这个bug,一般是设备4948 Crash的情况:
标志1:Error Message C4K_SUPERVISOR-2-SOFTERROR: memory inconsistency detected

标志2:Tatooine CRC Error

Bug细节:

Forerunner CRC error on 54SG/53SG3 triggers watchdog timeout crash
CSCtk75675
 
Description
Symptom:
Switch can crash with an Watchdog NMI Vector 000 and CRC error.

Conditions:

1) Applies to Sup6-E, 4900M, Sup6L-E, 4948-E
2) IOS 12.2(50)SG OR 12.2(53)SG3 OR 12.2(54)SG only
3) "%C4K_SUPERVISOR-2-FPGASOFTERROR: Memory inconsistency detected" have
appeared on the switch followed by link flaps and pluggable insertion/removal on uplinks
4) On 4900M affected ports are baseboard ports
5) On 4948-E affected ports are all ports

Workaround:
1) Reload the switch as soon as "%C4K_SUPERVISOR-2-FPGASOFTERROR: Memory
inconsistency detected" messages appear.

2) Upgrade to 12.2(54)SG1 OR 12.2(53)SG4 (and higher) OR 15.0(02)SG (and
higher)

Further Problem Description:
"%C4K_SUPERVISOR-2-FPGASOFTERROR: Memory inconsistency detected" is due to a
legitimate parity error occurring on a device on the supervisor. The switch
should be reloaded at the next available maintenance window.

 

Bug搬运工-Forerunner CRC error on 54SG/53SG3 triggers watchdog timeout crash的更多相关文章

  1. libpng error: IHDR: CRC error

    原本正常显示在主页端logo图片无法显示了,爆出如下错误: libpng error: IHDR: CRC error 查找原因如下:

  2. [转]iMPACT Spartan-6 FPGA - "WARNING:iMPACT:2217-Error shows in the status register, CRC Error bit is Not 0"

    AR# 45304 iMPACT Spartan-6 FPGA - "WARNING:iMPACT:2217-Error shows in the status register, CRC ...

  3. 记一次安装kolla遇到DockerException: Error while fetching server API version: Timeout value connect was Timeout的问题

    1)环境信息: docker版本:17.09,当docker的版本是12.06时,也会报这个错误 [root@localhost ~]# docker --version Docker version ...

  4. Bug搬运工-CSCux99539:Intermittent error message "Power supply 2 failed or shutdown"

    Description Symptom:Following error messages will be seen intermittently.%PFMA-2-PS_FAIL: Power supp ...

  5. IOS bug之Code Sign error:Provisioning profile

    刚才解决一个版本冲突的bug,记在了博客里,这让我想起了另外一个bug,当时犹豫公司的开发者账号过期了,我打开应用运行时提示Code Sign error:Provisioning profile   ...

  6. Modbus Poll :Byte Missing Error或CRC Error

    原因: 1.通信线路受干扰或是路线接触不良:    用显示器测量物理电平信号   2.从机工作不正常: 检测电源不正常或查程序bug   3.PC主机串口不正常: PC串口2.3脚答短接用串口调试器测 ...

  7. BUG YII2.0 cURL error 6: Could not resolve host:

    BUG描述:登录直接显示 原因:服务器设置端口权限,或者DNS毛病 解决方案:只能去服务器端设置,配置端口 DNS: 修改dns 114.114.114.114 或者 8.8.8.8

  8. Bug搬运工-CSCvi02106 :Cisco 2800, 3800, 1560 APs: when connected to a Cisco Switch CDP-4-DUPLEX_MISMATCH log is seen

    Cisco 2800, 3800, 1560 APs: when connected to a Cisco Switch CDP-4-DUPLEX_MISMATCH log is seen CSCvi ...

  9. Bug搬运工-CSCvn51483:AP datasheet should contain info if the AP contains or not temperature sensor

    目前在老一些的思科AP上,应该都没有温度传感器的功能(例如AP1600,wave 1 AP1700...),但是在思科官方没有明确的文档去说明这个问题. 在Outdoor AP(室外AP,例如AP15 ...

随机推荐

  1. C语言-基本数据类型

    一.C语言数据类型深度剖析 1.什么是数据类型? -可以理解为固定内存大小的别名 -数据类型是创建变量的模子 -数据类型是对内存的格式化操作 上面三句话如何理解? 在以前的汇编语言时代,我们要存储一些 ...

  2. Myeclipse连接Mysql数据库时报错:Error while performing database login with the pro driver:unable

    driver template: Mysql connector/j(下拉框进行选择) driver name: 任意填,最好是数据库名称,方便查找 connection URL: jdbc:mysq ...

  3. redis五大数据类型以及常用操作命令

    Redis的五大数据类型 String(字符串) string是redis最基本的类型,你可以理解成与Memcached一模一样的类型,一个key对应一个value.string类型是二进制安全的.意 ...

  4. JDBC获取超出最大连接的连接池对象

  5. HttpModule介绍

    https://cloud.tencent.com/developer/article/1347498 引言 Http 请求处理流程 和 Http Handler 介绍 这两篇文章里,我们首先了解了H ...

  6. 查询linux版本信息

    uname -a (Linux查看版本当前操作系统内核信息) cat /proc/version (Linux查看当前操作系统版本信息) cat /etc/redhat-release (Linux查 ...

  7. 2019牛客训练赛第七场 C Governing sand 权值线段树+贪心

    Governing sand 题意 森林里有m种树木,每种树木有一定高度,并且砍掉他要消耗一定的代价,问消耗最少多少代价可以使得森林中最高的树木大于所有树的一半 分析 复杂度分析:n 1e5种树木,并 ...

  8. Git的安装与使用详解

    git安装 下载安装git:采用默认配置安装即可 使用git --version确认是否安装成功,如下 GitHub使用: 配置sshkey,后续可以免密登录github cd / ssh-keyge ...

  9. POJ 3368 (ST表)

    链接:http://poj.org/problem?id=3368 题意:给出n个连续单调不递减数,q次询问,每次询问区间(L,R)出现频率最多的数,问出现了多少次 思路:因为n个数是单调不递减的,所 ...

  10. ORM表单操作

    准备工作: 1.在orm操作表单之前需要先修改下django中连接的数据库,默认连接的是SQLit3,这里我们修改成mysql 2.mysql使用的版本是5.6,已经安装好了,直接连接就可以使用 创建 ...