Linux 下LNMP环境搭建

LNMP = Linux + Nginx + Mysql + PHP

1.0 Linux环境搭建

1.1. FastCGI介绍

1.什么是CGI(common gateway interface)
    -->通用网关接口，用于Http服务和其他机器上程序服务交流的工具
    -->CGI必须运行在网络服务器上
2.什么是FastCGI
    FastCGi是一个可伸缩地，高速地在HTTP服务器和动态脚本语言直接通信的接口(FastCGI在Linux下的socket，可以是文件socket,也可以是ip socket)
   原理：FastCGIS模式，可以将HTTP请求和解析服务器分开，同时在脚本解析服务器上启动一个或者多个脚本解析守护进程。当HTTP服务器每次遇到动态程序的时候，可以直接发送给FastCGI进程执行，然后将得到的结果返回给浏览器,这种方式可以让HTTP服务器专一地处理静态请求或者将动态脚本服务器的结果返回给客户端，提供应用整体的性能
    优点：动态语言和HTTP服务器分离开，Apache,Nginx支持这个
          是CS架构，可以提高应用的性能
          php动态语言服务器端可以启动多个FastCGI的守护进程
          http服务器通过(Nginx fastcgi_pass)FastCGI客户端和动态语言FastCGI服务端通信(php-fpm)
3.FastCGI的运行原理
    Nginx不支持外部动态程序的直接调用或者解析，所有的外部程序都必须通过FastCGI接口调用
    FastCGI在linux下是是一个socket,可以是文件socket，也可以是ipsocket
    为了调用服务器端CGI程序，还需有一个FastCGI的wrapper(相当于启动另一个程序)，绑定在固定的socket上，当Nginx将CGI请求发送给这个socket(通过FastCGI接口调用wrapper请求，然后派生出来一个新的线程，这个线程调用php解析器解析文件，并返回结果给wrapper，接着wrapper将返回的数据通过FastCGI沿着socket传递给Nginx,然后Nginx返回给客户端显示

Nginx安装

企业级Nginx详解

Mysql安装

【更多参考】

Linu下的Mysql学习详解 https://www.cnblogs.com/ftl1012/p/9296238.html

PHP环境搭建

1. yum源安装【不推荐】

 yum install php

注意：不推荐，因为安装后的文件比较散

2. 源码安装(本文以5.3为版本)

##获取php安装包【可以去官网下载最新版本】

##PHP7.X 取消了对mysql的扩展支撑，笔者20181010亲测后期安装discuz等软件会有问题

快速获取文件[php5.3.27]：链接：https://pan.baidu.com/s/1XgjsXVOTQPu5WtweIlLQ6A 密码：v1oi

cd /opt/tools
wget http://us1.php.net/distributions/php-5.3.27.tar.bz2
tar jxf php-5.3.27.tar.bz2

##检查安装php所需lib库

rpm -qa zlib-devel libxml2-devel libjpeg-turbo-devel libiconv-devel
rpm -qa freetype-devel libpng-devel gd-devel libcurl-devel libxslt-devel

##安装所需的lib包
##安装libxslt-devel前必须安装libgcrypt-devel
##libiconv-devel没有的哦

yum install -y libgcrypt-devel    -->(阿里云的yum配置)
yum install -y libxslt-devel      -->（expl也可以）
yum install zlib-devel libxml2-devel libjpeg-turbo libiconv-devel -y
yum install freetype-devel libpng-devel gd-devel libcurl-devel –y

##安装libiconv-1.15.tar.gz

wget https://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.15.tar.gz
可选：yum install gcc
tar xf libiconv-1.15.tar.gz
cd libiconv-1.15
 ./configure --prefix=/usr/local/libiconv;make;make install

##快速安装mhash -->使用epel源

wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-6.repo
yum install mhash mhash-devel -y
rpm -qa mhash mhash-devel

##安装mcrypt库
配置epel源后可以直接yum安装

yum install mcrypt
rpm -qa mcrypt

##安装libmcrypt-devel

yum install libmcrypt-devel -y 
##安装openssl

yum install openssl openssl-devel -y
rpm -qa | grep openssl

## 设置mysql

cat /etc/ld.so.conf | grep mysql                      # 查看是否有mysql信息
echo "/usr/local/mysql/lib" >>/etc/ld.so.conf  # 写入文件
ldconfig                                                         #重启

##安装php

cd /opt/tools
less INSTALL               # 查看安装帮助
touch ext/phar/phar.php    # 不创建该文件，后面安装会报错
chmod 755 ext/phar/phar.php
./configure --prefix=/usr/local/php --with-mysql=/usr/local/mysql --with-iconv-dir=/usr/local/libiconv/ --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fpm --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-xmlrpc --enable-zip --enable-soap --enable-short-tags --enable-zend-multibyte --enable-static --with-xsl --with-fpm-user=nginx --with-fpm-group=nginx --enable-ftp
make; make install

##配置PHP的解析文件 -->php.ini

[root@lnmp01 php]#cd /opt/tools/php-5.3.27
[root@lnmp01 php]# ll php.ini-*
-rw-r--r--. 1 101 101 69606 Jul 11  2013 php.ini-development  -->开发环境
-rw-r--r--. 1 101 101 69627 Jul 11  2013 php.ini-production   -->生产环境
二者的区别就是关于调试Error的开关是否开启

复制文件到php安装目录的默认配合lib下

cp /opt/tools/php-5.3.27/php.ini-production /usr/local/php/lib/php.ini

 [PHP]
 
 ;;;;;;;;;;;;;;;;;;;
 ; About php.ini   ;
 ;;;;;;;;;;;;;;;;;;;
 ; PHP's initialization file, generally called php.ini, is responsible for
 ; configuring many of the aspects of PHP's behavior.
 
 ; PHP attempts to find and load this configuration from a number of locations.
 ; The following is a summary of its search order:
 ; 1. SAPI module specific location.
 ; 2. The PHPRC environment variable. (As of PHP 5.2.0)
 ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
 ; 4. Current working directory (except CLI)
 ; 5. The web server's directory (for SAPI modules), or directory of PHP
 ; (otherwise in Windows)
 ; 6. The directory from the --with-config-file-path compile time option, or the
 ; Windows directory (C:\windows or C:\winnt)
 ; See the PHP docs for more specific information.
 ; http://php.net/configuration.file
 
 ; The syntax of the file is extremely simple.  Whitespace and lines
 ; beginning with a semicolon are silently ignored (as you probably guessed).
 ; Section headers (e.g. [Foo]) are also silently ignored, even though
 ; they might mean something in the future.
 
 ; Directives following the section heading [PATH=/www/mysite] only
 ; apply to PHP files in the /www/mysite directory.  Directives
 ; following the section heading [HOST=www.example.com] only apply to
 ; PHP files served from www.example.com.  Directives set in these
 ; special sections cannot be overridden by user-defined INI files or
 ; at runtime. Currently, [PATH=] and [HOST=] sections only work under
 ; CGI/FastCGI.
 ; http://php.net/ini.sections
 
 ; Directives are specified using the following syntax:
 ; directive = value
 ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
 ; Directives are variables used to configure PHP or PHP extensions.
 ; There is no name validation.  If PHP can't find an expected
 ; directive because it is not set or is mistyped, a default value will be used.
 
 ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
 ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
 ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
 ; previously set variable or directive (e.g. ${foo})
 
 ; Expressions in the INI file are limited to bitwise operators and parentheses:
 ; |  bitwise OR
 ; ^  bitwise XOR
 ; &  bitwise AND
 ; ~  bitwise NOT
 ; !  boolean NOT
 
 ; Boolean flags can be turned on using the values 1, On, True or Yes.
 ; They can be turned off using the values 0, Off, False or No.
 
 ; An empty string can be denoted by simply not writing anything after the equal
 ; sign, or by using the None keyword:
 
 ;  foo =         ; sets foo to an empty string
 ;  foo = None    ; sets foo to an empty string
 ;  foo = "None"  ; sets foo to the string 'None'
 
 ; If you use constants in your value, and these constants belong to a
 ; dynamically loaded extension (either a PHP extension or a Zend extension),
 ; you may only use these constants *after* the line that loads the extension.
 
 ;;;;;;;;;;;;;;;;;;;
 ; About this file ;
 ;;;;;;;;;;;;;;;;;;;
 ; PHP comes packaged with two INI files. One that is recommended to be used
 ; in production environments and one that is recommended to be used in
 ; development environments.
 
 ; php.ini-production contains settings which hold security, performance and
 ; best practices at its core. But please be aware, these settings may break
 ; compatibility with older or less security conscience applications. We
 ; recommending using the production ini in production and testing environments.
 
 ; php.ini-development is very similar to its production variant, except it's
 ; much more verbose when it comes to errors. We recommending using the
 ; development version only in development environments as errors shown to
 ; application users can inadvertently leak otherwise secure information.
 
 ;;;;;;;;;;;;;;;;;;;
 ; Quick Reference ;
 ;;;;;;;;;;;;;;;;;;;
 ; The following are all the settings which are different in either the production
 ; or development versions of the INIs with respect to PHP's default behavior.
 ; Please see the actual settings later in the document for more details as to why
 ; we recommend these changes in PHP's behavior.
 
 ; allow_call_time_pass_reference
 ;   Default Value: On
 ;   Development Value: Off
 ;   Production Value: Off
 
 ; display_errors
 ;   Default Value: On
 ;   Development Value: On
 ;   Production Value: Off
 
 ; display_startup_errors
 ;   Default Value: Off
 ;   Development Value: On
 ;   Production Value: Off
 
 ; error_reporting
 ;   Default Value: E_ALL & ~E_NOTICE
 ;   Development Value: E_ALL | E_STRICT
 ;   Production Value: E_ALL & ~E_DEPRECATED
 
 ; html_errors
 ;   Default Value: On
 ;   Development Value: On
 ;   Production value: Off
 
 ; log_errors
 ;   Default Value: Off
 ;   Development Value: On
 ;   Production Value: On
 
 ; magic_quotes_gpc
 ;   Default Value: On
 ;   Development Value: Off
 ;   Production Value: Off
 
 ; max_input_time
 ;   Default Value: -1 (Unlimited)
 ;   Development Value: 60 (60 seconds)
 ;   Production Value: 60 (60 seconds)
 
 ; output_buffering
 ;   Default Value: Off
 ;   Development Value: 4096
 ;   Production Value: 4096
 
 ; register_argc_argv
 ;   Default Value: On
 ;   Development Value: Off
 ;   Production Value: Off
 
 ; register_long_arrays
 ;   Default Value: On
 ;   Development Value: Off
 ;   Production Value: Off
 
 ; request_order
 ;   Default Value: None
 ;   Development Value: "GP"
 ;   Production Value: "GP"
 
 ; session.bug_compat_42
 ;   Default Value: On
 ;   Development Value: On
 ;   Production Value: Off
 
 ; session.bug_compat_warn
 ;   Default Value: On
 ;   Development Value: On
 ;   Production Value: Off
 
 ; session.gc_divisor
 ;   Default Value: 100
 ;   Development Value: 1000
 ;   Production Value: 1000
 
 ; session.hash_bits_per_character
 ;   Default Value: 4
 ;   Development Value: 5
 ;   Production Value: 5
 
 ; short_open_tag
 ;   Default Value: On
 ;   Development Value: Off
 ;   Production Value: Off
 
 ; track_errors
 ;   Default Value: Off
 ;   Development Value: On
 ;   Production Value: Off
 
 ; url_rewriter.tags
 ;   Default Value: "a=href,area=href,frame=src,form=,fieldset="
 ;   Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
 ;   Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
 
 ; variables_order
 ;   Default Value: "EGPCS"
 ;   Development Value: "GPCS"
 ;   Production Value: "GPCS"
 
 ;;;;;;;;;;;;;;;;;;;;
 ; php.ini Options  ;
 ;;;;;;;;;;;;;;;;;;;;
 ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
 ;user_ini.filename = ".user.ini"
 
 ; To disable this feature set this option to empty value
 ;user_ini.filename =
 
 ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
 ;user_ini.cache_ttl = 300
 
 ;;;;;;;;;;;;;;;;;;;;
 ; Language Options ;
 ;;;;;;;;;;;;;;;;;;;;
 
 ; Enable the PHP scripting language engine under Apache.
 ; http://php.net/engine
 engine = On
 
 ; This directive determines whether or not PHP will recognize code between
 ; <? and ?> tags as PHP source which should be processed as such. It's been
 ; recommended for several years that you not use the short tag "short cut" and
 ; instead to use the full <?php and ?> tag combination. With the wide spread use
 ; of XML and use of these tags by other languages, the server can become easily
 ; confused and end up parsing the wrong code in the wrong context. But because
 ; this short cut has been a feature for such a long time, it's currently still
 ; supported for backwards compatibility, but we recommend you don't use them.
 ; Default Value: On
 ; Development Value: Off
 ; Production Value: Off
 ; http://php.net/short-open-tag
 short_open_tag = Off
 
 ; Allow ASP-style <% %> tags.
 ; http://php.net/asp-tags
 asp_tags = Off
 
 ; The number of significant digits displayed in floating point numbers.
 ; http://php.net/precision
 precision = 14
 
 ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
 ; http://php.net/y2k-compliance
 y2k_compliance = On
 
 ; Output buffering is a mechanism for controlling how much output data
 ; (excluding headers and cookies) PHP should keep internally before pushing that
 ; data to the client. If your application's output exceeds this setting, PHP
 ; will send that data in chunks of roughly the size you specify.
 ; Turning on this setting and managing its maximum buffer size can yield some
 ; interesting side-effects depending on your application and web server.
 ; You may be able to send headers and cookies after you've already sent output
 ; through print or echo. You also may see performance benefits if your server is
 ; emitting less packets due to buffered output versus PHP streaming the output
 ; as it gets it. On production servers, 4096 bytes is a good setting for performance
 ; reasons.
 ; Note: Output buffering can also be controlled via Output Buffering Control
 ;   functions.
 ; Possible Values:
 ;   On = Enabled and buffer is unlimited. (Use with caution)
 ;   Off = Disabled
 ;   Integer = Enables the buffer and sets its maximum size in bytes.
 ; Note: This directive is hardcoded to Off for the CLI SAPI
 ; Default Value: Off
 ; Development Value: 4096
 ; Production Value: 4096
 ; http://php.net/output-buffering
 output_buffering = 4096
 
 ; You can redirect all of the output of your scripts to a function.  For
 ; example, if you set output_handler to "mb_output_handler", character
 ; encoding will be transparently converted to the specified encoding.
 ; Setting any output handler automatically turns on output buffering.
 ; Note: People who wrote portable scripts should not depend on this ini
 ;   directive. Instead, explicitly set the output handler using ob_start().
 ;   Using this ini directive may cause problems unless you know what script
 ;   is doing.
 ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
 ;   and you cannot use both "ob_gzhandler" and "zlib.output_compression".
 ; Note: output_handler must be empty if this is set 'On' !!!!
 ;   Instead you must use zlib.output_handler.
 ; http://php.net/output-handler
 ;output_handler =
 
 ; Transparent output compression using the zlib library
 ; Valid values for this option are 'off', 'on', or a specific buffer size
 ; to be used for compression (default is 4KB)
 ; Note: Resulting chunk size may vary due to nature of compression. PHP
 ;   outputs chunks that are few hundreds bytes each as a result of
 ;   compression. If you prefer a larger chunk size for better
 ;   performance, enable output_buffering in addition.
 ; Note: You need to use zlib.output_handler instead of the standard
 ;   output_handler, or otherwise the output will be corrupted.
 ; http://php.net/zlib.output-compression
 zlib.output_compression = Off
 
 ; http://php.net/zlib.output-compression-level
 ;zlib.output_compression_level = -1
 
 ; You cannot specify additional output handlers if zlib.output_compression
 ; is activated here. This setting does the same as output_handler but in
 ; a different order.
 ; http://php.net/zlib.output-handler
 ;zlib.output_handler =
 
 ; Implicit flush tells PHP to tell the output layer to flush itself
 ; automatically after every output block.  This is equivalent to calling the
 ; PHP function flush() after each and every call to print() or echo() and each
 ; and every HTML block.  Turning this option on has serious performance
 ; implications and is generally recommended for debugging purposes only.
 ; http://php.net/implicit-flush
 ; Note: This directive is hardcoded to On for the CLI SAPI
 implicit_flush = Off
 
 ; The unserialize callback function will be called (with the undefined class'
 ; name as parameter), if the unserializer finds an undefined class
 ; which should be instantiated. A warning appears if the specified function is
 ; not defined, or if the function doesn't include/implement the missing class.
 ; So only set this entry, if you really want to implement such a
 ; callback-function.
 unserialize_callback_func =
 
 ; When floats & doubles are serialized store serialize_precision significant
 ; digits after the floating point. The default value ensures that when floats
 ; are decoded with unserialize, the data will remain the same.
 serialize_precision = 17
 
 ; This directive allows you to enable and disable warnings which PHP will issue
 ; if you pass a value by reference at function call time. Passing values by
 ; reference at function call time is a deprecated feature which will be removed
 ; from PHP at some point in the near future. The acceptable method for passing a
 ; value by reference to a function is by declaring the reference in the functions
 ; definition, not at call time. This directive does not disable this feature, it
 ; only determines whether PHP will warn you about it or not. These warnings
 ; should enabled in development environments only.
 ; Default Value: On (Suppress warnings)
 ; Development Value: Off (Issue warnings)
 ; Production Value: Off (Issue warnings)
 ; http://php.net/allow-call-time-pass-reference
 allow_call_time_pass_reference = Off
 
 ; Safe Mode
 ; http://php.net/safe-mode
 safe_mode = Off
 
 ; By default, Safe Mode does a UID compare check when
 ; opening files. If you want to relax this to a GID compare,
 ; then turn on safe_mode_gid.
 ; http://php.net/safe-mode-gid
 safe_mode_gid = Off
 
 ; When safe_mode is on, UID/GID checks are bypassed when
 ; including files from this directory and its subdirectories.
 ; (directory must also be in include_path or full path must
 ; be used when including)
 ; http://php.net/safe-mode-include-dir
 safe_mode_include_dir =
 
 ; When safe_mode is on, only executables located in the safe_mode_exec_dir
 ; will be allowed to be executed via the exec family of functions.
 ; http://php.net/safe-mode-exec-dir
 safe_mode_exec_dir =
 
 ; Setting certain environment variables may be a potential security breach.
 ; This directive contains a comma-delimited list of prefixes.  In Safe Mode,
 ; the user may only alter environment variables whose names begin with the
 ; prefixes supplied here.  By default, users will only be able to set
 ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
 ; Note:  If this directive is empty, PHP will let the user modify ANY
 ;   environment variable!
 ; http://php.net/safe-mode-allowed-env-vars
 safe_mode_allowed_env_vars = PHP_
 
 ; This directive contains a comma-delimited list of environment variables that
 ; the end user won't be able to change using putenv().  These variables will be
 ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
 ; http://php.net/safe-mode-protected-env-vars
 safe_mode_protected_env_vars = LD_LIBRARY_PATH
 
 ; open_basedir, if set, limits all file operations to the defined directory
 ; and below.  This directive makes most sense if used in a per-directory
 ; or per-virtualhost web server configuration file. This directive is
 ; *NOT* affected by whether Safe Mode is turned On or Off.
 ; http://php.net/open-basedir
 ;open_basedir =
 
 ; This directive allows you to disable certain functions for security reasons.
 ; It receives a comma-delimited list of function names. This directive is
 ; *NOT* affected by whether Safe Mode is turned On or Off.
 ; http://php.net/disable-functions
 disable_functions =
 
 ; This directive allows you to disable certain classes for security reasons.
 ; It receives a comma-delimited list of class names. This directive is
 ; *NOT* affected by whether Safe Mode is turned On or Off.
 ; http://php.net/disable-classes
 disable_classes =
 
 ; Colors for Syntax Highlighting mode.  Anything that's acceptable in
 ; <span style="color: ???????"> would work.
 ; http://php.net/syntax-highlighting
 ;highlight.string  = #DD0000
 ;highlight.comment = #FF9900
 ;highlight.keyword = #007700
 ;highlight.bg      = #FFFFFF
 ;highlight.default = #0000BB
 ;highlight.html    = #000000
 
 ; If enabled, the request will be allowed to complete even if the user aborts
 ; the request. Consider enabling it if executing long requests, which may end up
 ; being interrupted by the user or a browser timing out. PHP's default behavior
 ; is to disable this feature.
 ; http://php.net/ignore-user-abort
 ;ignore_user_abort = On
 
 ; Determines the size of the realpath cache to be used by PHP. This value should
 ; be increased on systems where PHP opens many files to reflect the quantity of
 ; the file operations performed.
 ; http://php.net/realpath-cache-size
 ;realpath_cache_size = 16k
 
 ; Duration of time, in seconds for which to cache realpath information for a given
 ; file or directory. For systems with rarely changing files, consider increasing this
 ; value.
 ; http://php.net/realpath-cache-ttl
 ;realpath_cache_ttl = 120
 
 ; Enables or disables the circular reference collector.
 ; http://php.net/zend.enable-gc
 zend.enable_gc = On
 
 ;;;;;;;;;;;;;;;;;
 ; Miscellaneous ;
 ;;;;;;;;;;;;;;;;;
 
 ; Decides whether PHP may expose the fact that it is installed on the server
 ; (e.g. by adding its signature to the Web server header).  It is no security
 ; threat in any way, but it makes it possible to determine whether you use PHP
 ; on your server or not.
 ; http://php.net/expose-php
 expose_php = On
 
 ;;;;;;;;;;;;;;;;;;;
 ; Resource Limits ;
 ;;;;;;;;;;;;;;;;;;;
 
 ; Maximum execution time of each script, in seconds
 ; http://php.net/max-execution-time
 ; Note: This directive is hardcoded to 0 for the CLI SAPI
 max_execution_time = 300
 
 ; Maximum amount of time each script may spend parsing request data. It's a good
 ; idea to limit this time on productions servers in order to eliminate unexpectedly
 ; long running scripts.
 ; Note: This directive is hardcoded to -1 for the CLI SAPI
 ; Default Value: -1 (Unlimited)
 ; Development Value: 60 (60 seconds)
 ; Production Value: 60 (60 seconds)
 ; http://php.net/max-input-time
 
 max_input_time = 300
 
 ; Maximum input variable nesting level
 ; http://php.net/max-input-nesting-level
 ;max_input_nesting_level = 64
 
 ; How many GET/POST/COOKIE input variables may be accepted
 ; max_input_vars = 1000
 
 ; Maximum amount of memory a script may consume (128MB)
 ; http://php.net/memory-limit
 memory_limit = 128M
 
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 ; Error handling and logging ;
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
 ; This directive informs PHP of which errors, warnings and notices you would like
 ; it to take action for. The recommended way of setting values for this
 ; directive is through the use of the error level constants and bitwise
 ; operators. The error level constants are below here for convenience as well as
 ; some common settings and their meanings.
 ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
 ; those related to E_NOTICE and E_STRICT, which together cover best practices and
 ; recommended coding standards in PHP. For performance reasons, this is the
 ; recommend error reporting setting. Your production server shouldn't be wasting
 ; resources complaining about best practices and coding standards. That's what
 ; development servers and development settings are for.
 ; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
 ; means it pretty much reports everything which is exactly what you want during
 ; development and early testing.
 ;
 ; Error Level Constants:
 ; E_ALL             - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
 ; E_ERROR           - fatal run-time errors
 ; E_RECOVERABLE_ERROR  - almost fatal run-time errors
 ; E_WARNING         - run-time warnings (non-fatal errors)
 ; E_PARSE           - compile-time parse errors
 ; E_NOTICE          - run-time notices (these are warnings which often result
 ;                     from a bug in your code, but it's possible that it was
 ;                     intentional (e.g., using an uninitialized variable and
 ;                     relying on the fact it's automatically initialized to an
 ;                     empty string)
 ; E_STRICT          - run-time notices, enable to have PHP suggest changes
 ;                     to your code which will ensure the best interoperability
 ;                     and forward compatibility of your code
 ; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
 ; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
 ;                     initial startup
 ; E_COMPILE_ERROR   - fatal compile-time errors
 ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
 ; E_USER_ERROR      - user-generated error message
 ; E_USER_WARNING    - user-generated warning message
 ; E_USER_NOTICE     - user-generated notice message
 ; E_DEPRECATED      - warn about code that will not work in future versions
 ;                     of PHP
 ; E_USER_DEPRECATED - user-generated deprecation warnings
 ;
 ; Common Values:
 ;   E_ALL & ~E_NOTICE  (Show all errors, except for notices and coding standards warnings.)
 ;   E_ALL & ~E_NOTICE | E_STRICT  (Show all errors, except for notices)
 ;   E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR  (Show only errors)
 ;   E_ALL | E_STRICT  (Show all errors, warnings and notices including coding standards.)
 ; Default Value: E_ALL & ~E_NOTICE
 ; Development Value: E_ALL | E_STRICT
 ; Production Value: E_ALL & ~E_DEPRECATED
 ; http://php.net/error-reporting
 error_reporting = E_ALL & ~E_DEPRECATED
 
 ; This directive controls whether or not and where PHP will output errors,
 ; notices and warnings too. Error output is very useful during development, but
 ; it could be very dangerous in production environments. Depending on the code
 ; which is triggering the error, sensitive information could potentially leak
 ; out of your application such as database usernames and passwords or worse.
 ; It's recommended that errors be logged on production servers rather than
 ; having the errors sent to STDOUT.
 ; Possible Values:
 ;   Off = Do not display any errors
 ;   stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
 ;   On or stdout = Display errors to STDOUT
 ; Default Value: On
 ; Development Value: On
 ; Production Value: Off
 ; http://php.net/display-errors
 display_errors = Off
 
 ; The display of errors which occur during PHP's startup sequence are handled
 ; separately from display_errors. PHP's default behavior is to suppress those
 ; errors from clients. Turning the display of startup errors on can be useful in
 ; debugging configuration problems. But, it's strongly recommended that you
 ; leave this setting off on production servers.
 ; Default Value: Off
 ; Development Value: On
 ; Production Value: Off
 ; http://php.net/display-startup-errors
 display_startup_errors = Off
 
 ; Besides displaying errors, PHP can also log errors to locations such as a
 ; server-specific log, STDERR, or a location specified by the error_log
 ; directive found below. While errors should not be displayed on productions
 ; servers they should still be monitored and logging is a great way to do that.
 ; Default Value: Off
 ; Development Value: On
 ; Production Value: On
 ; http://php.net/log-errors
 log_errors = On
 
 ; Set maximum length of log_errors. In error_log information about the source is
 ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
 ; http://php.net/log-errors-max-len
 log_errors_max_len = 1024
 
 ; Do not log repeated messages. Repeated errors must occur in same file on same
 ; line unless ignore_repeated_source is set true.
 ; http://php.net/ignore-repeated-errors
 ignore_repeated_errors = Off
 
 ; Ignore source of message when ignoring repeated messages. When this setting
 ; is On you will not log errors with repeated messages from different files or
 ; source lines.
 ; http://php.net/ignore-repeated-source
 ignore_repeated_source = Off
 
 ; If this parameter is set to Off, then memory leaks will not be shown (on
 ; stdout or in the log). This has only effect in a debug compile, and if
 ; error reporting includes E_WARNING in the allowed list
 ; http://php.net/report-memleaks
 report_memleaks = On
 
 ; This setting is on by default.
 ;report_zend_debug = 0
 
 ; Store the last error/warning message in $php_errormsg (boolean). Setting this value
 ; to On can assist in debugging and is appropriate for development servers. It should
 ; however be disabled on production servers.
 ; Default Value: Off
 ; Development Value: On
 ; Production Value: Off
 ; http://php.net/track-errors
 track_errors = Off
 
 ; Turn off normal error reporting and emit XML-RPC error XML
 ; http://php.net/xmlrpc-errors
 ;xmlrpc_errors = 0
 
 ; An XML-RPC faultCode
 ;xmlrpc_error_number = 0
 
 ; When PHP displays or logs an error, it has the capability of inserting html
 ; links to documentation related to that error. This directive controls whether
 ; those HTML links appear in error messages or not. For performance and security
 ; reasons, it's recommended you disable this on production servers.
 ; Note: This directive is hardcoded to Off for the CLI SAPI
 ; Default Value: On
 ; Development Value: On
 ; Production value: Off
 ; http://php.net/html-errors
 html_errors = Off
 
 ; If html_errors is set On PHP produces clickable error messages that direct
 ; to a page describing the error or function causing the error in detail.
 ; You can download a copy of the PHP manual from http://php.net/docs
 ; and change docref_root to the base URL of your local copy including the
 ; leading '/'. You must also specify the file extension being used including
 ; the dot. PHP's default behavior is to leave these settings empty.
 ; Note: Never use this feature for production boxes.
 ; http://php.net/docref-root
 ; Examples
 ;docref_root = "/phpmanual/"
 
 ; http://php.net/docref-ext
 ;docref_ext = .html
 
 ; String to output before an error message. PHP's default behavior is to leave
 ; this setting blank.
 ; http://php.net/error-prepend-string
 ; Example:
 ;error_prepend_string = "<span style='color: #ff0000'>"
 
 ; String to output after an error message. PHP's default behavior is to leave
 ; this setting blank.
 ; http://php.net/error-append-string
 ; Example:
 ;error_append_string = "</span>"
 
 ; Log errors to specified file. PHP's default behavior is to leave this value
 ; empty.
 ; http://php.net/error-log
 ; Example:
 ;error_log = php_errors.log
 ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
 ;error_log = syslog
 
 ;windows.show_crt_warning
 ; Default value: 0
 ; Development value: 0
 ; Production value: 0
 
 ;;;;;;;;;;;;;;;;;
 ; Data Handling ;
 ;;;;;;;;;;;;;;;;;
 
 ; The separator used in PHP generated URLs to separate arguments.
 ; PHP's default setting is "&".
 ; http://php.net/arg-separator.output
 ; Example:
 ;arg_separator.output = "&amp;"
 
 ; List of separator(s) used by PHP to parse input URLs into variables.
 ; PHP's default setting is "&".
 ; NOTE: Every character in this directive is considered as separator!
 ; http://php.net/arg-separator.input
 ; Example:
 ;arg_separator.input = ";&"
 
 ; This directive determines which super global arrays are registered when PHP
 ; starts up. If the register_globals directive is enabled, it also determines
 ; what order variables are populated into the global space. G,P,C,E & S are
 ; abbreviations for the following respective super globals: GET, POST, COOKIE,
 ; ENV and SERVER. There is a performance penalty paid for the registration of
 ; these arrays and because ENV is not as commonly used as the others, ENV is
 ; is not recommended on productions servers. You can still get access to
 ; the environment variables through getenv() should you need to.
 ; Default Value: "EGPCS"
 ; Development Value: "GPCS"
 ; Production Value: "GPCS";
 ; http://php.net/variables-order
 variables_order = "GPCS"
 
 ; This directive determines which super global data (G,P,C,E & S) should
 ; be registered into the super global array REQUEST. If so, it also determines
 ; the order in which that data is registered. The values for this directive are
 ; specified in the same manner as the variables_order directive, EXCEPT one.
 ; Leaving this value empty will cause PHP to use the value set in the
 ; variables_order directive. It does not mean it will leave the super globals
 ; array REQUEST empty.
 ; Default Value: None
 ; Development Value: "GP"
 ; Production Value: "GP"
 ; http://php.net/request-order
 request_order = "GP"
 
 ; Whether or not to register the EGPCS variables as global variables.  You may
 ; want to turn this off if you don't want to clutter your scripts' global scope
 ; with user data.
 ; You should do your best to write your scripts so that they do not require
 ; register_globals to be on;  Using form variables as globals can easily lead
 ; to possible security problems, if the code is not very well thought of.
 ; http://php.net/register-globals
 register_globals = Off
 
 ; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
 ; are registered by PHP or not. As they are deprecated, we obviously don't
 ; recommend you use them. They are on by default for compatibility reasons but
 ; they are not recommended on production servers.
 ; Default Value: On
 ; Development Value: Off
 ; Production Value: Off
 ; http://php.net/register-long-arrays
 register_long_arrays = Off
 
 ; This directive determines whether PHP registers $argv & $argc each time it
 ; runs. $argv contains an array of all the arguments passed to PHP when a script
 ; is invoked. $argc contains an integer representing the number of arguments
 ; that were passed when the script was invoked. These arrays are extremely
 ; useful when running scripts from the command line. When this directive is
 ; enabled, registering these variables consumes CPU cycles and memory each time
 ; a script is executed. For performance reasons, this feature should be disabled
 ; on production servers.
 ; Note: This directive is hardcoded to On for the CLI SAPI
 ; Default Value: On
 ; Development Value: Off
 ; Production Value: Off
 ; http://php.net/register-argc-argv
 register_argc_argv = Off
 
 ; When enabled, the SERVER and ENV variables are created when they're first
 ; used (Just In Time) instead of when the script starts. If these variables
 ; are not used within a script, having this directive on will result in a
 ; performance gain. The PHP directives register_globals, register_long_arrays,
 ; and register_argc_argv must be disabled for this directive to have any affect.
 ; http://php.net/auto-globals-jit
 auto_globals_jit = On
 
 ; Maximum size of POST data that PHP will accept.
 ; http://php.net/post-max-size
 post_max_size = 16M
 
 ; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
 ; escape any character sequences in GET, POST, COOKIE and ENV data which might
 ; otherwise corrupt data being placed in resources such as databases before
 ; making that data available to you. Because of character encoding issues and
 ; non-standard SQL implementations across many databases, it's not currently
 ; possible for this feature to be 100% accurate. PHP's default behavior is to
 ; enable the feature. We strongly recommend you use the escaping mechanisms
 ; designed specifically for the database your using instead of relying on this
 ; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
 ; scheduled removed in PHP 5.4.
 ; Default Value: On
 ; Development Value: Off
 ; Production Value: Off
 ; http://php.net/magic-quotes-gpc
 magic_quotes_gpc = Off
 
 ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
 ; http://php.net/magic-quotes-runtime
 magic_quotes_runtime = Off
 
 ; Use Sybase-style magic quotes (escape ' with '' instead of \').
 ; http://php.net/magic-quotes-sybase
 magic_quotes_sybase = Off
 
 ; Automatically add files before PHP document.
 ; http://php.net/auto-prepend-file
 auto_prepend_file =
 
 ; Automatically add files after PHP document.
 ; http://php.net/auto-append-file
 auto_append_file =
 
 ; By default, PHP will output a character encoding using
 ; the Content-type: header.  To disable sending of the charset, simply
 ; set it to be empty.
 ;
 ; PHP's built-in default is text/html
 ; http://php.net/default-mimetype
 default_mimetype = "text/html"
 
 ; PHP's default character set is set to empty.
 ; http://php.net/default-charset
 ;default_charset = "iso-8859-1"
 
 ; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
 ; to disable this feature.
 ; http://php.net/always-populate-raw-post-data
 ;always_populate_raw_post_data = On
 
 ;;;;;;;;;;;;;;;;;;;;;;;;;
 ; Paths and Directories ;
 ;;;;;;;;;;;;;;;;;;;;;;;;;
 
 ; UNIX: "/path1:/path2"
 ;include_path = ".:/php/includes"
 ;
 ; Windows: "\path1;\path2"
 ;include_path = ".;c:\php\includes"
 ;
 ; PHP's default setting for include_path is ".;/path/to/php/pear"
 ; http://php.net/include-path
 
 ; The root of the PHP pages, used only if nonempty.
 ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
 ; if you are running php as a CGI under any web server (other than IIS)
 ; see documentation for security issues.  The alternate is to use the
 ; cgi.force_redirect configuration below
 ; http://php.net/doc-root
 doc_root =
 
 ; The directory under which PHP opens the script using /~username used only
 ; if nonempty.
 ; http://php.net/user-dir
 user_dir =
 
 ; Directory in which the loadable extensions (modules) reside.
 ; http://php.net/extension-dir
 ; extension_dir = "./"
 ; On windows:
 ; extension_dir = "ext"
 
 ; Whether or not to enable the dl() function.  The dl() function does NOT work
 ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
 ; disabled on them.
 ; http://php.net/enable-dl
 enable_dl = Off
 
 ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
 ; most web servers.  Left undefined, PHP turns this on by default.  You can
 ; turn it off here AT YOUR OWN RISK
 ; **You CAN safely turn this off for IIS, in fact, you MUST.**
 ; http://php.net/cgi.force-redirect
 ;cgi.force_redirect = 1
 
 ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
 ; every request. PHP's default behavior is to disable this feature.
 ;cgi.nph = 1
 
 ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
 ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
 ; will look for to know it is OK to continue execution.  Setting this variable MAY
 ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
 ; http://php.net/cgi.redirect-status-env
 ;cgi.redirect_status_env =
 
 ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI.  PHP's
 ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
 ; what PATH_INFO is.  For more information on PATH_INFO, see the cgi specs.  Setting
 ; this to 1 will cause PHP CGI to fix its paths to conform to the spec.  A setting
 ; of zero causes PHP to behave as before.  Default is 1.  You should fix your scripts
 ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
 ; http://php.net/cgi.fix-pathinfo
 ;cgi.fix_pathinfo=1
 
 ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
 ; security tokens of the calling client.  This allows IIS to define the
 ; security context that the request runs under.  mod_fastcgi under Apache
 ; does not currently support this feature (03/17/2002)
 ; Set to 1 if running under IIS.  Default is zero.
 ; http://php.net/fastcgi.impersonate
 ;fastcgi.impersonate = 1
 
 ; Disable logging through FastCGI connection. PHP's default behavior is to enable
 ; this feature.
 ;fastcgi.logging = 0
 
 ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
 ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
 ; is supported by Apache. When this option is set to 1 PHP will send
 ; RFC2616 compliant header.
 ; Default is zero.
 ; http://php.net/cgi.rfc2616-headers
 ;cgi.rfc2616_headers = 0
 
 ;;;;;;;;;;;;;;;;
 ; File Uploads ;
 ;;;;;;;;;;;;;;;;
 
 ; Whether to allow HTTP file uploads.
 ; http://php.net/file-uploads
 file_uploads = On
 
 ; Temporary directory for HTTP uploaded files (will use system default if not
 ; specified).
 ; http://php.net/upload-tmp-dir
 ;upload_tmp_dir =
 
 ; Maximum allowed size for uploaded files.
 ; http://php.net/upload-max-filesize
 upload_max_filesize = 2M
 
 ; Maximum number of files that can be uploaded via a single request
 max_file_uploads = 20
 
 ;;;;;;;;;;;;;;;;;;
 ; Fopen wrappers ;
 ;;;;;;;;;;;;;;;;;;
 
 ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
 ; http://php.net/allow-url-fopen
 allow_url_fopen = On
 
 ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
 ; http://php.net/allow-url-include
 allow_url_include = Off
 
 ; Define the anonymous ftp password (your email address). PHP's default setting
 ; for this is empty.
 ; http://php.net/from
 ;from="john@doe.com"
 
 ; Define the User-Agent string. PHP's default setting for this is empty.
 ; http://php.net/user-agent
 ;user_agent="PHP"
 
 ; Default timeout for socket based streams (seconds)
 ; http://php.net/default-socket-timeout
 default_socket_timeout = 60
 
 ; If your scripts have to deal with files from Macintosh systems,
 ; or you are running on a Mac and need to deal with files from
 ; unix or win32 systems, setting this flag will cause PHP to
 ; automatically detect the EOL character in those files so that
 ; fgets() and file() will work regardless of the source of the file.
 ; http://php.net/auto-detect-line-endings
 ;auto_detect_line_endings = Off
 
 ;;;;;;;;;;;;;;;;;;;;;;
 ; Dynamic Extensions ;
 ;;;;;;;;;;;;;;;;;;;;;;
 
 ; If you wish to have an extension loaded automatically, use the following
 ; syntax:
 ;
 ;   extension=modulename.extension
 ;
 ; For example, on Windows:
 ;
 ;   extension=msql.dll
 ;
 ; ... or under UNIX:
 ;
 ;   extension=msql.so
 ;
 ; ... or with a path:
 ;
 ;   extension=/path/to/extension/msql.so
 ;
 ; If you only provide the name of the extension, PHP will look for it in its
 ; default extension directory.
 ;
 ; Windows Extensions
 ; Note that ODBC support is built in, so no dll is needed for it.
 ; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
 ; extension folders as well as the separate PECL DLL download (PHP 5).
 ; Be sure to appropriately set the extension_dir directive.
 ;
 ;extension=php_bz2.dll
 ;extension=php_curl.dll
 ;extension=php_fileinfo.dll
 ;extension=php_gd2.dll
 ;extension=php_gettext.dll
 ;extension=php_gmp.dll
 ;extension=php_intl.dll
 ;extension=php_imap.dll
 ;extension=php_interbase.dll
 ;extension=php_ldap.dll
 ;extension=php_mbstring.dll
 ;extension=php_exif.dll      ; Must be after mbstring as it depends on it
 ;extension=php_mysql.dll
 ;extension=php_mysqli.dll
 ;extension=php_oci8.dll      ; Use with Oracle 10gR2 Instant Client
 ;extension=php_oci8_11g.dll  ; Use with Oracle 11gR2 Instant Client
 ;extension=php_openssl.dll
 ;extension=php_pdo_firebird.dll
 ;extension=php_pdo_mssql.dll
 ;extension=php_pdo_mysql.dll
 ;extension=php_pdo_oci.dll
 ;extension=php_pdo_odbc.dll
 ;extension=php_pdo_pgsql.dll
 ;extension=php_pdo_sqlite.dll
 ;extension=php_pgsql.dll
 ;extension=php_pspell.dll
 ;extension=php_shmop.dll
 
 ; The MIBS data available in the PHP distribution must be installed.
 ; See http://www.php.net/manual/en/snmp.installation.php
 ;extension=php_snmp.dll
 
 ;extension=php_soap.dll
 ;extension=php_sockets.dll
 ;extension=php_sqlite.dll
 ;extension=php_sqlite3.dll
 ;extension=php_sybase_ct.dll
 ;extension=php_tidy.dll
 ;extension=php_xmlrpc.dll
 ;extension=php_xsl.dll
 ;extension=php_zip.dll
 
 ;;;;;;;;;;;;;;;;;;;
 ; Module Settings ;
 ;;;;;;;;;;;;;;;;;;;
 
 [Date]
 ; Defines the default timezone used by the date functions
 ; http://php.net/date.timezone
 date.timezone =Asia/Shanghai
 
 ; http://php.net/date.default-latitude
 ;date.default_latitude = 31.7667
 
 ; http://php.net/date.default-longitude
 ;date.default_longitude = 35.2333
 
 ; http://php.net/date.sunrise-zenith
 ;date.sunrise_zenith = 90.583333
 
 ; http://php.net/date.sunset-zenith
 ;date.sunset_zenith = 90.583333
 
 [filter]
 ; http://php.net/filter.default
 ;filter.default = unsafe_raw
 
 ; http://php.net/filter.default-flags
 ;filter.default_flags =
 
 [iconv]
 ;iconv.input_encoding = ISO-8859-1
 ;iconv.internal_encoding = ISO-8859-1
 ;iconv.output_encoding = ISO-8859-1
 
 [intl]
 ;intl.default_locale =
 ; This directive allows you to produce PHP errors when some error
 ; happens within intl functions. The value is the level of the error produced.
 ; Default is 0, which does not produce any errors.
 ;intl.error_level = E_WARNING
 
 [sqlite]
 ; http://php.net/sqlite.assoc-case
 ;sqlite.assoc_case = 0
 
 [sqlite3]
 ;sqlite3.extension_dir =
 
 [Pcre]
 ;PCRE library backtracking limit.
 ; http://php.net/pcre.backtrack-limit
 ;pcre.backtrack_limit=100000
 
 ;PCRE library recursion limit.
 ;Please note that if you set this value to a high number you may consume all
 ;the available process stack and eventually crash PHP (due to reaching the
 ;stack size limit imposed by the Operating System).
 ; http://php.net/pcre.recursion-limit
 ;pcre.recursion_limit=100000
 
 [Pdo]
 ; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
 ; http://php.net/pdo-odbc.connection-pooling
 ;pdo_odbc.connection_pooling=strict
 
 ;pdo_odbc.db2_instance_name
 
 [Pdo_mysql]
 ; If mysqlnd is used: Number of cache slots for the internal result set cache
 ; http://php.net/pdo_mysql.cache_size
 pdo_mysql.cache_size = 2000
 
 ; Default socket name for local MySQL connects.  If empty, uses the built-in
 ; MySQL defaults.
 ; http://php.net/pdo_mysql.default-socket
 pdo_mysql.default_socket=
 
 [Phar]
 ; http://php.net/phar.readonly
 ;phar.readonly = On
 
 ; http://php.net/phar.require-hash
 ;phar.require_hash = On
 
 ;phar.cache_list =
 
 [Syslog]
 ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
 ; $LOG_CRON, etc.).  Turning it off is a good idea performance-wise.  In
 ; runtime, you can define these variables by calling define_syslog_variables().
 ; http://php.net/define-syslog-variables
 define_syslog_variables  = Off
 
 [mail function]
 ; For Win32 only.
 ; http://php.net/smtp
 SMTP = localhost
 ; http://php.net/smtp-port
 smtp_port = 25
 
 ; For Win32 only.
 ; http://php.net/sendmail-from
 ;sendmail_from = me@example.com
 
 ; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
 ; http://php.net/sendmail-path
 ;sendmail_path =
 
 ; Force the addition of the specified parameters to be passed as extra parameters
 ; to the sendmail binary. These parameters will always replace the value of
 ; the 5th parameter to mail(), even in safe mode.
 ;mail.force_extra_parameters =
 
 ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
 mail.add_x_header = On
 
 ; The path to a log file that will log all mail() calls. Log entries include
 ; the full path of the script, line number, To address and headers.
 ;mail.log =
 
 [SQL]
 ; http://php.net/sql.safe-mode
 sql.safe_mode = Off
 
 [ODBC]
 ; http://php.net/odbc.default-db
 ;odbc.default_db    =  Not yet implemented
 
 ; http://php.net/odbc.default-user
 ;odbc.default_user  =  Not yet implemented
 
 ; http://php.net/odbc.default-pw
 ;odbc.default_pw    =  Not yet implemented
 
 ; Controls the ODBC cursor model.
 ; Default: SQL_CURSOR_STATIC (default).
 ;odbc.default_cursortype
 
 ; Allow or prevent persistent links.
 ; http://php.net/odbc.allow-persistent
 odbc.allow_persistent = On
 
 ; Check that a connection is still valid before reuse.
 ; http://php.net/odbc.check-persistent
 odbc.check_persistent = On
 
 ; Maximum number of persistent links.  -1 means no limit.
 ; http://php.net/odbc.max-persistent
 odbc.max_persistent = -1
 
 ; Maximum number of links (persistent + non-persistent).  -1 means no limit.
 ; http://php.net/odbc.max-links
 odbc.max_links = -1
 
 ; Handling of LONG fields.  Returns number of bytes to variables.  0 means
 ; passthru.
 ; http://php.net/odbc.defaultlrl
 odbc.defaultlrl = 4096
 
 ; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
 ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
 ; of odbc.defaultlrl and odbc.defaultbinmode
 ; http://php.net/odbc.defaultbinmode
 odbc.defaultbinmode = 1
 
 ;birdstep.max_links = -1
 
 [Interbase]
 ; Allow or prevent persistent links.
 ibase.allow_persistent = 1
 
 ; Maximum number of persistent links.  -1 means no limit.
 ibase.max_persistent = -1
 
 ; Maximum number of links (persistent + non-persistent).  -1 means no limit.
 ibase.max_links = -1
 
 ; Default database name for ibase_connect().
 ;ibase.default_db =
 
 ; Default username for ibase_connect().
 ;ibase.default_user =
 
 ; Default password for ibase_connect().
 ;ibase.default_password =
 
 ; Default charset for ibase_connect().
 ;ibase.default_charset =
 
 ; Default timestamp format.
 ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
 
 ; Default date format.
 ibase.dateformat = "%Y-%m-%d"
 
 ; Default time format.
 ibase.timeformat = "%H:%M:%S"
 
 [MySQL]
 ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
 ; http://php.net/mysql.allow_local_infile
 mysql.allow_local_infile = On
 
 ; Allow or prevent persistent links.
 ; http://php.net/mysql.allow-persistent
 mysql.allow_persistent = On
 
 ; If mysqlnd is used: Number of cache slots for the internal result set cache
 ; http://php.net/mysql.cache_size
 mysql.cache_size = 2000
 
 ; Maximum number of persistent links.  -1 means no limit.
 ; http://php.net/mysql.max-persistent
 mysql.max_persistent = -1
 
 ; Maximum number of links (persistent + non-persistent).  -1 means no limit.
 ; http://php.net/mysql.max-links
 mysql.max_links = -1
 
 ; Default port number for mysql_connect().  If unset, mysql_connect() will use
 ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
 ; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
 ; at MYSQL_PORT.
 ; http://php.net/mysql.default-port
 mysql.default_port =
 
 ; Default socket name for local MySQL connects.  If empty, uses the built-in
 ; MySQL defaults.
 ; http://php.net/mysql.default-socket
 mysql.default_socket =
 
 ; Default host for mysql_connect() (doesn't apply in safe mode).
 ; http://php.net/mysql.default-host
 mysql.default_host =
 
 ; Default user for mysql_connect() (doesn't apply in safe mode).
 ; http://php.net/mysql.default-user
 mysql.default_user =
 
 ; Default password for mysql_connect() (doesn't apply in safe mode).
 ; Note that this is generally a *bad* idea to store passwords in this file.
 ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
 ; and reveal this password!  And of course, any users with read access to this
 ; file will be able to reveal the password as well.
 ; http://php.net/mysql.default-password
 mysql.default_password =
 
 ; Maximum time (in seconds) for connect timeout. -1 means no limit
 ; http://php.net/mysql.connect-timeout
 mysql.connect_timeout = 60
 
 ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
 ; SQL-Errors will be displayed.
 ; http://php.net/mysql.trace-mode
 mysql.trace_mode = Off
 
 [MySQLi]
 
 ; Maximum number of persistent links.  -1 means no limit.
 ; http://php.net/mysqli.max-persistent
 mysqli.max_persistent = -1
 
 ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
 ; http://php.net/mysqli.allow_local_infile
 ;mysqli.allow_local_infile = On
 
 ; Allow or prevent persistent links.
 ; http://php.net/mysqli.allow-persistent
 mysqli.allow_persistent = On
 
 ; Maximum number of links.  -1 means no limit.
 ; http://php.net/mysqli.max-links
 mysqli.max_links = -1
 
 ; If mysqlnd is used: Number of cache slots for the internal result set cache
 ; http://php.net/mysqli.cache_size
 mysqli.cache_size = 2000
 
 ; Default port number for mysqli_connect().  If unset, mysqli_connect() will use
 ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
 ; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
 ; at MYSQL_PORT.
 ; http://php.net/mysqli.default-port
 mysqli.default_port = 3306
 
 ; Default socket name for local MySQL connects.  If empty, uses the built-in
 ; MySQL defaults.
 ; http://php.net/mysqli.default-socket
 mysqli.default_socket =
 
 ; Default host for mysql_connect() (doesn't apply in safe mode).
 ; http://php.net/mysqli.default-host
 mysqli.default_host =
 
 ; Default user for mysql_connect() (doesn't apply in safe mode).
 ; http://php.net/mysqli.default-user
 mysqli.default_user =
 
 ; Default password for mysqli_connect() (doesn't apply in safe mode).
 ; Note that this is generally a *bad* idea to store passwords in this file.
 ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
 ; and reveal this password!  And of course, any users with read access to this
 ; file will be able to reveal the password as well.
 ; http://php.net/mysqli.default-pw
 mysqli.default_pw =
 
 ; Allow or prevent reconnect
 mysqli.reconnect = Off
 
 [mysqlnd]
 ; Enable / Disable collection of general statistics by mysqlnd which can be
 ; used to tune and monitor MySQL operations.
 ; http://php.net/mysqlnd.collect_statistics
 mysqlnd.collect_statistics = On
 
 ; Enable / Disable collection of memory usage statistics by mysqlnd which can be
 ; used to tune and monitor MySQL operations.
 ; http://php.net/mysqlnd.collect_memory_statistics
 mysqlnd.collect_memory_statistics = Off
 
 ; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
 ; http://php.net/mysqlnd.net_cmd_buffer_size
 ;mysqlnd.net_cmd_buffer_size = 2048
 
 ; Size of a pre-allocated buffer used for reading data sent by the server in
 ; bytes.
 ; http://php.net/mysqlnd.net_read_buffer_size
 ;mysqlnd.net_read_buffer_size = 32768
 
 [OCI8]
 
 ; Connection: Enables privileged connections using external
 ; credentials (OCI_SYSOPER, OCI_SYSDBA)
 ; http://php.net/oci8.privileged-connect
 ;oci8.privileged_connect = Off
 
 ; Connection: The maximum number of persistent OCI8 connections per
 ; process. Using -1 means no limit.
 ; http://php.net/oci8.max-persistent
 ;oci8.max_persistent = -1
 
 ; Connection: The maximum number of seconds a process is allowed to
 ; maintain an idle persistent connection. Using -1 means idle
 ; persistent connections will be maintained forever.
 ; http://php.net/oci8.persistent-timeout
 ;oci8.persistent_timeout = -1
 
 ; Connection: The number of seconds that must pass before issuing a
 ; ping during oci_pconnect() to check the connection validity. When
 ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
 ; pings completely.
 ; http://php.net/oci8.ping-interval
 ;oci8.ping_interval = 60
 
 ; Connection: Set this to a user chosen connection class to be used
 ; for all pooled server requests with Oracle 11g Database Resident
 ; Connection Pooling (DRCP).  To use DRCP, this value should be set to
 ; the same string for all web servers running the same application,
 ; the database pool must be configured, and the connection string must
 ; specify to use a pooled server.
 ;oci8.connection_class =
 
 ; High Availability: Using On lets PHP receive Fast Application
 ; Notification (FAN) events generated when a database node fails. The
 ; database must also be configured to post FAN events.
 ;oci8.events = Off
 
 ; Tuning: This option enables statement caching, and specifies how
 ; many statements to cache. Using 0 disables statement caching.
 ; http://php.net/oci8.statement-cache-size
 ;oci8.statement_cache_size = 20
 
 ; Tuning: Enables statement prefetching and sets the default number of
 ; rows that will be fetched automatically after statement execution.
 ; http://php.net/oci8.default-prefetch
 ;oci8.default_prefetch = 100
 
 ; Compatibility. Using On means oci_close() will not close
 ; oci_connect() and oci_new_connect() connections.
 ; http://php.net/oci8.old-oci-close-semantics
 ;oci8.old_oci_close_semantics = Off
 
 [PostgreSQL]
 ; Allow or prevent persistent links.
 ; http://php.net/pgsql.allow-persistent
 pgsql.allow_persistent = On
 
 ; Detect broken persistent links always with pg_pconnect().
 ; Auto reset feature requires a little overheads.
 ; http://php.net/pgsql.auto-reset-persistent
 pgsql.auto_reset_persistent = Off
 
 ; Maximum number of persistent links.  -1 means no limit.
 ; http://php.net/pgsql.max-persistent
 pgsql.max_persistent = -1
 
 ; Maximum number of links (persistent+non persistent).  -1 means no limit.
 ; http://php.net/pgsql.max-links
 pgsql.max_links = -1
 
 ; Ignore PostgreSQL backends Notice message or not.
 ; Notice message logging require a little overheads.
 ; http://php.net/pgsql.ignore-notice
 pgsql.ignore_notice = 0
 
 ; Log PostgreSQL backends Notice message or not.
 ; Unless pgsql.ignore_notice=0, module cannot log notice message.
 ; http://php.net/pgsql.log-notice
 pgsql.log_notice = 0
 
 [Sybase-CT]
 ; Allow or prevent persistent links.
 ; http://php.net/sybct.allow-persistent
 sybct.allow_persistent = On
 
 ; Maximum number of persistent links.  -1 means no limit.
 ; http://php.net/sybct.max-persistent
 sybct.max_persistent = -1
 
 ; Maximum number of links (persistent + non-persistent).  -1 means no limit.
 ; http://php.net/sybct.max-links
 sybct.max_links = -1
 
 ; Minimum server message severity to display.
 ; http://php.net/sybct.min-server-severity
 sybct.min_server_severity = 10
 
 ; Minimum client message severity to display.
 ; http://php.net/sybct.min-client-severity
 sybct.min_client_severity = 10
 
 ; Set per-context timeout
 ; http://php.net/sybct.timeout
 ;sybct.timeout=
 
 ;sybct.packet_size
 
 ; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
 ; Default: one minute
 ;sybct.login_timeout=
 
 ; The name of the host you claim to be connecting from, for display by sp_who.
 ; Default: none
 ;sybct.hostname=
 
 ; Allows you to define how often deadlocks are to be retried. -1 means "forever".
 ; Default: 0
 ;sybct.deadlock_retry_count=
 
 [bcmath]
 ; Number of decimal digits for all bcmath functions.
 ; http://php.net/bcmath.scale
 bcmath.scale = 0
 
 [browscap]
 ; http://php.net/browscap
 ;browscap = extra/browscap.ini
 
 [Session]
 ; Handler used to store/retrieve data.
 ; http://php.net/session.save-handler
 session.save_handler = files
 
 ; Argument passed to save_handler.  In the case of files, this is the path
 ; where data files are stored. Note: Windows users have to change this
 ; variable in order to use PHP's session functions.
 ;
 ; The path can be defined as:
 ;
 ;     session.save_path = "N;/path"
 ;
 ; where N is an integer.  Instead of storing all the session files in
 ; /path, what this will do is use subdirectories N-levels deep, and
 ; store the session data in those directories.  This is useful if you
 ; or your OS have problems with lots of files in one directory, and is
 ; a more efficient layout for servers that handle lots of sessions.
 ;
 ; NOTE 1: PHP will not create this directory structure automatically.
 ;         You can use the script in the ext/session dir for that purpose.
 ; NOTE 2: See the section on garbage collection below if you choose to
 ;         use subdirectories for session storage
 ;
 ; The file storage module creates files using mode 600 by default.
 ; You can change that by using
 ;
 ;     session.save_path = "N;MODE;/path"
 ;
 ; where MODE is the octal representation of the mode. Note that this
 ; does not overwrite the process's umask.
 ; http://php.net/session.save-path
 ;session.save_path = "/tmp"
 
 ; Whether to use cookies.
 ; http://php.net/session.use-cookies
 session.use_cookies = 1
 
 ; http://php.net/session.cookie-secure
 ;session.cookie_secure =
 
 ; This option forces PHP to fetch and use a cookie for storing and maintaining
 ; the session id. We encourage this operation as it's very helpful in combating
 ; session hijacking when not specifying and managing your own session id. It is
 ; not the end all be all of session hijacking defense, but it's a good start.
 ; http://php.net/session.use-only-cookies
 session.use_only_cookies = 1
 
 ; Name of the session (used as cookie name).
 ; http://php.net/session.name
 session.name = PHPSESSID
 
 ; Initialize session on request startup.
 ; http://php.net/session.auto-start
 session.auto_start = 0
 
 ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
 ; http://php.net/session.cookie-lifetime
 session.cookie_lifetime = 0
 
 ; The path for which the cookie is valid.
 ; http://php.net/session.cookie-path
 session.cookie_path = /
 
 ; The domain for which the cookie is valid.
 ; http://php.net/session.cookie-domain
 session.cookie_domain =
 
 ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
 ; http://php.net/session.cookie-httponly
 session.cookie_httponly =
 
 ; Handler used to serialize data.  php is the standard serializer of PHP.
 ; http://php.net/session.serialize-handler
 session.serialize_handler = php
 
 ; Defines the probability that the 'garbage collection' process is started
 ; on every session initialization. The probability is calculated by using
 ; gc_probability/gc_divisor. Where session.gc_probability is the numerator
 ; and gc_divisor is the denominator in the equation. Setting this value to 1
 ; when the session.gc_divisor value is 100 will give you approximately a 1% chance
 ; the gc will run on any give request.
 ; Default Value: 1
 ; Development Value: 1
 ; Production Value: 1
 ; http://php.net/session.gc-probability
 session.gc_probability = 1
 
 ; Defines the probability that the 'garbage collection' process is started on every
 ; session initialization. The probability is calculated by using the following equation:
 ; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
 ; session.gc_divisor is the denominator in the equation. Setting this value to 1
 ; when the session.gc_divisor value is 100 will give you approximately a 1% chance
 ; the gc will run on any give request. Increasing this value to 1000 will give you
 ; a 0.1% chance the gc will run on any give request. For high volume production servers,
 ; this is a more efficient approach.
 ; Default Value: 100
 ; Development Value: 1000
 ; Production Value: 1000
 ; http://php.net/session.gc-divisor
 session.gc_divisor = 1000
 
 ; After this number of seconds, stored data will be seen as 'garbage' and
 ; cleaned up by the garbage collection process.
 ; http://php.net/session.gc-maxlifetime
 session.gc_maxlifetime = 1440
 
 ; NOTE: If you are using the subdirectory option for storing session files
 ;       (see session.save_path above), then garbage collection does *not*
 ;       happen automatically.  You will need to do your own garbage
 ;       collection through a shell script, cron entry, or some other method.
 ;       For example, the following script would is the equivalent of
 ;       setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
 ;          find /path/to/sessions -cmin +24 | xargs rm
 
 ; PHP 4.2 and less have an undocumented feature/bug that allows you to
 ; to initialize a session variable in the global scope, even when register_globals
 ; is disabled.  PHP 4.3 and later will warn you, if this feature is used.
 ; You can disable the feature and the warning separately. At this time,
 ; the warning is only displayed, if bug_compat_42 is enabled. This feature
 ; introduces some serious security problems if not handled correctly. It's
 ; recommended that you do not use this feature on production servers. But you
 ; should enable this on development servers and enable the warning as well. If you
 ; do not enable the feature on development servers, you won't be warned when it's
 ; used and debugging errors caused by this can be difficult to track down.
 ; Default Value: On
 ; Development Value: On
 ; Production Value: Off
 ; http://php.net/session.bug-compat-42
 session.bug_compat_42 = Off
 
 ; This setting controls whether or not you are warned by PHP when initializing a
 ; session value into the global space. session.bug_compat_42 must be enabled before
 ; these warnings can be issued by PHP. See the directive above for more information.
 ; Default Value: On
 ; Development Value: On
 ; Production Value: Off
 ; http://php.net/session.bug-compat-warn
 session.bug_compat_warn = Off
 
 ; Check HTTP Referer to invalidate externally stored URLs containing ids.
 ; HTTP_REFERER has to contain this substring for the session to be
 ; considered as valid.
 ; http://php.net/session.referer-check
 session.referer_check =
 
 ; How many bytes to read from the file.
 ; http://php.net/session.entropy-length
 session.entropy_length = 0
 
 ; Specified here to create the session id.
 ; http://php.net/session.entropy-file
 ; On systems that don't have /dev/urandom /dev/arandom can be used
 ; On windows, setting the entropy_length setting will activate the
 ; Windows random source (using the CryptoAPI)
 ;session.entropy_file = /dev/urandom
 
 ; Set to {nocache,private,public,} to determine HTTP caching aspects
 ; or leave this empty to avoid sending anti-caching headers.
 ; http://php.net/session.cache-limiter
 session.cache_limiter = nocache
 
 ; Document expires after n minutes.
 ; http://php.net/session.cache-expire
 session.cache_expire = 180
 
 ; trans sid support is disabled by default.
 ; Use of trans sid may risk your users security.
 ; Use this option with caution.
 ; - User may send URL contains active session ID
 ;   to other person via. email/irc/etc.
 ; - URL that contains active session ID may be stored
 ;   in publicly accessible computer.
 ; - User may access your site with the same session ID
 ;   always using URL stored in browser's history or bookmarks.
 ; http://php.net/session.use-trans-sid
 session.use_trans_sid = 0
 
 ; Select a hash function for use in generating session ids.
 ; Possible Values
 ;   0  (MD5 128 bits)
 ;   1  (SHA-1 160 bits)
 ; This option may also be set to the name of any hash function supported by
 ; the hash extension. A list of available hashes is returned by the hash_algos()
 ; function.
 ; http://php.net/session.hash-function
 session.hash_function = 0
 
 ; Define how many bits are stored in each character when converting
 ; the binary hash data to something readable.
 ; Possible values:
 ;   4  (4 bits: 0-9, a-f)
 ;   5  (5 bits: 0-9, a-v)
 ;   6  (6 bits: 0-9, a-z, A-Z, "-", ",")
 ; Default Value: 4
 ; Development Value: 5
 ; Production Value: 5
 ; http://php.net/session.hash-bits-per-character
 session.hash_bits_per_character = 5
 
 ; The URL rewriter will look for URLs in a defined set of HTML tags.
 ; form/fieldset are special; if you include them here, the rewriter will
 ; add a hidden <input> field with the info which is otherwise appended
 ; to URLs.  If you want XHTML conformity, remove the form entry.
 ; Note that all valid entries require a "=", even if no value follows.
 ; Default Value: "a=href,area=href,frame=src,form=,fieldset="
 ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
 ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
 ; http://php.net/url-rewriter.tags
 url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
 
 [MSSQL]
 ; Allow or prevent persistent links.
 mssql.allow_persistent = On
 
 ; Maximum number of persistent links.  -1 means no limit.
 mssql.max_persistent = -1
 
 ; Maximum number of links (persistent+non persistent).  -1 means no limit.
 mssql.max_links = -1
 
 ; Minimum error severity to display.
 mssql.min_error_severity = 10
 
 ; Minimum message severity to display.
 mssql.min_message_severity = 10
 
 ; Compatibility mode with old versions of PHP 3.0.
 mssql.compatability_mode = Off
 
 ; Connect timeout
 ;mssql.connect_timeout = 5
 
 ; Query timeout
 ;mssql.timeout = 60
 
 ; Valid range 0 - 2147483647.  Default = 4096.
 ;mssql.textlimit = 4096
 
 ; Valid range 0 - 2147483647.  Default = 4096.
 ;mssql.textsize = 4096
 
 ; Limits the number of records in each batch.  0 = all records in one batch.
 ;mssql.batchsize = 0
 
 ; Specify how datetime and datetim4 columns are returned
 ; On => Returns data converted to SQL server settings
 ; Off => Returns values as YYYY-MM-DD hh:mm:ss
 ;mssql.datetimeconvert = On
 
 ; Use NT authentication when connecting to the server
 mssql.secure_connection = Off
 
 ; Specify max number of processes. -1 = library default
 ; msdlib defaults to 25
 ; FreeTDS defaults to 4096
 ;mssql.max_procs = -1
 
 ; Specify client character set.
 ; If empty or not set the client charset from freetds.conf is used
 ; This is only used when compiled with FreeTDS
 ;mssql.charset = "ISO-8859-1"
 
 [Assertion]
 ; Assert(expr); active by default.
 ; http://php.net/assert.active
 ;assert.active = On
 
 ; Issue a PHP warning for each failed assertion.
 ; http://php.net/assert.warning
 ;assert.warning = On
 
 ; Don't bail out by default.
 ; http://php.net/assert.bail
 ;assert.bail = Off
 
 ; User-function to be called if an assertion fails.
 ; http://php.net/assert.callback
 ;assert.callback = 0
 
 ; Eval the expression with current error_reporting().  Set to true if you want
 ; error_reporting(0) around the eval().
 ; http://php.net/assert.quiet-eval
 ;assert.quiet_eval = 0
 
 [COM]
 ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
 ; http://php.net/com.typelib-file
 ;com.typelib_file =
 
 ; allow Distributed-COM calls
 ; http://php.net/com.allow-dcom
 ;com.allow_dcom = true
 
 ; autoregister constants of a components typlib on com_load()
 ; http://php.net/com.autoregister-typelib
 ;com.autoregister_typelib = true
 
 ; register constants casesensitive
 ; http://php.net/com.autoregister-casesensitive
 ;com.autoregister_casesensitive = false
 
 ; show warnings on duplicate constant registrations
 ; http://php.net/com.autoregister-verbose
 ;com.autoregister_verbose = true
 
 ; The default character set code-page to use when passing strings to and from COM objects.
 ; Default: system ANSI code page
 ;com.code_page=
 
 [mbstring]
 ; language for internal character representation.
 ; http://php.net/mbstring.language
 ;mbstring.language = Japanese
 
 ; internal/script encoding.
 ; Some encoding cannot work as internal encoding.
 ; (e.g. SJIS, BIG5, ISO-2022-*)
 ; http://php.net/mbstring.internal-encoding
 ;mbstring.internal_encoding = EUC-JP
 
 ; http input encoding.
 ; http://php.net/mbstring.http-input
 ;mbstring.http_input = auto
 
 ; http output encoding. mb_output_handler must be
 ; registered as output buffer to function
 ; http://php.net/mbstring.http-output
 ;mbstring.http_output = SJIS
 
 ; enable automatic encoding translation according to
 ; mbstring.internal_encoding setting. Input chars are
 ; converted to internal encoding by setting this to On.
 ; Note: Do _not_ use automatic encoding translation for
 ;       portable libs/applications.
 ; http://php.net/mbstring.encoding-translation
 ;mbstring.encoding_translation = Off
 
 ; automatic encoding detection order.
 ; auto means
 ; http://php.net/mbstring.detect-order
 ;mbstring.detect_order = auto
 
 ; substitute_character used when character cannot be converted
 ; one from another
 ; http://php.net/mbstring.substitute-character
 ;mbstring.substitute_character = none;
 
 ; overload(replace) single byte functions by mbstring functions.
 ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
 ; etc. Possible values are 0,1,2,4 or combination of them.
 ; For example, 7 for overload everything.
 ; 0: No overload
 ; 1: Overload mail() function
 ; 2: Overload str*() functions
 ; 4: Overload ereg*() functions
 ; http://php.net/mbstring.func-overload
 ;mbstring.func_overload = 0
 
 ; enable strict encoding detection.
 ;mbstring.strict_detection = Off
 
 ; This directive specifies the regex pattern of content types for which mb_output_handler()
 ; is activated.
 ; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
 ;mbstring.http_output_conv_mimetype=
 
 ; Allows to set script encoding. Only affects if PHP is compiled with --enable-zend-multibyte
 ; Default: ""
 ;mbstring.script_encoding=
 
 [gd]
 ; Tell the jpeg decode to ignore warnings and try to create
 ; a gd image. The warning will then be displayed as notices
 ; disabled by default
 ; http://php.net/gd.jpeg-ignore-warning
 ;gd.jpeg_ignore_warning = 0
 
 [exif]
 ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
 ; With mbstring support this will automatically be converted into the encoding
 ; given by corresponding encode setting. When empty mbstring.internal_encoding
 ; is used. For the decode settings you can distinguish between motorola and
 ; intel byte order. A decode setting cannot be empty.
 ; http://php.net/exif.encode-unicode
 ;exif.encode_unicode = ISO-8859-15
 
 ; http://php.net/exif.decode-unicode-motorola
 ;exif.decode_unicode_motorola = UCS-2BE
 
 ; http://php.net/exif.decode-unicode-intel
 ;exif.decode_unicode_intel    = UCS-2LE
 
 ; http://php.net/exif.encode-jis
 ;exif.encode_jis =
 
 ; http://php.net/exif.decode-jis-motorola
 ;exif.decode_jis_motorola = JIS
 
 ; http://php.net/exif.decode-jis-intel
 ;exif.decode_jis_intel    = JIS
 
 [Tidy]
 ; The path to a default tidy configuration file to use when using tidy
 ; http://php.net/tidy.default-config
 ;tidy.default_config = /usr/local/lib/php/default.tcfg
 
 ; Should tidy clean and repair output automatically?
 ; WARNING: Do not use this option if you are generating non-html content
 ; such as dynamic images
 ; http://php.net/tidy.clean-output
 tidy.clean_output = Off
 
 [soap]
 ; Enables or disables WSDL caching feature.
 ; http://php.net/soap.wsdl-cache-enabled
 soap.wsdl_cache_enabled=1
 
 ; Sets the directory name where SOAP extension will put cache files.
 ; http://php.net/soap.wsdl-cache-dir
 soap.wsdl_cache_dir="/tmp"
 
 ; (time to live) Sets the number of second while cached file will be used
 ; instead of original one.
 ; http://php.net/soap.wsdl-cache-ttl
 soap.wsdl_cache_ttl=86400
 
 ; Sets the size of the cache limit. (Max. number of WSDL files to cache)
 soap.wsdl_cache_limit = 5
 
 [sysvshm]
 ; A default size of the shared memory segment
 ;sysvshm.init_mem = 10000
 
 [ldap]
 ; Sets the maximum number of open links or -1 for unlimited.
 ldap.max_links = -1
 
 [mcrypt]
 ; For more information about mcrypt settings see http://php.net/mcrypt-module-open
 
 ; Directory where to load mcrypt algorithms
 ; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
 ;mcrypt.algorithms_dir=
 
 ; Directory where to load mcrypt modes
 ; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
 ;mcrypt.modes_dir=
 
 [dba]
 ;dba.default_handler=
 
 [xsl]
 ; Write operations from within XSLT are disabled by default.
 ; XSL_SECPREF_CREATE_DIRECTORY | XSL_SECPREF_WRITE_NETWORK | XSL_SECPREF_WRITE_FILE = 44
 ; Set it to 0 to allow all operations
 ;xsl.security_prefs = 44
 
 ; Local Variables:
 ; tab-width: 4
 ; End:
 extension = "gettext.so"

php.ini

##配置PHP的进程管理文件 -->php-fpm

cd  /usr/local/php/etc
cp php-fpm.conf.default  php-fpm.conf
vim php-fpm.conf              -->参见04.php-fpm_config.conf

;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;
 
; All relative paths in this configuration file are relative to PHP's install
; prefix (/usr/local/php-5.3.27). This prefix can be dynamicaly changed by using the
; '-p' argument from the command line.
 
; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.
; Relative path can also be used. They will be prefixed by:
;  - the global prefix if it's been set (-p arguement)
;  - /usr/local/php-5.3.27 otherwise
;include=etc/fpm.d/*.conf
 
;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;
 
[global]
; Pid file
; Note: the default prefix is /usr/local/php-5.3.27/var
; Default Value: none
pid = /usr/local/php/logs/php-fpm.pid
 
; Error log file
; If it's set to "syslog", log is sent to syslogd instead of being written
; in a local file.
; Note: the default prefix is /usr/local/php-5.3.27/var
; Default Value: log/php-fpm.log
error_log = /usr/local/php/logs/php-fpm.log
 
; syslog_facility is used to specify what type of program is logging the
; message. This lets syslogd specify that messages from different facilities
; will be handled differently.
; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
; Default Value: daemon
;syslog.facility = daemon
 
; syslog_ident is prepended to every message. If you have multiple FPM
; instances running on the same server, you can change the default value
; which must suit common needs.
; Default Value: php-fpm
;syslog.ident = php-fpm
 
; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
log_level = error
 
; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
;emergency_restart_threshold = 0
 
; Interval of time used by emergency_restart_interval to determine when
; a graceful restart will be initiated.  This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;emergency_restart_interval = 0
 
; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;process_control_timeout = 0
 
; The maximum number of processes FPM will fork. This has been design to control
; the global number of processes when using dynamic PM within a lot of pools.
; Use it with caution.
; Note: A value of 0 indicates no limit
; Default Value: 0
; process.max = 128
 
; Specify the nice(2) priority to apply to the master process (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool process will inherit the master process priority
;         unless it specified otherwise
; Default Value: no set
; process.priority = -19
 
; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
; Default Value: yes
;daemonize = yes
 
; Set open file descriptor rlimit for the master process.
; Default Value: system defined value
rlimit_files = 32768
 
; Set max core size rlimit for the master process.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0
 
; Specify the event mechanism FPM will use. The following is available:
; - select     (any POSIX os)
; - poll       (any POSIX os)
; - epoll      (linux >= 2.5.44)
; - kqueue     (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
; - /dev/poll  (Solaris >= 7)
; - port       (Solaris >= 10)
; Default Value: not set (auto detection)
events.mechanism = epoll
 
;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;
 
; Multiple pools of child processes may be started with different listening
; ports and different management options.  The name of the pool will be
; used in logs and stats. There is no limitation on the number of pools which
; FPM can handle. Your system will tell you anyway :)
 
; Start a new pool named 'www'.
; the variable $pool can we used in any directive and will be replaced by the
; pool name ('www' here)
[www]
 
; Per pool prefix
; It only applies on the following directives:
; - 'slowlog'
; - 'listen' (unixsocket)
; - 'chroot'
; - 'chdir'
; - 'php_values'
; - 'php_admin_values'
; When not set, the global prefix (or /usr/local/php-5.3.27) applies instead.
; Note: This directive can also be relative to the global prefix.
; Default Value: none
;prefix = /path/to/pools/$pool
 
; Unix user/group of processes
; Note: The user is mandatory. If the group is not set, the default user's group
;       will be used.
user = nginx
group = nginx
 
; The address on which to accept FastCGI requests.
; Valid syntaxes are:
;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific address on
;                            a specific port;
;   'port'                 - to listen on a TCP socket to all addresses on a
;                            specific port;
;   '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
listen = 127.0.0.1:9000
 
; Set listen(2) backlog. A value of '-1' means unlimited.
; Default Value: 128 (-1 on FreeBSD and OpenBSD)
;listen.backlog = -1
 
; Set permissions for unix socket, if one is used. In Linux, read/write
; permissions must be set in order to allow connections from a web server. Many
; BSD-derived systems allow connections regardless of permissions.
; Default Values: user and group are set as the running user
;                 mode is set to 0666
listen.owner = nginx
listen.group = nginx
;listen.mode = 0666
 
; List of ipv4 addresses of FastCGI clients which are allowed to connect.
; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
; must be separated by a comma. If this value is left blank, connections will be
; accepted from any ip address.
; Default Value: any
;listen.allowed_clients = 127.0.0.1
 
; Specify the nice(2) priority to apply to the pool processes (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool processes will inherit the master process priority
;         unless it specified otherwise
; Default Value: no set
; priority = -19
 
; Choose how the process manager will control the number of child processes.
; Possible Values:
;   static  - a fixed number (pm.max_children) of child processes;
;   dynamic - the number of child processes are set dynamically based on the
;             following directives. With this process management, there will be
;             always at least 1 children.
;             pm.max_children      - the maximum number of children that can
;                                    be alive at the same time.
;             pm.start_servers     - the number of children created on startup.
;             pm.min_spare_servers - the minimum number of children in 'idle'
;                                    state (waiting to process). If the number
;                                    of 'idle' processes is less than this
;                                    number then some children will be created.
;             pm.max_spare_servers - the maximum number of children in 'idle'
;                                    state (waiting to process). If the number
;                                    of 'idle' processes is greater than this
;                                    number then some children will be killed.
;  ondemand - no children are created at startup. Children will be forked when
;             new requests will connect. The following parameter are used:
;             pm.max_children           - the maximum number of children that
;                                         can be alive at the same time.
;             pm.process_idle_timeout   - The number of seconds after which
;                                         an idle process will be killed.
; Note: This value is mandatory.
pm = dynamic
 
; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI. The below defaults are based on a server without much resources. Don't
; forget to tweak pm.* to fit your needs.
; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
; Note: This value is mandatory.
pm.max_children = 1024
 
; The number of child processes created on startup.
; Note: Used only when pm is set to 'dynamic'
; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
pm.start_servers = 16
 
; The desired minimum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.min_spare_servers = 5
 
; The desired maximum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.max_spare_servers = 20
 
; The number of seconds after which an idle process will be killed.
; Note: Used only when pm is set to 'ondemand'
; Default Value: 10s
pm.process_idle_timeout = 15s;
 
; The number of requests each child process should execute before respawning.
; This can be useful to work around memory leaks in 3rd party libraries. For
; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
; Default Value: 0
pm.max_requests = 2048
 
; The URI to view the FPM status page. If this value is not set, no URI will be
; recognized as a status page. It shows the following informations:
;   pool                 - the name of the pool;
;   process manager      - static, dynamic or ondemand;
;   start time           - the date and time FPM has started;
;   start since          - number of seconds since FPM has started;
;   accepted conn        - the number of request accepted by the pool;
;   listen queue         - the number of request in the queue of pending
;                          connections (see backlog in listen(2));
;   max listen queue     - the maximum number of requests in the queue
;                          of pending connections since FPM has started;
;   listen queue len     - the size of the socket queue of pending connections;
;   idle processes       - the number of idle processes;
;   active processes     - the number of active processes;
;   total processes      - the number of idle + active processes;
;   max active processes - the maximum number of active processes since FPM
;                          has started;
;   max children reached - number of times, the process limit has been reached,
;                          when pm tries to start more children (works only for
;                          pm 'dynamic' and 'ondemand');
; Value are updated in real time.
; Example output:
;   pool:                 www
;   process manager:      static
;   start time:           01/Jul/2011:17:53:49 +0200
;   start since:          62636
;   accepted conn:        190460
;   listen queue:         0
;   max listen queue:     1
;   listen queue len:     42
;   idle processes:       4
;   active processes:     11
;   total processes:      15
;   max active processes: 12
;   max children reached: 0
;
; By default the status page output is formatted as text/plain. Passing either
; 'html', 'xml' or 'json' in the query string will return the corresponding
; output syntax. Example:
;   http://www.foo.bar/status
;   http://www.foo.bar/status?json
;   http://www.foo.bar/status?html
;   http://www.foo.bar/status?xml
;
; By default the status page only outputs short status. Passing 'full' in the
; query string will also return status for each pool process.
; Example:
;   http://www.foo.bar/status?full
;   http://www.foo.bar/status?json&full
;   http://www.foo.bar/status?html&full
;   http://www.foo.bar/status?xml&full
; The Full status returns for each process:
;   pid                  - the PID of the process;
;   state                - the state of the process (Idle, Running, ...);
;   start time           - the date and time the process has started;
;   start since          - the number of seconds since the process has started;
;   requests             - the number of requests the process has served;
;   request duration     - the duration in 碌s of the requests;
;   request method       - the request method (GET, POST, ...);
;   request URI          - the request URI with the query string;
;   content length       - the content length of the request (only with POST);
;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
;   script               - the main script called (or '-' if not set);
;   last request cpu     - the %cpu the last request consumed
;                          it's always 0 if the process is not in Idle state
;                          because CPU calculation is done when the request
;                          processing has terminated;
;   last request memory  - the max amount of memory the last request consumed
;                          it's always 0 if the process is not in Idle state
;                          because memory calculation is done when the request
;                          processing has terminated;
; If the process is in Idle state, then informations are related to the
; last request the process has served. Otherwise informations are related to
; the current request being served.
; Example output:
;   ************************
;   pid:                  31330
;   state:                Running
;   start time:           01/Jul/2011:17:53:49 +0200
;   start since:          63087
;   requests:             12808
;   request duration:     1250261
;   request method:       GET
;   request URI:          /test_mem.php?N=10000
;   content length:       0
;   user:                 -
;   script:               /home/fat/web/docs/php/test_mem.php
;   last request cpu:     0.00
;   last request memory:  0
;
; Note: There is a real-time FPM status monitoring sample web page available
;       It's available in: /usr/local/php-5.3.27/share/php/fpm/status.html
;
; Note: The value must start with a leading slash (/). The value can be
;       anything, but it may not be a good idea to use the .php extension or it
;       may conflict with a real PHP file.
; Default Value: not set
;pm.status_path = /status
 
; The ping URI to call the monitoring page of FPM. If this value is not set, no
; URI will be recognized as a ping page. This could be used to test from outside
; that FPM is alive and responding, or to
; - create a graph of FPM availability (rrd or such);
; - remove a server from a group if it is not responding (load balancing);
; - trigger alerts for the operating team (24/7).
; Note: The value must start with a leading slash (/). The value can be
;       anything, but it may not be a good idea to use the .php extension or it
;       may conflict with a real PHP file.
; Default Value: not set
;ping.path = /ping
 
; This directive may be used to customize the response of a ping request. The
; response is formatted as text/plain with a 200 response code.
; Default Value: pong
;ping.response = pong
 
; The access log file
; Default: not set
;access.log = log/$pool.access.log
 
; The access log format.
; The following syntax is allowed
;  %%: the '%' character
;  %C: %CPU used by the request
;      it can accept the following format:
;      - %{user}C for user CPU only
;      - %{system}C for system CPU only
;      - %{total}C  for user + system CPU (default)
;  %d: time taken to serve the request
;      it can accept the following format:
;      - %{seconds}d (default)
;      - %{miliseconds}d
;      - %{mili}d
;      - %{microseconds}d
;      - %{micro}d
;  %e: an environment variable (same as $_ENV or $_SERVER)
;      it must be associated with embraces to specify the name of the env
;      variable. Some exemples:
;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
;  %f: script filename
;  %l: content-length of the request (for POST request only)
;  %m: request method
;  %M: peak of memory allocated by PHP
;      it can accept the following format:
;      - %{bytes}M (default)
;      - %{kilobytes}M
;      - %{kilo}M
;      - %{megabytes}M
;      - %{mega}M
;  %n: pool name
;  %o: ouput header
;      it must be associated with embraces to specify the name of the header:
;      - %{Content-Type}o
;      - %{X-Powered-By}o
;      - %{Transfert-Encoding}o
;      - ....
;  %p: PID of the child that serviced the request
;  %P: PID of the parent of the child that serviced the request
;  %q: the query string
;  %Q: the '?' character if query string exists
;  %r: the request URI (without the query string, see %q and %Q)
;  %R: remote IP address
;  %s: status (response code)
;  %t: server time the request was received
;      it can accept a strftime(3) format:
;      %d/%b/%Y:%H:%M:%S %z (default)
;  %T: time the log has been written (the request has finished)
;      it can accept a strftime(3) format:
;      %d/%b/%Y:%H:%M:%S %z (default)
;  %u: remote user
;
; Default: "%R - %u %t \"%m %r\" %s"
;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
 
; The log file for slow requests
; Default Value: not set
; Note: slowlog is mandatory if request_slowlog_timeout is set
slowlog = /usr/local/php/logs/$pool.log.slow
 
; The timeout for serving a single request after which a PHP backtrace will be
; dumped to the 'slowlog' file. A value of '0s' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
request_slowlog_timeout = 10
 
; The timeout for serving a single request after which the worker process will
; be killed. This option should be used when the 'max_execution_time' ini option
; does not stop script execution for some reason. A value of '0' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_terminate_timeout = 0
 
; Set open file descriptor rlimit.
; Default Value: system defined value
;rlimit_files = 1024
 
; Set max core size rlimit.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0
 
; Chroot to this directory at the start. This value must be defined as an
; absolute path. When this value is not set, chroot is not used.
; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
; of its subdirectories. If the pool prefix is not set, the global prefix
; will be used instead.
; Note: chrooting is a great security feature and should be used whenever
;       possible. However, all PHP paths will be relative to the chroot
;       (error_log, sessions.save_path, ...).
; Default Value: not set
;chroot = 
 
; Chdir to this directory at the start.
; Note: relative path can be used.
; Default Value: current directory or / when chroot
;chdir = /var/www
 
; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Note: on highloaded environement, this can cause some delay in the page
; process time (several ms).
; Default Value: no
;catch_workers_output = yes
 
; Limits the extensions of the main script FPM will allow to parse. This can
; prevent configuration mistakes on the web server side. You should only limit
; FPM to .php extensions to prevent malicious users to use other extensions to
; exectute php code.
; Note: set an empty value to allow all extensions.
; Default Value: .php
;security.limit_extensions = .php .php3 .php4 .php5
 
; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
; the current environment.
; Default Value: clean env
;env[HOSTNAME] = $HOSTNAME
;env[PATH] = /usr/local/bin:/usr/bin:/bin
;env[TMP] = /tmp
;env[TMPDIR] = /tmp
;env[TEMP] = /tmp
 
; Additional php.ini defines, specific to this pool of workers. These settings
; overwrite the values previously defined in the php.ini. The directives are the
; same as the PHP SAPI:
;   php_value/php_flag             - you can set classic ini defines which can
;                                    be overwritten from PHP call 'ini_set'.
;   php_admin_value/php_admin_flag - these directives won't be overwritten by
;                                     PHP call 'ini_set'
; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
 
; Defining 'extension' will load the corresponding shared extension from
; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
; overwrite previously defined php.ini values, but will append the new value
; instead.
 
; Note: path INI options can be relative and will be expanded with the prefix
; (pool, global or /usr/local/php-5.3.27)
 
; Default Value: nothing is defined by default except the values in php.ini and
;                specified at startup with the -d argument
php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f 6233@qq.com
;php_flag[display_errors] = off
;php_admin_value[error_log] = /var/log/fpm-php.www.log
;php_admin_flag[log_errors] = on
php_admin_value[memory_limit] = 132M
php_admin_value[max_input_time ] = 300
php_admin_value[upload_max_filesize] = 2M
php_admin_value[post_max_size] = 16M
php_admin_value[max_execution_time] = 300

vim /usr/local/php/etc/php-fpm.conf

##启动php-fpm

useradd nginx -M -s /nologin
id nginx
mkdir -p /usr/local/php/logs
/usr/local/php/sbin/php-fpm            -->启动服务
  echo "/usr/local/php/sbin/php-fpm " >>/etc/rc.local
ss -lnput|grep php-fpm                 -->监听本机9000端口

## 查看php启动

php -m

## 设置service启动

1. 编辑 vim /etc/init.d/php

2. 添加权限 chmod 755 /etc/init.d/php

#!/bin/bash
# php Startup script for the php HTTP Server
# it is v.0.0.2 version.
# chkconfig: - 85 15
# description: php is a high-performance web and proxy server.
#              It has a lot of features, but it's not for everyone.
# processname: php
# pidfile: /usr/local/php/logs/php-fpm.pid
# config: /usr/local/php/etc/php-fpm.conf
phpd=/usr/local/php/sbin/php-fpm
php_config=/usr/local/php/etc/php-fpm.conf
php_pid=/usr/local/php/logs/php-fpm.pid
RETVAL=0
prog="php"
# Source function library.
. /etc/rc.d/init.d/functions
# Source networking configuration.
. /etc/sysconfig/network
# Check that networking is up.
[ ${NETWORKING} = "no" ] && exit 0
[ -x $phpd ] || exit 0
# Start php daemons functions.
start() {
if [ -e $php_pid ];then
   echo "php already running...."
   exit 1
fi
   echo -n $"Starting $prog: "
   daemon $phpd -c ${php_config}
   RETVAL=$?
   echo
   [ $RETVAL = 0 ] && touch /var/lock/subsys/php
   return $RETVAL
}
# Stop php daemons functions.
stop() {
        echo -n $"Stopping $prog: "
        killproc $phpd
        RETVAL=$?
        echo
        [ $RETVAL = 0 ] && rm -f /var/lock/subsys/php ${php_pid}
}
# reload php service functions.
reload() {
    echo -n $"Reloading $prog: "
    #kill -HUP `cat ${php_pid}`
    killproc $phpd -HUP
    RETVAL=$?
    echo
}
# See how we were called.
case "$1" in
start)
        start
        ;;
stop)
        stop
        ;;
reload)
        reload
        ;;
restart)
        stop
        start
        ;;
status)
        status $prog
        RETVAL=$?
        ;;
*)
        echo $"Usage: $prog {start|stop|restart|reload|status|help}"
        exit 1
esac
exit $RETVAL

vim /etc/init.d/php

## php的扩展安装

关于gettext的warning问题解决[未安装，需要扩展安装]

cd /opt/tools/php-5.3.27/ext/gettext
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config
make;make install
vim /usr/local/php/lib/php.ini            # 之前的文件已配置，是为zabbix安装做的准备
     extension = "gettext.so"
修改后测试服务：/usr/local/php/sbin/php-fpm -t
停止服务 pkill php-fpm
启动服务 /usr/local/php/sbin/php-fpm

(可以尝试更改文件名称解决)

可选：使用memcache内存软件实现保存会话保持

php实现内存缓存  -->修改配置文件既可  -->需要提前布置好memcache
	sed -n '1461p' /usr/local/php/lib/php.ini
		session.save_handler = files   -->memcache
	sed -n '1490p' /usr/local/php/lib/php.ini
		session.save_path = "/tmp"     -->"tcp:192.168.25.150:11544"

##测试nginx<-->php之间通讯(PHP服务已经开启)
####实际就是配置location,添加端口传递

cat /usr/local/nginx/conf/nginx.conf       -->不需要大的变动(如果使用了include的话)
vim /usr/local/nginx/conf/extra/blog.conf  -->配置端口转发以及root根文件路径
     server {
        listen       88;
        server_name  www.blog.com;
        root   html/blog;
        location / {
            index  index.html index.htm;
        }
        location ~.*\.(php|php5)?$ {
             fastcgi_pass  127.0.0.1:9000;
             fastcgi_index index.php;
             include  fastcgi.conf;
        }
        access_log logs/access_blog.log main;
    }

cd /usr/local/nginx/html/blog
vim phpinfo.php
    <?php
        phpinfo();
    ?>
/usr/local/nginx/sbin/nginx -t
/usr/local/nginx/sbin/nginx -s reload

更改本地hosts文件

C:\Windows\System32\drivers\etc
  192.168.25.144  www.blog.com  blog.com
查看http://www.blog.com:88/phpinfo.php

##测试php<-->mysql之间通讯(Mysql服务已经开启)

ps -ef |grep mysqld
    vim /usr/local/nginx/html/blog/test_php.php
        <?php
            $link_id=mysql_connect('localhost','root','root') or mysql_error();
            if($link_id){
                echo "mysql is Ok ,Congratulation";
            }else{
                echo "Sorry,you can see logs of mysql";
                echo mysql_error();
            }
    ?>

查看http://www.blog.com:88/test_php.php

查看http://www.blog.com:88/error_test.php

ll /usr/local/mysql/lib/|grep libmysqlclient.so.18