdb.memoryLimit=512

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.memoryLimit=

#-------------------------------------------------------------------------------

# This variable controls whether to load Example Schemas onto

# the starter database or not.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.installExampleSchemas=false

#-------------------------------------------------------------------------------

# This variable includes enabling audit settings, configuring password profiles

# and revoking some grants to public. These settings are provided by default.

# These settings may also be disabled.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.enableSecuritySettings=true

###############################################################################

#                                                                             #

# Passwords can be supplied for the following four schemas in the               #

# starter database:                                                                 #

#   SYS                                                                       #

#   SYSTEM                                                                    #

#   SYSMAN (used by Enterprise Manager)                                       #

#   DBSNMP (used by Enterprise Manager)                                       #

#                                                                             #

# Same password can be used for all accounts (not recommended)                      #

# or different passwords for each account can be provided (recommended)       #

#                                                                             #

###############################################################################

#------------------------------------------------------------------------------

# This variable holds the password that is to be used for all schemas in the

# starter database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.password.ALL=

#-------------------------------------------------------------------------------

# Specify the SYS password for the starter database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.password.SYS=

#-------------------------------------------------------------------------------

# Specify the SYSTEM password for the starter database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.password.SYSTEM=

#-------------------------------------------------------------------------------

# Specify the SYSMAN password for the starter database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.password.SYSMAN=

#-------------------------------------------------------------------------------

# Specify the DBSNMP password for the starter database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.password.DBSNMP=

#-------------------------------------------------------------------------------

# Specify the management option to be selected for the starter database.

# It can be one of the following:

#   - GRID_CONTROL

#   - DB_CONTROL

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.control=DB_CONTROL

#-------------------------------------------------------------------------------

# Specify the Management Service to use if Grid Control is selected to manage

# the database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.gridcontrol.gridControlServiceURL=

###############################################################################

#                                                                             #

# SPECIFY BACKUP AND RECOVERY OPTIONS                                               #

# ------------------------------------                                            #

# Out-of-box backup and recovery options for the database can be mentioned    #

# using the entries below.                                                             #

#                                                                             #

###############################################################################

#------------------------------------------------------------------------------

# This variable is to be set to false if automated backup is not required. Else

# this can be set to true.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.automatedBackup.enable=false

#------------------------------------------------------------------------------

# Regardless of the type of storage that is chosen for backup and recovery, if

# automated backups are enabled, a job will be scheduled to run daily to backup

# the database. This job will run as the operating system user that is

# specified in this variable.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.automatedBackup.osuid=

#-------------------------------------------------------------------------------

# Regardless of the type of storage that is chosen for backup and recovery, if

# automated backups are enabled, a job will be scheduled to run daily to backup

# the database. This job will run as the operating system user specified by the

# above entry. The following entry stores the password for the above operating

# system user.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.automatedBackup.ospwd=

#-------------------------------------------------------------------------------

# Specify the type of storage to use for the database.

# It can be one of the following:

#   - FILE_SYSTEM_STORAGE

#   - ASM_STORAGE

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.storageType=

#-------------------------------------------------------------------------------

# Specify the database file location which is a directory for datafiles, control

# files, redo logs.

#

# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=

#-------------------------------------------------------------------------------

# Specify the backup and recovery location.

#

# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=

#-------------------------------------------------------------------------------

# Specify the existing ASM disk groups to be used for storage.

#

# Applicable only when oracle.install.db.config.starterdb.storageType=ASM_STORAGE

#-------------------------------------------------------------------------------

oracle.install.db.config.asm.diskGroup=

#-------------------------------------------------------------------------------

# Specify the password for ASMSNMP user of the ASM instance.

#

# Applicable only when oracle.install.db.config.starterdb.storage=ASM_STORAGE

#-------------------------------------------------------------------------------

oracle.install.db.config.asm.ASMSNMPPassword=

#------------------------------------------------------------------------------

# Specify the My Oracle Support Account Username.

#

#  Example   : MYORACLESUPPORT_USERNAME=abc@oracle.com

#------------------------------------------------------------------------------

MYORACLESUPPORT_USERNAME=

#------------------------------------------------------------------------------

# Specify the My Oracle Support Account Username password.

#

# Example    : MYORACLESUPPORT_PASSWORD=password

#------------------------------------------------------------------------------

MYORACLESUPPORT_PASSWORD=

#------------------------------------------------------------------------------

# Specify whether to enable the user to set the password for

# My Oracle Support credentials. The value can be either true or false.

# If left blank it will be assumed to be false.

#

# Example    : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true

#------------------------------------------------------------------------------

SECURITY_UPDATES_VIA_MYORACLESUPPORT=false

#------------------------------------------------------------------------------

# Specify whether user doesn't want to configure Security Updates.

# The value for this variable should be true if you don't want to configure

# Security Updates, false otherwise.

#

# The value can be either true or false. If left blank it will be assumed

# to be false.

#

# Example    : DECLINE_SECURITY_UPDATES=false

#------------------------------------------------------------------------------

DECLINE_SECURITY_UPDATES=true

#------------------------------------------------------------------------------

# Specify the Proxy server name. Length should be greater than zero.

#

# Example    : PROXY_HOST=proxy.domain.com

#------------------------------------------------------------------------------

PROXY_HOST=

#------------------------------------------------------------------------------

# Specify the proxy port number. Should be Numeric and at least 2 chars.

#

# Example    : PROXY_PORT=25

#------------------------------------------------------------------------------

PROXY_PORT=

#------------------------------------------------------------------------------

# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD

# blank if your proxy server requires no authentication.

#

# Example    : PROXY_USER=username

#------------------------------------------------------------------------------

PROXY_USER=

#------------------------------------------------------------------------------

# Specify the proxy password. Leave PROXY_USER and PROXY_PWD

# blank if your proxy server requires no authentication.

#

# Example    : PROXY_PWD=password

#------------------------------------------------------------------------------

PROXY_PWD=

#------------------------------------------------------------------------------

# Specify the proxy realm.

#

# Example    : PROXY_REALM=metalink

#------------------------------------------------------------------------------

PROXY_REALM=

#------------------------------------------------------------------------------

# Specify the Oracle Support Hub URL.

#

# Example    : COLLECTOR_SUPPORTHUB_URL=https://orasupporthub.company.com:8080/

#------------------------------------------------------------------------------

COLLECTOR_SUPPORTHUB_URL=

#------------------------------------------------------------------------------

# Specify the auto-updates option. It can be one of the following:

#   - MYORACLESUPPORT_DOWNLOAD

#   - OFFLINE_UPDATES

#   - SKIP_UPDATES

#------------------------------------------------------------------------------

oracle.installer.autoupdates.option=SKIP_UPDATES

#------------------------------------------------------------------------------

# In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where

# the updates are to be downloaded.

# In case OFFLINE_UPDATES option is chosen, specify the location where the updates

# are present.

#------------------------------------------------------------------------------

oracle.installer.autoupdates.downloadUpdatesLoc=

#------------------------------------------------------------------------------

# Specify the My Oracle Support Account Username which has the patches download privileges

# to be used for software updates.

#  Example   : AUTOUPDATES_MYORACLESUPPORT_USERNAME=abc@oracle.com

#------------------------------------------------------------------------------

AUTOUPDATES_MYORACLESUPPORT_USERNAME=

#------------------------------------------------------------------------------

# Specify the My Oracle Support Account Username password which has the patches download privileges

# to be used for software updates.

#

# Example    : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password

#------------------------------------------------------------------------------

AUTOUPDATES_MYORACLESUPPORT_PASSWORD=

[oracle@frank database]$./runInstaller -silent -force –responseFile /home/oracle/etc/db_install.rsp

Starting Oracle Universal Installer...

Checking Temp space: must be greater than 120 MB.   Actual 2665 MB    Passed

Checking swap space: must be greater than 150 MB.   Actual 1945 MB    Passed

Preparing to launch Oracle Universal Installer from /tmp/OraInstall2014-04-24_05-00-15PM. Please wait ...[oracle@frank database]$

最后

You can find the log of this install session at:

/oracle/oraInventory/logs/installActions2014-04-24_08-07-26PM.log

The installation of Oracle Database 11g was successful.

Please check '/oracle/oraInventory/logs/silentInstall2014-04-24_08-07-26PM.log' for more details.

As a root user, execute the following script(s):

1. /oracle/oraInventory/orainstRoot.sh

2. /oracle/product/11.2.0/db_1/root.sh

查看安装日志文件tail -100f /oracle/oraInventory/logs/installActions2014-04-24_08-07-26PM.log

运行脚本

[root@frank ~]# /oracle/oraInventory/orainstRoot.sh

Changing permissions of /oracle/oraInventory.

Adding read,write permissions for group.

Removing read,write,execute permissions for world.

Changing groupname of /oracle/oraInventory to oinstall.

The execution of the script is complete.

[root@frank ~]# /oracle/product/11.2.0/db_1/root.sh

Check /oracle/product/11.2.0/db_1/install/root_frank_2014-04-24_20-20-10.log for the output of root script

[root@frank ~]# more /oracle/product/11.2.0/db_1/install/root_frank_2014-04-24_20-20-10.log

Performing root user operation for Oracle 11g

The following environment variables are set as:

ORACLE_OWNER= oracle

ORACLE_HOME=  /oracle/product/11.2.0/db_1

Copying dbhome to /usr/local/bin ...

Copying oraenv to /usr/local/bin ...

Copying coraenv to /usr/local/bin ...

Entries will be added to the /etc/oratab file as needed by

Database Configuration Assistant when a database is created

Finished running generic part of root script.

Now product-specific root actions will be performed.

Finished product-specific root actions.

Finished product-specific root actions.

完成安装!

oracle11.2静默安装的更多相关文章

  1. redhat7.2静默安装Oracle11.2.0.4

    redhat7.2静默安装Oracle11.2.0.4我们将oracle安装到/opt/oracle目录下,后面的环境变量则以此为基础.一.设置主机hosts映射vi /etc/hosts[plain ...

  2. RHEL5.6静默安装oracle11.2.0数据库实例脚本

    脚本:单实例静默安装echo '[GENERAL] RESPONSEFILE_VERSION = "11.2.0" //查看虚拟机的版本,不能更改 OPERATION_TYPE = ...

  3. Centos7.3使用脚本自动静默安装oracle11.2.0.4数据库

    一直想着写一个脚本实现自动化安装oracle数据库.以下内容实验过几次了,可能还存在些小问题,如果在跑以下脚本中遇到问题,自己仔细排查即可 挣扎了好久,总算还是没实现,目前只能通过依次执行多个脚本来安 ...

  4. Oracle的静默安装 升级和卸载 参考规范

    Oracle的静默安装 升级和卸载 参考规范 20180912 V1 一.Oracle的安装 Oracle产品的三种安装方式分别为: 1.图形化(Java向导)安装引导 2.使用应答文件静默安装 3. ...

  5. oracle静默安装

    RHEL6+oracle11.2 无界面化命令安装如下: 1.所需安装软件包检查: yum install binutils-2.* compat-libcap1* compat-libstdc++- ...

  6. Oracle 11g静默安装软件+手工创建数据库

    由于是二次跳转+远程操作,无法使用图形界面,不能直接图形界面安装.采用静默安装软件+手工创建数据库的方式完成需求. 静默模式安装Oracle软件,配置监听程序 手工建库 检查各组件是否符合要求 1. ...

  7. Oracle 11g静默安装简明版

    环境:RHEL 6.5 + Oracle 11.2.0.4 1. 初步处理应答文件 2. 静默安装软件 3. 静默安装监听 4. 静默dbca建库 说明: 本文默认安装软件前的步骤已经设置完毕 如果没 ...

  8. 单机静默安装GI软件并创建ASM实例和ASM磁盘组

    环境:RHEL 6.4 + Oracle 11.2.0.4 需求:单机静默安装GI软件并创建ASM实例和ASM磁盘组,为后续迁移数据库文件到ASM做准备 1. 安装配置GI软件 2. 创建ASM实例 ...

  9. Linux 平台静默安装 Oracle客户端

    需求:Linux平台,安装完整版Oracle客户端 Tips:如果只是用到sqlldr,sqlplus功能,可以参考<Linux上oracle精简版客户端快速部署>快速部署精简版:如果需要 ...

随机推荐

  1. Ubuntu18.04 安装 oh-my-zsh

    目录 Ubuntu18.04 安装 oh-my-zsh 目录 安装zsh 安装curl 安装oh-my-zsh 使用zsh替换bash 修改终端主题和配色 修改终端配置 隐藏用户和主机名 效果图 Ub ...

  2. redis_2 数据类型

    1.key Redis keys 命令 下表给出了与 Redis 键相关的基本命令: 序号 命令及描述 1 DEL key该命令用于在 key 存在时删除 key. 2 DUMP key 序列化给定 ...

  3. MarkdownPad 2 安装使用之二三事

    本系列文章由 @yhl_leo 出品,转载请注明出处. 文章链接: http://blog.csdn.net/yhl_leo/article/details/50685187 官网:http://ma ...

  4. 工具-VS CODE快捷键

    快捷键 Ctrl+P 通过文件名或者标签名导航 Ctrl+Tab  在前一个文件和当前文件间切换 F1       打开全局命令 Ctrl+Shift+O will let you navigate ...

  5. POJ 2189

    P是端点,牛在区域中啊... #include <iostream> #include <cstdio> #include <cstring> #include & ...

  6. kettle 使用excel模板导出数据

    通过excel进行高速开发报表: 建设思路: 1.首先制订相关的execl模板. 2.通过etl工具(kettle)能够高速的 将数据库中的数据按excel模板导出成新的excel就可以. 当中ket ...

  7. openssl之EVP系列之2---对称加密算法概述

    openssl之EVP系列之2---对称加密算法概述     ---依据openssl doc/crypto/EVP_EncryptInit.pod和doc/ssleay.txt cipher.doc ...

  8. PHP7添加swoole扩展

    swoole需要php版本在7.0以上. 1.进入php目录中的bin目录下,通过pecl指令进行安装. cd /usr/local/php7/bin [root@localhost bin]# pw ...

  9. POJ 1155 树形DP

    题意:电视台发送信号给很多用户,每个用户有愿意出的钱,电视台经过的路线都有一定费用,求电视台不损失的情况下最多给多少用户发送信号. 转自:http://www.cnblogs.com/andre050 ...

  10. POJ 2665 模拟,,

    It is confirmed that these sections do not overlap with each other. 一句话 就变成水题了,,, // by SiriusRen #i ...