linux命令学习之：systemctl
systemctl命令是系统服务管理器指令，主要负责控制systemd系统和服务管理器，它实际上将 service 和 chkconfig 这两个命令组合到一起。
CentOS 7.x开始，CentOS开始使用systemd服务来代替daemon，原来管理系统启动和管理系统服务的相关命令全部由systemctl命令来代替。
Systemd是一个系统管理守护进程、工具和库的集合，用于取代System V初始进程。Systemd的功能是用于集中管理和配置类UNIX系统。
在Linux生态系统中，Systemd被部署到了大多数的标准Linux发行版中，只有为数不多的几个发行版尚未部署。Systemd通常是所有其它守护进程的父进程，但并非全是如此。
1、原来的 service 命令与 systemctl 命令对比
| daemon命令 | systemctl命令 | 说明 |
|---|---|---|
| service [服务] start | systemctl start [unit type] | 启动服务 |
| service [服务] stop | systemctl stop [unit type] | 停止服务 |
| service [服务] restart | systemctl restart [unit type] | 重启服务 |
此外还是二个systemctl参数没有与service命令参数对应
- status：参数来查看服务运行情况
- reload：重新加载服务，加载更新后的配置文件（并不是所有服务都支持这个参数，比如network.service）
示例：
#启动网络服务
systemctl start network.service #停止网络服务
systemctl stop network.service #重启网络服务
systemctl restart network.service #查看网络服务状态
systemctl status network.serivce
2、原来的chkconfig 命令与 systemctl 命令对比
| daemon命令 | systemctl命令 | 说明 |
|---|---|---|
| chkconfig [服务] on | systemctl enable [unit type] | 设置服务开机启动 |
| chkconfig [服务] off | systemctl disable [unit type] | 设备服务禁止开机启动 |
示例：
#停止cup电源管理服务
systemctl stop cups.service #禁止cups服务开机启动
systemctl disable cups.service #查看cups服务状态
systemctl status cups.service #重新设置cups服务开机启动
systemctl enable cups.service
3、查看系统上上所有的服务
命令格式：systemctl [command] [–type=TYPE] [–all]
参数详解：
command - list-units：依据unit列出所有启动的unit。加上 –all 才会列出没启动的unit; - list-unit-files:依据/usr/lib/systemd/system/ 内的启动文件，列出启动文件列表
–type=TYPE - 为unit type, 主要有service, socket, target
应用举例：
| systemctl命令 | 说明 |
|---|---|
| systemctl | 列出所有的系统服务 |
| systemctl list-units | 列出所有启动unit |
| systemctl list-unit-files | 列出所有启动文件 |
| systemctl list-units –type=service –all | 列出所有service类型的unit |
| systemctl list-units –type=service –all grep cpu | 列出 cpu电源管理机制的服务 |
| systemctl list-units –type=target –all | 列出所有target |
4、systemctl特殊的用法
| systemctl命令 | 说明 |
|---|---|
| systemctl is-active [unit type] | 查看服务是否运行 |
| systemctl is-enable [unit type] | 查看服务是否设置为开机启动 |
| systemctl mask [unit type] | 注销指定服务 |
| systemctl unmask [unit type] | 取消注销指定服务 |
应用举例：
#查看网络服务是否启动
systemctl is-active network.service #检查网络服务是否设置为开机启动
systemctl is-enable network.service #停止cups服务
systemctl stop cups.service #注销cups服务
systemctl mask cups.service #查看cups服务状态
systemctl status cups.service #取消注销cups服务
systemctl unmask cups.service
5、常用示例：
Systemctl基础、体验
1. 检查系统中是否安装有systemctl并确定当前安装的版本
[root@CTU1000094955 ~]# systemctl --version
systemd
+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN
上例中很清楚地表明，我们安装了219版本的systemctl。
2. 检查systemd和systemctl的二进制文件和库文件的安装位置
[root@CTU1000094955 ~]# whereis systemd
systemd: /usr/lib/systemd /etc/systemd /usr/share/systemd /usr/share/man/man1/systemd..gz
[root@CTU1000094955 ~]# whereis systemctl
systemctl: /usr/bin/systemctl /usr/share/man/man1/systemctl..gz
3. 检查systemd是否运行
[root@CTU1000094955 ~]# ps -eaf | grep [s]ystemd
root : ? :: /usr/lib/systemd/systemd --switched-root --system --deserialize
root : ? :: /usr/lib/systemd/systemd-journald
root : ? :: /usr/lib/systemd/systemd-udevd
dbus : ? :: /bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
root : ? :: /usr/lib/systemd/systemd-logind
注意：systemd是作为父进程（PID=1）运行的。在上面带（-e）参数的ps命令输出中，选择所有进程，（-a）选择除会话前导外的所有进程，并使用（-f）参数输出完整格式列表（即 -eaf）。
也请注意上例中后随的方括号和例子中剩余部分。方括号表达式是grep的字符类表达式的一部分。
4. 分析systemd启动进程
[root@CTU1000094955 ~]# systemd-analyze
Startup finished in 743ms (kernel) + .959s (initrd) + .696s (userspace) = .399s
5. 分析启动时各个进程花费的时间
[root@CTU1000094955 ~]# systemd-analyze blame
.859s dev-xvda1.device
.670s NetworkManager-wait-online.service
.610s plymouth-quit-wait.service
.757s systemd-udev-settle.service
.078s kdump.service
.257s mysql.service
.451s libvirtd.service
.228s postfix.service
751ms uvp-monitor.service
675ms spesserviced.service
675ms messageserviced.service
660ms tuned.service
586ms network.service
525ms accounts-daemon.service
467ms NetworkManager.service
457ms systemd-udevd.service
416ms abrt-ccpp.service
397ms firewalld.service
365ms ModemManager.service
6. 分析启动时的关键链
[root@CTU1000094955 ~]# systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character. graphical.target @.682s
?..multi-user.target @.682s
?..getty.target @.682s
?..serial-getty@hvc0.service @.681s
?..systemd-user-sessions.service @.929s +18ms
?..remote-fs.target @.921s
?..remote-fs-pre.target @.921s
?..iscsi-shutdown.service @.907s +12ms
?..network.target @.900s
?..network.service @.311s +586ms
?..NetworkManager.service @.166s +467ms
?..basic.target @.903s
?..sockets.target @.903s
?..rpcbind.socket @.903s
?..sysinit.target @.895s
?..systemd-update-utmp.service @.877s +16ms
?..auditd.service @.738s +135ms
?..systemd-tmpfiles-setup.service @.661s +73ms
?..rhel-import-state.service @.526s +134ms
?..local-fs.target @.525s
?..run-user-.mount @.041s
?..local-fs-pre.target @.615s
?..systemd-tmpfiles-setup-dev.service @
?..kmod-static-nodes.service @.473s
?..systemd-journald.socket
?..-.slice
重要：Systemctl接受服务（.service），挂载点（.mount），套接口（.socket）和设备（.device）作为单元。
7. 列出所有可用单元
[root@CTU1000094955 ~]# systemctl list-unit-files
UNIT FILE STATE
proc-sys-fs-binfmt_misc.automount static
dev-hugepages.mount static
dev-mqueue.mount static
proc-fs-nfsd.mount static
proc-sys-fs-binfmt_misc.mount static
sys-fs-fuse-connections.mount static
sys-kernel-config.mount static
sys-kernel-debug.mount static
tmp.mount disabled
var-lib-nfs-rpc_pipefs.mount static
brandbot.path disabled
cups.path enabled
systemd-ask-password-console.path static
8. 列出所有运行中单元
[root@CTU1000094955 ~]# systemctl list-units
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:-::01.1-ata2-host1-target1::-:::-block-sr0.device loaded active plugged QEMU_DVD-ROM
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-pnp0-:-tty-ttyS0.device loaded active plugged /sys/devices/pnp0/:/tty/ttyS0
sys-devices-pnp0-:-tty-ttyS1.device loaded active plugged /sys/devices/pnp0/:/tty/ttyS1
sys-devices-vbd\x2d51712-block-xvda-xvda1.device loaded active plugged /sys/devices/vbd-/block/xvda/xvda1
sys-devices-vbd\x2d51712-block-xvda-xvda2.device loaded active plugged /sys/devices/vbd-/block/xvda/xvda2
sys-devices-vbd\x2d51712-block-xvda.device loaded active plugged /sys/devices/vbd-/block/xvda
sys-devices-vbd\x2d51776-block-xvde.device loaded active plugged LVM PV I2rhCm-www3-J79i-r3ei-1XCb-a1qS-3OWSg9 on /dev/xvde
sys-devices-vif\x2d0-net-eth0.device loaded active plugged /sys/devices/vif-/net/eth0
9. 列出所有失败单元
[root@CTU1000094955 ~]# systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
?.bluetooth.service loaded failed failed Bluetooth service
?.rc-local.service loaded failed failed /etc/rc.d/rc.local Compatibility LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type. loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
10. 检查某个单元（如 cron.service）是否启用
[root@CTU1000094955 ~]# systemctl is-enabled firewalld.service
disabled
11. 检查某个单元或服务是否运行
[root@CTU1000094955 ~]# systemctl status firewalld.service
?.firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
Active: active (running) since Sat -- :: CST; 1h 29min ago
Main PID: (firewalld)
CGroup: /system.slice/firewalld.service
?.. /usr/bin/python -Es /usr/sbin/firewalld --nofork --nopid Nov :: CTU1000094955 systemd[]: Starting firewalld - dynamic firewall daemon...
Nov :: CTU1000094955 systemd[]: Started firewalld - dynamic firewall daemon.
使用Systemctl控制并管理服务
12. 列出所有服务（包括启用的和禁用的）
[root@CTU1000094955 ~]# systemctl list-unit-files --type=service
UNIT FILE STATE
abrt-ccpp.service enabled
abrt-oops.service enabled
abrt-pstoreoops.service disabled
abrt-vmcore.service enabled
abrt-xorg.service enabled
abrtd.service enabled
accounts-daemon.service enabled
alsa-restore.service static
alsa-state.service static
alsa-store.service static
anaconda-direct.service static
anaconda-nm-config.service static
anaconda-noshell.service static
anaconda-shell@.service static
13. Linux中如何启动、重启、停止、重载服务以及检查服务（如 firewalld.service）状态
[root@CTU1000094955 ~]# systemctl start httpd.service
Failed to start httpd.service: Unit httpd.service failed to load: No such file or directory.
[root@CTU1000094955 ~]# systemctl start firewalld.service
[root@CTU1000094955 ~]# systemctl restart firewalld.service
[root@CTU1000094955 ~]# systemctl stop firewalld.service
[root@CTU1000094955 ~]# systemctl reload firewalld.service
Job for firewalld.service invalid.
[root@CTU1000094955 ~]# systemctl status firewalld.service
?.firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
Active: inactive (dead) Nov :: CTU1000094955 systemd[]: Stopped firewalld - dynamic firewall daemon.
Nov :: CTU1000094955 systemd[]: Starting firewalld - dynamic firewall daemon...
Nov :: CTU1000094955 systemd[]: Started firewalld - dynamic firewall daemon.
Nov :: CTU1000094955 systemd[]: Started firewalld - dynamic firewall daemon.
Nov :: CTU1000094955 systemd[]: Stopping firewalld - dynamic firewall daemon...
Nov :: CTU1000094955 systemd[]: Starting firewalld - dynamic firewall daemon...
Nov :: CTU1000094955 systemd[]: Started firewalld - dynamic firewall daemon.
Nov :: CTU1000094955 systemd[]: Stopping firewalld - dynamic firewall daemon...
Nov :: CTU1000094955 systemd[]: Stopped firewalld - dynamic firewall daemon.
Nov :: CTU1000094955 systemd[]: Unit firewalld.service cannot be reloaded because it is inactive.
[root@CTU1000094955 ~]# systemctl restart firewalld.service
[root@CTU1000094955 ~]# systemctl reload firewalld.service
[root@CTU1000094955 ~]# systemctl status firewalld.service
?.firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
Active: active (running) since Sat -- :: CST; 8s ago
Process: ExecReload=/bin/kill -HUP $MAINPID (code=exited, status=/SUCCESS)
Main PID: (firewalld)
CGroup: /system.slice/firewalld.service
?.. /usr/bin/python -Es /usr/sbin/firewalld --nofork --nopid Nov :: CTU1000094955 systemd[]: Starting firewalld - dynamic firewall daemon...
Nov :: CTU1000094955 systemd[]: Started firewalld - dynamic firewall daemon.
Nov :: CTU1000094955 systemd[]: Reloaded firewalld - dynamic firewall daemon.
注意：当我们使用systemctl的start，restart，stop和reload命令时，我们不会从终端获取到任何输出内容，只有status命令可以打印输出。
14. 如何激活服务并在启动时启用或禁用服务（即系统启动时自动启动服务）
[root@CTU1000094955 ~]# systemctl is-active firewalld.service
active
[root@CTU1000094955 ~]# systemctl enable firewalld.service
Created symlink from /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service to /usr/lib/systemd/system/firewalld.service.
Created symlink from /etc/systemd/system/basic.target.wants/firewalld.service to /usr/lib/systemd/system/firewalld.service.
[root@CTU1000094955 ~]# systemctl list-unit-files |grep firewall
firewalld.service enabled
[root@CTU1000094955 ~]# systemctl status firewalld.service
?.firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; vendor preset: enabled)
Active: active (running) since Sat -- :: CST; 4min 6s ago
Main PID: (firewalld)
CGroup: /system.slice/firewalld.service
?.. /usr/bin/python -Es /usr/sbin/firewalld --nofork --nopid Nov :: CTU1000094955 systemd[]: Starting firewalld - dynamic firewall daemon...
Nov :: CTU1000094955 systemd[]: Started firewalld - dynamic firewall daemon.
Nov :: CTU1000094955 systemd[]: Reloaded firewalld - dynamic firewall daemon.
[root@CTU1000094955 ~]# systemctl disable firewalld.service
Removed symlink /etc/systemd/system/basic.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@CTU1000094955 ~]# systemctl list-unit-files |grep firewall
firewalld.service disabled
15. 如何屏蔽（让它不能启动）或显示服务（如 httpd.service）
[root@CTU1000094955 ~]# systemctl mask firewalld.service
Created symlink from /etc/systemd/system/firewalld.service to /dev/null.
[root@CTU1000094955 ~]# systemctl unmask firewalld.service
Removed symlink /etc/systemd/system/firewalld.service.
16. 使用systemctl命令杀死服务
[root@CTU1000094955 ~]# systemctl kill httpd
Failed to kill unit httpd.service: Unit httpd.service is not loaded.
[root@CTU1000094955 ~]# systemctl kill firewalld.service
[root@CTU1000094955 ~]# systemctl status firewalld.service
?.firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; vendor preset: enabled)
Active: inactive (dead) since Sat -- :: CST; 7s ago
Main PID: (code=exited, status=/SUCCESS) Nov :: CTU1000094955 systemd[]: Starting firewalld - dynamic firewall daemon...
Nov :: CTU1000094955 systemd[]: Started firewalld - dynamic firewall daemon.
Nov :: CTU1000094955 systemd[]: Reloaded firewalld - dynamic firewall daemon.
使用Systemctl控制并管理挂载点
17. 列出所有系统挂载点
[root@CTU1000094955 ~]# systemctl list-unit-files --type=mount
UNIT FILE STATE
dev-hugepages.mount static
dev-mqueue.mount static
proc-fs-nfsd.mount static
proc-sys-fs-binfmt_misc.mount static
sys-fs-fuse-connections.mount static
sys-kernel-config.mount static
sys-kernel-debug.mount static
tmp.mount disabled
var-lib-nfs-rpc_pipefs.mount static unit files listed.
18. 挂载、卸载、重新挂载、重载系统挂载点并检查系统中挂载点状态
[root@CTU1000094955 ~]# systemctl start tmp.mount
[root@CTU1000094955 ~]# systemctl stop tmp.mount
[root@CTU1000094955 ~]# systemctl reload tmp.mount
Job for tmp.mount invalid.
[root@CTU1000094955 ~]# systemctl status tmp.mount
?.tmp.mount - Temporary Directory
Loaded: loaded (/usr/lib/systemd/system/tmp.mount; disabled; vendor preset: disabled)
Active: inactive (dead) since Sat -- :: CST; 25s ago
Where: /tmp
What: tmpfs
Docs: man:hier()
http://www.freedesktop.org/wiki/Software/systemd/APIFileSystems
Process: ExecUnmount=/bin/umount /tmp -n (code=exited, status=/SUCCESS)
Process: ExecMount=/bin/mount tmpfs /tmp -n -t tmpfs -o mode=,strictatime (code=exited, status=/SUCCESS) Nov :: CTU1000094955 systemd[]: Mounting Temporary Directory...
Nov :: CTU1000094955 systemd[]: Mounted Temporary Directory.
Nov :: CTU1000094955 systemd[]: Unmounting Temporary Directory...
Nov :: CTU1000094955 systemd[]: Unmounted Temporary Directory.
Nov :: CTU1000094955 systemd[]: Unit tmp.mount cannot be reloaded because it is inactive.
[root@CTU1000094955 ~]# systemctl restart tmp.mount
[root@CTU1000094955 ~]# systemctl status tmp.mount
?.tmp.mount - Temporary Directory
Loaded: loaded (/usr/lib/systemd/system/tmp.mount; disabled; vendor preset: disabled)
Active: active (mounted) since Sat -- :: CST; 2s ago
Where: /tmp
What: tmpfs
Docs: man:hier()
http://www.freedesktop.org/wiki/Software/systemd/APIFileSystems
Process: ExecUnmount=/bin/umount /tmp -n (code=exited, status=/SUCCESS)
Process: ExecMount=/bin/mount tmpfs /tmp -n -t tmpfs -o mode=,strictatime (code=exited, status=/SUCCESS) Nov :: CTU1000094955 systemd[]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
Nov :: CTU1000094955 systemd[]: Mounting Temporary Directory...
Nov :: CTU1000094955 systemd[]: Mounted Temporary Directory.
[root@CTU1000094955 ~]# systemctl reload tmp.mount
19. 在启动时激活、启用或禁用挂载点（系统启动时自动挂载）
[root@CTU1000094955 ~]# systemctl is-active tmp.mount
active
[root@CTU1000094955 ~]# systemctl disable tmp.mount
Removed symlink /etc/systemd/system/local-fs.target.wants/tmp.mount.
[root@CTU1000094955 ~]# systemctl is-active tmp.mount
active
[root@CTU1000094955 ~]# systemctl enable tmp.mount
Failed to execute operation: Access denied
20. 在Linux中屏蔽（让它不能启用）或可见挂载点
[root@CTU1000094955 ~]# systemctl mask tmp.mount
ln -s '/dev/null''/etc/systemd/system/tmp.mount'
[root@CTU1000094955 ~]# systemctl unmask tmp.mount
rm '/etc/systemd/system/tmp.mount'
使用Systemctl控制并管理套接口
21. 列出所有可用系统套接口
[root@CTU1000094955 ~]# systemctl list-unit-files --type=socket
UNIT FILE STATE
avahi-daemon.socket enabled
cups.socket enabled
dbus.socket static
dm-event.socket enabled
iscsid.socket enabled
iscsiuio.socket enabled
libvirtd.socket static
lldpad.socket disabled
lvm2-lvmetad.socket enabled
lvm2-lvmpolld.socket enabled
rpcbind.socket enabled
rsyncd.socket disabled
sshd.socket disabled
syslog.socket static
systemd-initctl.socket static
systemd-journald.socket static
systemd-networkd.socket disabled
systemd-shutdownd.socket static
systemd-udevd-control.socket static
systemd-udevd-kernel.socket static
virtlockd.socket disabled unit files listed.
22. 在Linux中启动、重启、停止、重载套接口并检查其状态
[root@CTU1000094955 ~]# systemctl start sshd.socket
[root@CTU1000094955 ~]# systemctl restart sshd.socket
Failed to restart sshd.socket: Transaction contains conflicting jobs 'restart' and 'stop' for sshd-keygen.service. Probably contradicting requirement dependencies configured.
[root@CTU1000094955 ~]# systemctl status sshd.socket
?.sshd.socket - OpenSSH Server Socket
Loaded: loaded (/usr/lib/systemd/system/sshd.socket; disabled; vendor preset: disabled)
Active: active (listening) since Sat -- :: CST; 22s ago
Docs: man:sshd()
man:sshd_config()
Listen: [::]: (Stream)
Accepted: ; Connected: Nov :: CTU1000094955 systemd[]: Listening on OpenSSH Server Socket.
Nov :: CTU1000094955 systemd[]: Starting OpenSSH Server Socket.
[root@CTU1000094955 ~]# systemctl stop sshd.socket
[root@CTU1000094955 ~]# systemctl reload sshd.socket
Failed to reload sshd.socket: Job type reload is not applicable for unit sshd.socket.
[root@CTU1000094955 ~]# systemctl status sshd.socket
?.sshd.socket - OpenSSH Server Socket
Loaded: loaded (/usr/lib/systemd/system/sshd.socket; disabled; vendor preset: disabled)
Active: inactive (dead) since Sat -- :: CST; 19s ago
Docs: man:sshd()
man:sshd_config()
Listen: [::]: (Stream)
Accepted: ; Connected: Nov :: CTU1000094955 systemd[]: Listening on OpenSSH Server Socket.
Nov :: CTU1000094955 systemd[]: Starting OpenSSH Server Socket.
Nov :: CTU1000094955 systemd[]: Closed OpenSSH Server Socket.
Nov :: CTU1000094955 systemd[]: Stopping OpenSSH Server Socket.
24. 屏蔽（使它不能启动）或显示套接口
[root@CTU1000094955 ~]# systemctl mask sshd.socket
Created symlink from /etc/systemd/system/sshd.socket to /dev/null.
[root@CTU1000094955 ~]# systemctl unmask sshd.socket
Removed symlink /etc/systemd/system/sshd.socket.
服务的CPU利用率（分配额）
25. 获取当前某个服务的CPU分配额（如httpd）
[root@CTU1000094955 ~]# systemctl show -p CPUShares httpd.service
CPUShares=
注意：各个服务的默认CPU分配份额=1024，你可以增加/减少某个进程的CPU分配份额。
26. 将某个服务（httpd.service）的CPU分配份额限制为2000 CPUShares/
[root@CTU1000094955 ~]# systemctl set-property httpd.service CPUShares=
# systemctl show -p CPUShares httpd.service
CPUShares=
注意：当你为某个服务设置CPUShares，会自动创建一个以服务名命名的目录（如 httpd.service），里面包含了一个名为90-CPUShares.conf的文件，该文件含有CPUShare限制信息，你可以通过以下方式查看该文件：
[root@CTU1000094955 ~]# vi /etc/systemd/system/httpd.service.d/-CPUShares.conf
[Service]
CPUShares=
27. 检查某个服务的所有配置细节
[root@CTU1000094955 ~]# systemctl show httpd
Restart=no
NotifyAccess=none
RestartUSec=100ms
TimeoutStartUSec=1min 30s
TimeoutStopUSec=1min 30s
WatchdogUSec=
WatchdogTimestampMonotonic=
StartLimitInterval=
StartLimitBurst=
StartLimitAction=none
FailureAction=none
... ... 中间省略部分内容
28. 分析某个服务（httpd）的关键链
[root@CTU1000094955 ~]# systemd-analyze critical-chain firewalld.service
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character. firewalld.service +380ms
?..basic.target @.903s
?..sockets.target @.903s
?..rpcbind.socket @.903s
?..sysinit.target @.895s
?..systemd-update-utmp.service @.877s +16ms
?..auditd.service @.738s +135ms
?..systemd-tmpfiles-setup.service @.661s +73ms
?..rhel-import-state.service @.526s +134ms
?..local-fs.target @.525s
?..run-user-.mount @.041s
?..local-fs-pre.target @.615s
?..systemd-tmpfiles-setup-dev.service @.519s +92ms
?..kmod-static-nodes.service @.473s +44ms
?..systemd-journald.socket
?..-.slice
29. 获取某个服务（httpd）的依赖性列表
[root@CTU1000094955 ~]# systemctl list-dependencies firewalld.service
firewalld.service
?.?..system.slice
?.?..basic.target
?. ?..alsa-restore.service
?. ?..alsa-state.service
?.?.....
?. ?..microcode.service
?. ?..rhel-autorelabel-mark.service
?. ?..rhel-autorelabel.service
?. ?..rhel-configure.service
?. ?..rhel-dmesg.service
?. ?..rhel-loadmodules.service
?. ?..paths.target
?. ?..slices.target
... .... 后面省略部分内容
30. 按等级列出控制组
[root@CTU1000094955 ~]# systemd-cgls
?.. /usr/lib/systemd/systemd --switched-root --system --deserialize
?..user.slice
?.?..user-.slice
?.?.?..session-c1.scope
?.?. ?.. gdm-session-worker [pam/gdm-launch-environment]
?.?. ?.. /usr/bin/gnome-session --autostart /usr/share/gdm/greeter/autostart --session gnome-initial-setup
?.?. ?.. /usr/bin/dbus-launch --exit-with-session /usr/bin/gnome-session --autostart /usr/share/gdm/greeter/autostart --session gnome-initial-setup
?.?. ?.. /bin/dbus-daemon --fork --print-pid --print-address --session
?.?. ?.. /usr/libexec/at-spi-bus-launcher
?.?. ?.. /bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --nofork --print-address
?.?. ?.. /usr/libexec/at-spi2-registryd --use-gnome-session
?.?. ?.. gnome-shell --mode=initial-setup
... ... 中间省略部分内容
?.?. ?.. /usr/libexec/ibus-engine-simple
?.?. ?.. gnome-keyring-daemon --unlock
?.?..user-.slice
31. 按CPU、内存、输入和输出列出控制组
[root@CTU1000094955 ~]# systemd-cgtop
Path Tasks %CPU Memory Input/s Output/s / - .8G - -
/system.slice/ModemManager.service - - - -
/system.slice/NetworkManager.service - - - -
/system.slice/abrt-oops.service - - - -
/system.slice/abrt-xorg.service - - - -
/system.slice/abrtd.service - - - -
/system.slice/accounts-daemon.service - - - -
/system.slice/alsa-state.service - - - -
/system.slice/atd.service - - - -
/system.slice/auditd.service - - - -
控制系统运行等级
32. 启动系统救援模式
[root@CTU1000094955 ~]# systemctl rescue
Broadcast message from root@tecmint on pts/(Wed2015--:: IST):
The system is going down to rescue mode NOW!
33. 进入紧急模式
[root@CTU1000094955 ~]# systemctl emergency
Welcome to emergency mode!After logging in, type "journalctl -xb" to view
system logs,"systemctl reboot" to reboot,"systemctl default" to try again
to boot intodefault mode.
34. 列出当前使用的运行等级
运行等级说明如下。
- Runlevel 0 : 关闭系统 shutdown.target
- Runlevel 1 : 紧急？维护模式 emergency.target
- Runlevel 2 : 救援？维护模式 rescure.target
- Runlevel 3 : 多用户，无图形系统 multi-user.target
- Runlevel 4 : 多用户，无图形系统 无
- Runlevel 5 : 多用户，图形化系统 graphical.target
- Runlevel 6 : 关闭并重启机器 无
[root@CTU1000094955 ~]# systemctl get-default
graphical.target
35. 启动运行等级5，即图形模式
# systemctl isolate runlevel5.target
或
# systemctl isolate graphical.target [root@CTU1000094955 ~]# systemctl isolate runlevel5.target
PolicyKit daemon disconnected from the bus.
We are no longer a registered authentication agent.
36. 启动运行等级3，即多用户模式（命令行）
# systemctl isolate runlevel3.target
或
# systemctl isolate multiuser.target
36. 设置多用户模式或图形模式为默认运行等级
# systemctl set-default runlevel3.target
# systemctl set-default runlevel5.target
37. 重启、停止、挂起、休眠系统或使系统进入混合睡眠
# systemctl reboot 重新启动
# systemctl halt
# systemctl suspend 进入睡眠模式
# systemctl hibernate 进入休眠模式
# systemctl hybrid-sleep
# systemctl rescue 强制进入救援模式
# systemctl emergency 强制进入紧急救援模式
# systemctl poweroff 系统关机
linux命令学习之：systemctl的更多相关文章
- 《Linux命令学习手册》系列分享专栏
<Linux命令学习手册>系列分享专栏 <Linux命令学习手册>已整理成PDF文档,点击可直接下载至本地查阅https://www.webfalse.com/read/207 ...
- 别出心裁的Linux命令学习法
别出心裁的Linux命令学习法 操作系统操作系统为你完成所有"硬件相关.应用无关"的工作,以给你方便.效率.安全.操作系统的功能我总结为两点:管家婆和服务生: 管家婆:通过进程.虚 ...
- Linux命令学习
Linux命令学习 Ubuntu常用快捷键 •Ctrl+Alt+T: 打开终端 •Ctrl+Shift+T: 新建标签页 •Tab: 终端中命令补全 •Alt+数字N: 终端中切换到第N个标签页 •↑ ...
- Linux命令学习总结之rmdir命令的相关资料可以参考下
这篇文章主要介绍了Linux命令学习总结之rmdir命令的相关资料,需要的朋友可以参考下(http://www.nanke0834.com) 命令简介: rmdir命令用用来删除空目录,如果目录非空, ...
- linux命令学习之：chmod
chmod命令用来变更文件或目录的权限.在Linux系统家族里,文件或目录权限的控制分别以读取R.写入W.执行X3种一般权限来区分,另有3种特殊权限可供运用.用户可以使用chmod指令去变更文件与目录 ...
- Linux命令学习笔记1
1.Linux命令学习 2.Mkdir /data -创建文件夹 在/下创建文件夹 data 3.Cd -目录切换 列如cd / 4.Touch /data/1 ...
- 20155229付钰涵-虚拟机安装及LINUX命令学习
安装Ubuntu遇到的问题 问题一: 新建虚拟电脑的版本只有32-bit,与老师所给教程中的64-bit不符.为此我上百度搜寻了答案. 第一种方法: 控制面板--程序与功能--启动或关闭windows ...
- 安装虚拟机&Linux命令学习
安装虚拟机&Linux命令学习 基于VirtualBox虚拟机安装Ubuntu 1.下载安装VirtualBox 根据自己电脑(32位操作系统)的实际情况,我在网上找了相应的VirtualBo ...
- Linux命令学习笔记目录
Linux命令学习笔记目录 最近正在使用,linux,顺便将用到的命令整理了一下. 一. 文件目录操作命令: 0.linux命令学习笔记(0):man 命令 1.linux命令学习笔记(1):ls命令 ...
- (转)Linux命令学习总结：dos2unix - unix2dos
Linux命令学习总结:dos2unix - unix2dos 命令简介: 原文:http://www.cnblogs.com/kerrycode/p/5077969.html dos2unix是将W ...
随机推荐
- python反汇编函数字节码
使用dis模块 >>> def test(): ... print(1) ... a = 1 ... print(a) ... >>> from dis impor ...
- PHP多例模式介绍_PHP教程
1.多例类可以有多个实例2.多例类必须能够自我创建并管理自己的实例,并向外界提供自己的实例. 大家都知道PHP单例模式,却很少说PHP多例模式,下面是在wikipedia上看到的PHP多例模式的例子: ...
- 查看Linux物理CPU个数
查看内核版本 lsb_release -a 查看物理CPU个数.核数.逻辑CPU个数 (1)具有相同core id的CPU是同一个core的超线程. (2)具有相同physical id的CPU是同一 ...
- python实现查找算法：二分查找法
二分查找算法也称折半查找,基本思想就是折半,和平时猜数字游戏一样,比如猜的数字时67,猜测范围是0-100,则会先猜测中间值50,结果小了,所以就会从50-100猜测,中间值为75,结果大了,又从50 ...
- javaweb 学习系列【转】
http://www.cnblogs.com/xdp-gacl/category/574705.html jsp指令 http://www.cnblogs.com/huiyuantang/p/5332 ...
- R语言-画柱形图
barplot()函数 1.柱形图 > sales<-read.csv("citysales.csv",header=TRUE) #读取数据 > barplot( ...
- svn：Cannot negotiate authentication mechanism
解决方案:在eclipse->window->preference->team->svn中将svn接口设定为svnkit.
- js原型、原型链、作用链、闭包全解
https://www.2cto.com/kf/201711/698876.html [对象.变量] 一个对象就是一个类,可以理解为一个物体的标准化定义.它不是一个具体的实物,只是一个标准.而通过对象 ...
- web漏洞详解及修复建议
1.漏洞描述 跨站脚本攻击(Cross-site scripting,通常简称为XSS)发生在客户端,可被用于进行窃取隐私.钓鱼欺骗.偷取密码.传播恶意代码等攻击行为. 恶意的攻击者将对客户端有危害的 ...
- Pandas文本操作之读取操作
读写文本格式的数据 pandas中的解析函数 函数 说明 read_csv 从文件.url.文件型对象中加载带分隔符的数据,默认分隔符为逗号 read_table 从文件.url.文件型对象中加载带分 ...