1、安装编译工具和库文件,红色部分提示在centos镜像站点上查不到包,用yum安装的时候要认真看那些包没有找到,用yum的时候尽量不要使用-y选项
yum install gcc automake autoconf libtool make gcc-c++ glibc libmcrypt-devel mhash-devel libxslt-devel \
libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel \
zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel \
ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel \
krb5 krb5-devel libidn libidn-devel openssl openssl-devel
 
2、查看PCRE功能的的版本是否安装, PCRE 作用是让 Ngnix 支持 Rewrite 功能。如果提示有版本,则已安装。而没有该命令则没有安装,请yum install -y pcre*
 
pcre-config --version
 
3、获取nginx的安装包,这是1.10.2版本,其他版本请到官网获取地址,或者使用FTP上传
 
源码官网
 
4、解压
 
tar -xvpzf nginx-1.10.2.tar.gz
 
5、添加用户并创建用户组nginx,将nginx用户添加到nginx用户组中,并编译安装nginx.
 
groupadd nginx
useradd nginx -g nginx
passwd nginx
cd nginx-1.10.2
./configure --user=nginx --group=nginx --prefix=/usr/local/nginx --with-http_stub_status_module --with-http_ssl_module --with-http_gzip_static_module 
make
make install
 
nginx直接启动的方法:
/usr/local/sbin/nginx            #启动nginx
[root@ikown sbin]# ./nginx -h
nginx version: nginx/1.10.2
Usage: nginx [-?hvVtTq] [-s signal] [-c filename] [-p prefix] [-g directives]
 
Options:
  -?,-h         : this help
  -v            : show version and exit
  -V            : show version and configure options then exit
  -t            : test configuration and exit
  -T            : test configuration, dump it and exit
  -q            : suppress non-error messages during configuration testing
  -s signal     : send signal to a master process: stop, quit, reopen, reload
  -p prefix     : set prefix path (default: /usr/local/nginx/)
  -c filename   : set configuration file (default: conf/nginx.conf)
  -g directives : set global directives out of configuration file
 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
这上面是安装nginx,在安装php之前,把数据库和nginx安装好。下面是安装php,和整合nginx和数据库的相关步骤
 
6、下载php压缩包,解压
 
官网下载源码
 
7、编译安装php环境,注意php-mcrypt  libmcrypt  libmcrypt-devel mhash-devel 有版权,一般系统yum源没有相关包,请安装第三方源
 
yum install libmcrypt-2.5.8-13.el7.x86_64.rpm libmcrypt-devel-2.5.8-13.el7.x86_64.rpm mhash-0.9.9.9-10.el7.x86_64.rpm mhash-devel-0.9.9.9-10.el7.x86_64.rpm php-mcrypt-5.4.16-7.el7.x86_64.rpm
注意红色文字改相关文件的路径。编译过程1个小时左右,视cpu性能而定。
 
./configure \
--prefix=/usr/local/php7 \
--exec-prefix=/usr/local/php7 \
--bindir=/usr/local/php7/bin \
--sbindir=/usr/local/php7/sbin \
--includedir=/usr/local/php7/include \
--libdir=/usr/local/php7/lib/php \
--mandir=/usr/local/php7/php/man \
--with-config-file-path=/usr/local/php7/etc \
--with-mcrypt=/usr/include \
--with-mhash \
--with-openssl \
--with-zlib \
--enable-zip \
--enable-mysqlnd \
--with-mysqli=shared,mysqlnd \
--with-pdo-mysql=shared,mysqlnd \
--with-gd \
--with-iconv \
--with-zlib \
--enable-zip \
--enable-inline-optimization \
--disable-debug \
--disable-rpath \
--enable-shared \
--enable-xml \
--enable-bcmath \
--enable-shmop \
--enable-sysvsem \
--enable-mbregex \
--enable-mbstring \
--enable-ftp \
--enable-gd-native-ttf \
--enable-pcntl \
--enable-sockets \
--with-xmlrpc \
--enable-soap \
--without-pear \
--with-gettext \
--enable-session \
--with-curl \
--with-jpeg-dir \
--with-freetype-dir \
--enable-opcache \
--enable-fpm \
--without-gdbm \
--disable-fileinfo \
--with-bz2 \
--enable-maintainer-zts \
--with-png-dir \
--enable-ctype

 
make
make install
 
8、 由于需要和MySQL进行通信,所以需要特别查看PHP7安装后的lib扩展库目录(/usr/local/php7/lib/php/extensions/no-debug-zts-20160303/),注意20160303不是唯一的,版本不同会改变,请到extensions下查看。需要确保至少存在 mysqli.sopdo_mysql.so 这两个动态库文件.
 
9、开始设置PHP7的配置文件php.ini、php-fpm.conf、www.conf,可以用编译后的配置文件复制到PHP7的配置目录(/usr/local/php7/etc/)。
 
php-fpm.conf和php.ini   路径为/usr/local/php7/etc/               #php.ini在/etc/php.ini下,需要复制到/usr/local/php7/etc/,并将/etc/php.ini更换名字,如/etc/php.ini.back
www.conf                      路径为/usr/local/php7/etc/php-fpm.d
配置文件
 
[root@ikown etc]# cat php.ini
[PHP]
engine = On
short_open_tag = Off
asp_tags = Off
precision = 14
output_buffering = 4096
zlib.output_compression = Off
implicit_flush = Off
unserialize_callback_func =
serialize_precision = 17
disable_functions =
disable_classes =
zend.enable_gc = On
expose_php = Off
max_execution_time = 30
max_input_time = 60
memory_limit = 128M
error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
display_errors = Off
display_startup_errors = Off
log_errors = On
log_errors_max_len = 1024
ignore_repeated_errors = Off
ignore_repeated_source = Off
report_memleaks = On
track_errors = Off
html_errors = On
variables_order = "GPCS"
request_order = "GP"
register_argc_argv = Off
auto_globals_jit = On
post_max_size = 8M
auto_prepend_file =
auto_append_file =
default_mimetype = "text/html"
doc_root =
user_dir =
extension_dir = "/usr/local/php7/lib/php/extensions/no-debug-zts-20160303/"
enable_dl = Off
file_uploads = On
upload_max_filesize = 20M
max_file_uploads = 20
allow_url_fopen = On
allow_url_include = Off
default_socket_timeout = 60
zend_extension=opcache.so
extension=mysqli.so
extension=pdo_mysql.so
[CLI Server]
cli_server.color = On
[Date]
date.timezone = PRC
[filter]
[iconv]
[intl]
[sqlite]
[sqlite3]
[Pcre]
[Pdo]
[Pdo_mysql]
pdo_mysql.cache_size = 2000
pdo_mysql.default_socket=
[Phar]
[mail function]
SMTP = localhost
smtp_port = 25
sendmail_path = /usr/sbin/sendmail -t -i
mail.add_x_header = On
[SQL]
sql.safe_mode = Off
[ODBC]
odbc.allow_persistent = On
odbc.check_persistent = On
odbc.max_persistent = -1
odbc.max_links = -1
odbc.defaultlrl = 4096
odbc.defaultbinmode = 1
[Interbase]
ibase.allow_persistent = 1
ibase.max_persistent = -1
ibase.max_links = -1
ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
ibase.dateformat = "%Y-%m-%d"
ibase.timeformat = "%H:%M:%S"
[MySQL]
mysql.allow_local_infile = On
mysql.allow_persistent = On
mysql.cache_size = 2000
mysql.max_persistent = -1
mysql.max_links = -1
mysql.default_port =
mysql.default_socket = /usr/local/mysql/mysql.sock
mysql.default_host =
mysql.default_user =
mysql.default_password =
mysql.connect_timeout = 60
mysql.trace_mode = Off
[MySQLi]
mysqli.max_persistent = -1
mysqli.allow_persistent = On
mysqli.max_links = -1
mysqli.cache_size = 2000
mysqli.default_port = 3306
mysqli.default_socket = /usr/local/mysql/mysql.sock
mysqli.default_host =
mysqli.default_user =
mysqli.default_pw =
mysqli.reconnect = Off
[mysqlnd]
mysqlnd.collect_statistics = On
mysqlnd.collect_memory_statistics = Off
[OCI8]
[PostgreSQL]
pgsql.allow_persistent = On
pgsql.auto_reset_persistent = Off
pgsql.max_persistent = -1
pgsql.max_links = -1
pgsql.ignore_notice = 0
pgsql.log_notice = 0
[Sybase-CT]
sybct.allow_persistent = On
sybct.max_persistent = -1
sybct.max_links = -1
sybct.min_server_severity = 10
sybct.min_client_severity = 10
[bcmath]
bcmath.scale = 0
[browscap]
[Session]
session.save_handler = files
session.use_cookies = 1
session.use_only_cookies = 1
session.name = PHPSESSID
session.auto_start = 0
session.cookie_lifetime = 0
session.cookie_path = /
session.cookie_domain =
session.cookie_httponly =
session.serialize_handler = php
session.gc_probability = 1
session.gc_divisor = 1000
session.gc_maxlifetime = 1440
session.bug_compat_42 = Off
session.bug_compat_warn = Off
session.referer_check =
session.cache_limiter = nocache
session.cache_expire = 180
session.use_trans_sid = 0
session.hash_function = 0
session.hash_bits_per_character = 5
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
[MSSQL]
mssql.allow_persistent = On
mssql.max_persistent = -1
mssql.max_links = -1
mssql.min_error_severity = 10
mssql.min_message_severity = 10
mssql.compatability_mode = Off
mssql.secure_connection = Off
[Assertion]
[mbstring]
[gd]
[opcache]
; Determines if Zend OPCache is enabled
opcache.enable=1
[exif]
[Tidy]
tidy.clean_output = Off
[soap]
soap.wsdl_cache_enabled=1
soap.wsdl_cache_dir="/tmp"
soap.wsdl_cache_ttl=86400
soap.wsdl_cache_limit = 5
[sysvshm]
[ldap]
ldap.max_links = -1
[mcrypt]
[dba]
 
 
[root@ikown etc]# cat php-fpm.conf
[global]
include=/usr/local/php7/etc/php-fpm.d/*.conf
 
 
 
[root@ikown php-fpm.d]# cat www.conf
[www]
user = nginx
group = nginx
listen = 127.0.0.1:9000
pm = dynamic
pm.max_children = 5
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 3
php_value[session.save_handler] = files
php_value[session.save_path] = /usr/local/php7/session
slowlog = /usr/local/php7/var/log/$pool-slow.log
request_slowlog_timeout = 10s
www.conf红色部分必须是存在的目录,且用户属于nginx和nginx组,说有的配置文件都属于程序所在的用户,比如my.cnf属于mysql用户和mysql用户组。
 
 
[root@ikown conf]# cat nginx.conf | grep -v -E '^$|#'
worker_processes  1;
events {
    worker_connections  1024;
}
http {
    include       mime.types;
    default_type  application/octet-stream;
    sendfile        on;
    client_max_body_size 20m;
    keepalive_timeout  65;
    server {
        listen       80;
        server_name  localhost;
        location / {
            root   html;
            index  index.html index.htm index.php;
        }
        error_page   500 502 503 504  /50x.html;
        location = /50x.html {
            root   html;
        }
        location ~ \.php$ {
            root           html;
            fastcgi_pass   127.0.0.1:9000;
            fastcgi_index  index.php;
            fastcgi_param  SCRIPT_FILENAME  $document_root$fastcgi_script_name;
            include        fastcgi_params;
        }
 
    }
}
nginx.conf以下代码是新加的
location ~ \.php$ {
            root           html;
            fastcgi_pass   127.0.0.1:9000;
            fastcgi_index  index.php;
            fastcgi_param  SCRIPT_FILENAME  $document_root$fastcgi_script_name;
            include        fastcgi_params;
        }
 
 
10、测试配置文件是否正确
 
php-fpm -t
NOTICE: configuration file /usr/local/php7/etc/php-fpm.conf test is successful
 
11、启动php服务
在完成上面的操作后,就可以正式使用php服务了。启动php进程服务的命令如下:
 
/usr/local/php7/etc/php-fpm
 
12、测试nginx是否支持php ,在html文件夹里写一个index.php文件,内容如下,再通过浏览器访问这个文件,就可以看到php的参数。
 
<?php
     Phpinfo();
?>
 
 
附录:
 
[root@cloud nginx-1.10.2]# ./configure --help
 
  --help                             print this message
 
  --prefix=PATH                      set installation prefix
  --sbin-path=PATH                   set nginx binary pathname
  --modules-path=PATH                set modules path
  --conf-path=PATH                   set nginx.conf pathname
  --error-log-path=PATH              set error log pathname
  --pid-path=PATH                    set nginx.pid pathname
  --lock-path=PATH                   set nginx.lock pathname
 
  --user=USER                        set non-privileged user for
                                     worker processes
  --group=GROUP                      set non-privileged group for
                                     worker processes
 
  --build=NAME                       set build name
  --builddir=DIR                     set build directory
 
  --with-select_module               enable select module
  --without-select_module            disable select module
  --with-poll_module                 enable poll module
  --without-poll_module              disable poll module
 
  --with-threads                     enable thread pool support
 
  --with-file-aio                    enable file AIO support
  --with-ipv6                        enable IPv6 support
 
  --with-http_ssl_module             enable ngx_http_ssl_module
  --with-http_v2_module              enable ngx_http_v2_module
  --with-http_realip_module          enable ngx_http_realip_module
  --with-http_addition_module        enable ngx_http_addition_module
  --with-http_xslt_module            enable ngx_http_xslt_module
  --with-http_xslt_module=dynamic    enable dynamic ngx_http_xslt_module
  --with-http_image_filter_module    enable ngx_http_image_filter_module
  --with-http_image_filter_module=dynamic
                                     enable dynamic ngx_http_image_filter_module
  --with-http_geoip_module           enable ngx_http_geoip_module
  --with-http_geoip_module=dynamic   enable dynamic ngx_http_geoip_module
  --with-http_sub_module             enable ngx_http_sub_module
  --with-http_dav_module             enable ngx_http_dav_module
  --with-http_flv_module             enable ngx_http_flv_module
  --with-http_mp4_module             enable ngx_http_mp4_module
  --with-http_gunzip_module          enable ngx_http_gunzip_module
  --with-http_gzip_static_module     enable ngx_http_gzip_static_module
  --with-http_auth_request_module    enable ngx_http_auth_request_module
  --with-http_random_index_module    enable ngx_http_random_index_module
  --with-http_secure_link_module     enable ngx_http_secure_link_module
  --with-http_degradation_module     enable ngx_http_degradation_module
  --with-http_slice_module           enable ngx_http_slice_module
  --with-http_stub_status_module     enable ngx_http_stub_status_module
 
  --without-http_charset_module      disable ngx_http_charset_module
  --without-http_gzip_module         disable ngx_http_gzip_module
  --without-http_ssi_module          disable ngx_http_ssi_module
  --without-http_userid_module       disable ngx_http_userid_module
  --without-http_access_module       disable ngx_http_access_module
  --without-http_auth_basic_module   disable ngx_http_auth_basic_module
  --without-http_autoindex_module    disable ngx_http_autoindex_module
  --without-http_geo_module          disable ngx_http_geo_module
  --without-http_map_module          disable ngx_http_map_module
  --without-http_split_clients_module disable ngx_http_split_clients_module
  --without-http_referer_module      disable ngx_http_referer_module
  --without-http_rewrite_module      disable ngx_http_rewrite_module
  --without-http_proxy_module        disable ngx_http_proxy_module
  --without-http_fastcgi_module      disable ngx_http_fastcgi_module
  --without-http_uwsgi_module        disable ngx_http_uwsgi_module
  --without-http_scgi_module         disable ngx_http_scgi_module
  --without-http_memcached_module    disable ngx_http_memcached_module
  --without-http_limit_conn_module   disable ngx_http_limit_conn_module
  --without-http_limit_req_module    disable ngx_http_limit_req_module
  --without-http_empty_gif_module    disable ngx_http_empty_gif_module
  --without-http_browser_module      disable ngx_http_browser_module
  --without-http_upstream_hash_module
                                     disable ngx_http_upstream_hash_module
  --without-http_upstream_ip_hash_module
                                     disable ngx_http_upstream_ip_hash_module
  --without-http_upstream_least_conn_module
                                     disable ngx_http_upstream_least_conn_module
  --without-http_upstream_keepalive_module
                                     disable ngx_http_upstream_keepalive_module
  --without-http_upstream_zone_module
                                     disable ngx_http_upstream_zone_module
 
  --with-http_perl_module            enable ngx_http_perl_module
  --with-http_perl_module=dynamic    enable dynamic ngx_http_perl_module
  --with-perl_modules_path=PATH      set Perl modules path
  --with-perl=PATH                   set perl binary pathname
 
  --http-log-path=PATH               set http access log pathname
  --http-client-body-temp-path=PATH  set path to store
                                     http client request body temporary files
  --http-proxy-temp-path=PATH        set path to store
                                     http proxy temporary files
  --http-fastcgi-temp-path=PATH      set path to store
                                     http fastcgi temporary files
  --http-uwsgi-temp-path=PATH        set path to store
                                     http uwsgi temporary files
  --http-scgi-temp-path=PATH         set path to store
                                     http scgi temporary files
 
  --without-http                     disable HTTP server
  --without-http-cache               disable HTTP cache
 
  --with-mail                        enable POP3/IMAP4/SMTP proxy module
  --with-mail=dynamic                enable dynamic POP3/IMAP4/SMTP proxy module
  --with-mail_ssl_module             enable ngx_mail_ssl_module
  --without-mail_pop3_module         disable ngx_mail_pop3_module
  --without-mail_imap_module         disable ngx_mail_imap_module
  --without-mail_smtp_module         disable ngx_mail_smtp_module
 
  --with-stream                      enable TCP/UDP proxy module
  --with-stream=dynamic              enable dynamic TCP/UDP proxy module
  --with-stream_ssl_module           enable ngx_stream_ssl_module
  --without-stream_limit_conn_module disable ngx_stream_limit_conn_module
  --without-stream_access_module     disable ngx_stream_access_module
  --without-stream_upstream_hash_module
                                     disable ngx_stream_upstream_hash_module
  --without-stream_upstream_least_conn_module
                                     disable ngx_stream_upstream_least_conn_module
  --without-stream_upstream_zone_module
                                     disable ngx_stream_upstream_zone_module
 
  --with-google_perftools_module     enable ngx_google_perftools_module
  --with-cpp_test_module             enable ngx_cpp_test_module
 
  --add-module=PATH                  enable external module
  --add-dynamic-module=PATH          enable dynamic external module
 
  --with-cc=PATH                     set C compiler pathname
  --with-cpp=PATH                    set C preprocessor pathname
  --with-cc-opt=OPTIONS              set additional C compiler options
  --with-ld-opt=OPTIONS              set additional linker options
  --with-cpu-opt=CPU                 build for the specified CPU, valid values:
                                     pentium, pentiumpro, pentium3, pentium4,
                                     athlon, opteron, sparc32, sparc64, ppc64
 
  --without-pcre                     disable PCRE library usage
  --with-pcre                        force PCRE library usage
  --with-pcre=DIR                    set path to PCRE library sources
  --with-pcre-opt=OPTIONS            set additional build options for PCRE
  --with-pcre-jit                    build PCRE with JIT compilation support
 
  --with-md5=DIR                     set path to md5 library sources
  --with-md5-opt=OPTIONS             set additional build options for md5
  --with-md5-asm                     use md5 assembler sources
 
  --with-sha1=DIR                    set path to sha1 library sources
  --with-sha1-opt=OPTIONS            set additional build options for sha1
  --with-sha1-asm                    use sha1 assembler sources
 
  --with-zlib=DIR                    set path to zlib library sources
  --with-zlib-opt=OPTIONS            set additional build options for zlib
  --with-zlib-asm=CPU                use zlib assembler sources optimized
                                     for the specified CPU, valid values:
                                     pentium, pentiumpro
 
  --with-libatomic                   force libatomic_ops library usage
  --with-libatomic=DIR               set path to libatomic_ops library sources
 
  --with-openssl=DIR                 set path to OpenSSL library sources
  --with-openssl-opt=OPTIONS         set additional build options for OpenSSL
 
  --with-debug                       enable debug logging
 
[root@cloud php-7.1.0]# ./configure --help
`configure' configures this package to adapt to many kinds of systems.
 
Usage: ./configure [OPTION]... [VAR=VALUE]...
 
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.
 
Defaults for the options are specified in brackets.
 
Configuration:
  -h, --help              display this help and exit
      --help=short        display options specific to this package
      --help=recursive    display the short help of all the included packages
  -V, --version           display version information and exit
  -q, --quiet, --silent   do not print `checking ...' messages
      --cache-file=FILE   cache test results in FILE [disabled]
  -C, --config-cache      alias for `--cache-file=config.cache'
  -n, --no-create         do not create output files
      --srcdir=DIR        find the sources in DIR [configure dir or `..']
 
Installation directories:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [/usr/local]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [PREFIX]
 
By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc.  You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.
 
For better control, use the options below.
 
Fine tuning of the installation directories:
  --bindir=DIR            user executables [EPREFIX/bin]
  --sbindir=DIR           system admin executables [EPREFIX/sbin]
  --libexecdir=DIR        program executables [EPREFIX/libexec]
  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
  --libdir=DIR            object code libraries [EPREFIX/lib]
  --includedir=DIR        C header files [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
  --infodir=DIR           info documentation [DATAROOTDIR/info]
  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
  --mandir=DIR            man documentation [DATAROOTDIR/man]
  --docdir=DIR            documentation root [DATAROOTDIR/doc/PACKAGE]
  --htmldir=DIR           html documentation [DOCDIR]
  --dvidir=DIR            dvi documentation [DOCDIR]
  --pdfdir=DIR            pdf documentation [DOCDIR]
  --psdir=DIR             ps documentation [DOCDIR]
 
System types:
  --build=BUILD     configure for building on BUILD [guessed]
  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
  --target=TARGET   configure for building compilers for TARGET [HOST]
 
Optional Features and Packages:
  --disable-option-checking  ignore unrecognized --enable/--with options
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-libdir=NAME      Look for libraries in .../NAME rather than .../lib
  --disable-rpath         Disable passing additional runtime library
                          search paths
  --enable-re2c-cgoto     Enable -g flag to re2c to use computed goto gcc extension
  --disable-gcc-global-regs
                          whether to enable GCC global register variables
 
SAPI modules:
 
  --with-apxs2=FILE       Build shared Apache 2.0 Handler module. FILE is the optional
                          pathname to the Apache apxs tool apxs
  --disable-cli           Disable building CLI version of PHP
                          (this forces --without-pear)
  --enable-embed=TYPE     EXPERIMENTAL: Enable building of embedded SAPI library
                          TYPE is either 'shared' or 'static'. TYPE=shared
  --enable-fpm            Enable building of the fpm SAPI executable
  --with-fpm-user=USER    Set the user for php-fpm to run as. (default: nobody)
  --with-fpm-group=GRP    Set the group for php-fpm to run as. For a system user, this
                          should usually be set to match the fpm username (default: nobody)
  --with-fpm-systemd      Activate systemd integration
  --with-fpm-acl          Use POSIX Access Control Lists
  --with-litespeed        Build PHP as litespeed module
  --enable-phpdbg            Build phpdbg
  --enable-phpdbg-webhelper  Build phpdbg web SAPI support
  --enable-phpdbg-debug      Build phpdbg in debug mode
  --disable-cgi           Disable building CGI version of PHP
 
General settings:
 
  --enable-gcov           Enable GCOV code coverage (requires LTP) - FOR DEVELOPERS ONLY!!
  --enable-debug          Compile with debugging symbols
  --with-layout=TYPE      Set how installed files will be laid out.  Type can
                          be either PHP or GNU [PHP]
  --with-config-file-path=PATH
                          Set the path in which to look for php.ini [PREFIX/lib]
  --with-config-file-scan-dir=PATH
                          Set the path where to scan for configuration files
  --enable-sigchild       Enable PHP's own SIGCHLD handler
  --enable-libgcc         Enable explicitly linking against libgcc
  --disable-short-tags    Disable the short-form <? start tag by default
  --enable-dmalloc        Enable dmalloc
  --disable-ipv6          Disable IPv6 support
  --enable-dtrace         Enable DTrace support
  --enable-fd-setsize     Set size of descriptor sets
 
Extensions:
 
  --with-EXTENSION=shared[,PATH]
 
    NOTE: Not all extensions can be build as 'shared'.
 
    Example: --with-foobar=shared,/usr/local/foobar/
 
      o Builds the foobar extension as shared extension.
      o foobar package install prefix is /usr/local/foobar/
 
 
  --disable-all           Disable all extensions which are enabled by default
 
  --disable-libxml        Disable LIBXML support
  --with-libxml-dir=DIR   LIBXML: libxml2 install prefix
  --with-openssl=DIR      Include OpenSSL support (requires OpenSSL >= 1.0.1)
  --with-kerberos=DIR     OPENSSL: Include Kerberos support
  --with-system-ciphers   OPENSSL: Use system default cipher list instead of hardcoded value
  --with-pcre-regex=DIR   Include Perl Compatible Regular Expressions support.
                          DIR is the PCRE install prefix BUNDLED
  --with-pcre-jit         Enable PCRE JIT functionality
  --without-sqlite3=DIR   Do not include SQLite3 support. DIR is the prefix to
                          SQLite3 installation directory.
  --with-zlib=DIR         Include ZLIB support (requires zlib >= 1.0.9)
  --with-zlib-dir=<DIR>   Define the location of zlib install directory
  --enable-bcmath         Enable bc style precision math functions
  --with-bz2=DIR          Include BZip2 support
  --enable-calendar       Enable support for calendar conversion
  --disable-ctype         Disable ctype functions
  --with-curl=DIR         Include cURL support
  --enable-dba            Build DBA with bundled modules. To build shared DBA
                          extension use --enable-dba=shared
  --with-qdbm=DIR         DBA: QDBM support
  --with-gdbm=DIR         DBA: GDBM support
  --with-ndbm=DIR         DBA: NDBM support
  --with-db4=DIR          DBA: Oracle Berkeley DB 4.x or 5.x support
  --with-db3=DIR          DBA: Oracle Berkeley DB 3.x support
  --with-db2=DIR          DBA: Oracle Berkeley DB 2.x support
  --with-db1=DIR          DBA: Oracle Berkeley DB 1.x support/emulation
  --with-dbm=DIR          DBA: DBM support
  --with-tcadb=DIR        DBA: Tokyo Cabinet abstract DB support
  --without-cdb=DIR       DBA: CDB support (bundled)
  --disable-inifile       DBA: INI support (bundled)
  --disable-flatfile      DBA: FlatFile support (bundled)
  --disable-dom           Disable DOM support
  --with-libxml-dir=DIR   DOM: libxml2 install prefix
  --with-enchant=DIR      Include enchant support.
                          GNU Aspell version 1.1.3 or higher required.
  --enable-exif           Enable EXIF (metadata from images) support
  --disable-fileinfo      Disable fileinfo support
  --disable-filter        Disable input filter support
  --with-pcre-dir         FILTER: pcre install prefix
  --enable-ftp            Enable FTP support
  --with-openssl-dir=DIR  FTP: openssl install prefix
  --with-gd=DIR           Include GD support.  DIR is the GD library base
                          install directory BUNDLED
  --with-webp-dir=DIR      GD: Set the path to libwebp install prefix
  --with-jpeg-dir=DIR     GD: Set the path to libjpeg install prefix
  --with-png-dir=DIR      GD: Set the path to libpng install prefix
  --with-zlib-dir=DIR     GD: Set the path to libz install prefix
  --with-xpm-dir=DIR      GD: Set the path to libXpm install prefix
  --with-freetype-dir=DIR GD: Set the path to FreeType 2 install prefix
  --enable-gd-native-ttf  GD: Enable TrueType string function
  --enable-gd-jis-conv    GD: Enable JIS-mapped Japanese font support
  --with-gettext=DIR      Include GNU gettext support
  --with-gmp=DIR          Include GNU MP support
  --with-mhash=DIR        Include mhash support
  --disable-hash          Disable hash support
  --without-iconv=DIR     Exclude iconv support
  --with-imap=DIR         Include IMAP support. DIR is the c-client install prefix
  --with-kerberos=DIR     IMAP: Include Kerberos support. DIR is the Kerberos install prefix
  --with-imap-ssl=DIR     IMAP: Include SSL support. DIR is the OpenSSL install prefix
  --with-interbase=DIR    Include Firebird support.  DIR is the Firebird base
                          install directory /opt/firebird
  --enable-intl           Enable internationalization support
  --with-icu-dir=DIR      Specify where ICU libraries and headers can be found
  --disable-json          Disable JavaScript Object Serialization support
  --with-ldap=DIR         Include LDAP support
  --with-ldap-sasl=DIR    LDAP: Include Cyrus SASL support
  --enable-mbstring       Enable multibyte string support
  --disable-mbregex       MBSTRING: Disable multibyte regex support
  --disable-mbregex-backtrack
                          MBSTRING: Disable multibyte regex backtrack check
  --with-libmbfl=DIR      MBSTRING: Use external libmbfl.  DIR is the libmbfl base
                          install directory BUNDLED
  --with-onig=DIR         MBSTRING: Use external oniguruma. DIR is the oniguruma install prefix.
                          If DIR is not set, the bundled oniguruma will be used
  --with-mcrypt=DIR       Include mcrypt support
  --with-mysqli=FILE      Include MySQLi support.  FILE is the path
                          to mysql_config.  If no value or mysqlnd is passed
                          as FILE, the MySQL native driver will be used
  --enable-embedded-mysqli
                          MYSQLi: Enable embedded support
                          Note: Does not work with MySQL native driver!
  --with-mysql-sock=SOCKPATH
                          MySQLi/PDO_MYSQL: Location of the MySQL unix socket pointer.
                          If unspecified, the default locations are searched
  --with-oci8=DIR         Include Oracle Database OCI8 support. DIR defaults to $ORACLE_HOME.
                          Use --with-oci8=instantclient,/path/to/instant/client/lib
                          to use an Oracle Instant Client installation
  --with-odbcver=HEX      Force support for the passed ODBC version. A hex number is expected, default 0x0350.
                             Use the special value of 0 to prevent an explicit ODBCVER to be defined.
  --with-adabas=DIR       Include Adabas D support /usr/local
  --with-sapdb=DIR        Include SAP DB support /usr/local
  --with-solid=DIR        Include Solid support /usr/local/solid
  --with-ibm-db2=DIR      Include IBM DB2 support /home/db2inst1/sqllib
  --with-ODBCRouter=DIR   Include ODBCRouter.com support /usr
  --with-empress=DIR      Include Empress support \$EMPRESSPATH
                          (Empress Version >= 8.60 required)
  --with-empress-bcs=DIR
                          Include Empress Local Access support \$EMPRESSPATH
                          (Empress Version >= 8.60 required)
  --with-birdstep=DIR     Include Birdstep support /usr/local/birdstep
  --with-custom-odbc=DIR  Include user defined ODBC support. DIR is ODBC install base
                          directory /usr/local. Make sure to define CUSTOM_ODBC_LIBS and
                          have some odbc.h in your include dirs. f.e. you should define
                          following for Sybase SQL Anywhere 5.5.00 on QNX, prior to
                          running this configure script:
                            CPPFLAGS=\"-DODBC_QNX -DSQLANY_BUG\"
                            LDFLAGS=-lunix
                            CUSTOM_ODBC_LIBS=\"-ldblib -lodbc\"
  --with-iodbc=DIR        Include iODBC support /usr/local
  --with-esoob=DIR        Include Easysoft OOB support /usr/local/easysoft/oob/client
  --with-unixODBC=DIR     Include unixODBC support /usr/local
  --with-dbmaker=DIR      Include DBMaker support
  --disable-opcache       Disable Zend OPcache support
  --disable-opcache-file  Disable file based caching
  --disable-huge-code-pages
                          Disable copying PHP CODE pages into HUGE PAGES
  --enable-pcntl          Enable pcntl support (CLI/CGI only)
  --disable-pdo           Disable PHP Data Objects support
  --with-pdo-dblib=DIR    PDO: DBLIB-DB support.  DIR is the FreeTDS home directory
  --with-pdo-firebird=DIR PDO: Firebird support.  DIR is the Firebird base
                          install directory /opt/firebird
  --with-pdo-mysql=DIR    PDO: MySQL support. DIR is the MySQL base directory
                          If no value or mysqlnd is passed as DIR, the
                          MySQL native driver will be used
  --with-zlib-dir=DIR     PDO_MySQL: Set the path to libz install prefix
  --with-pdo-oci=DIR      PDO: Oracle OCI support. DIR defaults to \$ORACLE_HOME.
                          Use --with-pdo-oci=instantclient,prefix,version
                          for an Oracle Instant Client SDK.
                          For example on Linux with 11.2 RPMs use:
                            --with-pdo-oci=instantclient,/usr,11.2
                          With 10.2 RPMs use:
                            --with-pdo-oci=instantclient,/usr,10.2.0.4
  --with-pdo-odbc=flavour,dir
                          PDO: Support for 'flavour' ODBC driver.
                          include and lib dirs are looked for under 'dir'.
 
                          'flavour' can be one of:  ibm-db2, iODBC, unixODBC, generic
                          If ',dir' part is omitted, default for the flavour
                          you have selected will be used. e.g.:
 
                            --with-pdo-odbc=unixODBC
 
                          will check for unixODBC under /usr/local. You may attempt
                          to use an otherwise unsupported driver using the \"generic\"
                          flavour.  The syntax for generic ODBC support is:
 
                            --with-pdo-odbc=generic,dir,libname,ldflags,cflags
 
                          When built as 'shared' the extension filename is always pdo_odbc.so
  --with-pdo-pgsql=DIR    PDO: PostgreSQL support.  DIR is the PostgreSQL base
                          install directory or the path to pg_config
  --without-pdo-sqlite=DIR
                          PDO: sqlite 3 support.  DIR is the sqlite base
                          install directory BUNDLED
  --with-pgsql=DIR        Include PostgreSQL support.  DIR is the PostgreSQL
                          base install directory or the path to pg_config
  --disable-phar          Disable phar support
  --disable-posix         Disable POSIX-like functions
  --with-pspell=DIR       Include PSPELL support.
                          GNU Aspell version 0.50.0 or higher required
  --with-libedit=DIR      Include libedit readline replacement (CLI/CGI only)
  --with-readline=DIR     Include readline support (CLI/CGI only)
  --with-recode=DIR       Include recode support
  --disable-session       Disable session support
  --with-mm=DIR           SESSION: Include mm support for session storage
  --enable-shmop          Enable shmop support
  --disable-simplexml     Disable SimpleXML support
  --with-libxml-dir=DIR   SimpleXML: libxml2 install prefix
  --with-snmp=DIR         Include SNMP support
  --with-openssl-dir=DIR  SNMP: openssl install prefix
  --enable-soap           Enable SOAP support
  --with-libxml-dir=DIR   SOAP: libxml2 install prefix
  --enable-sockets        Enable sockets support
  --enable-sysvmsg        Enable sysvmsg support
  --enable-sysvsem        Enable System V semaphore support
  --enable-sysvshm        Enable the System V shared memory support
  --with-tidy=DIR         Include TIDY support
  --disable-tokenizer     Disable tokenizer support
  --enable-wddx           Enable WDDX support
  --with-libxml-dir=DIR   WDDX: libxml2 install prefix
  --with-libexpat-dir=DIR WDDX: libexpat dir for XMLRPC-EPI (deprecated)
  --disable-xml           Disable XML support
  --with-libxml-dir=DIR   XML: libxml2 install prefix
  --with-libexpat-dir=DIR XML: libexpat install prefix (deprecated)
  --disable-xmlreader     Disable XMLReader support
  --with-libxml-dir=DIR   XMLReader: libxml2 install prefix
  --with-xmlrpc=DIR       Include XMLRPC-EPI support
  --with-libxml-dir=DIR   XMLRPC-EPI: libxml2 install prefix
  --with-libexpat-dir=DIR XMLRPC-EPI: libexpat dir for XMLRPC-EPI (deprecated)
  --with-iconv-dir=DIR    XMLRPC-EPI: iconv dir for XMLRPC-EPI
  --disable-xmlwriter     Disable XMLWriter support
  --with-libxml-dir=DIR   XMLWriter: libxml2 install prefix
  --with-xsl=DIR          Include XSL support.  DIR is the libxslt base
                          install directory (libxslt >= 1.1.0 required)
  --enable-zip            Include Zip read/write support
  --with-zlib-dir=DIR     ZIP: Set the path to libz install prefix
  --with-pcre-dir         ZIP: pcre install prefix
  --with-libzip=DIR       ZIP: use libzip
  --enable-mysqlnd        Enable mysqlnd explicitly, will be done implicitly
                          when required by other extensions
  --disable-mysqlnd-compression-support
                          Disable support for the MySQL compressed protocol in mysqlnd
  --with-zlib-dir=DIR     mysqlnd: Set the path to libz install prefix
 
PEAR:
 
  --with-pear=DIR         Install PEAR in DIR [PREFIX/lib/php]
  --without-pear          Do not install PEAR
 
Zend:
 
  --enable-maintainer-zts Enable thread safety - for code maintainers only!!
  --disable-inline-optimization
                          If building zend_execute.lo fails, try this switch
  --disable-zend-signals  whether to enable zend signal handling
 
TSRM:
 
  --with-tsrm-pth=pth-config
                          Use GNU Pth
  --with-tsrm-st          Use SGI's State Threads
  --with-tsrm-pthreads    Use POSIX threads (default)
 
Libtool:
 
  --enable-shared=PKGS    Build shared libraries default=yes
  --enable-static=PKGS    Build static libraries default=yes
  --enable-fast-install=PKGS
                          Optimize for fast installation default=yes
  --with-gnu-ld           Assume the C compiler uses GNU ld default=no
  --disable-libtool-lock  Avoid locking (might break parallel builds)
  --with-pic              Try to use only PIC/non-PIC objects default=use both
  --with-tags=TAGS        Include additional configurations automatic
 
 
Some influential environment variables:
  CC          C compiler command
  CFLAGS      C compiler flags
  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
              nonstandard directory <lib dir>
  LIBS        libraries to pass to the linker, e.g. -l<library>
  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
              you have headers in a nonstandard directory <include dir>
  CPP         C preprocessor
  YACC        The `Yet Another Compiler Compiler' implementation to use.
              Defaults to the first program found out of: `bison -y', `byacc',
              `yacc'.
  YFLAGS      The list of arguments that will be passed by default to $YACC.
              This script will default YFLAGS to the empty string to avoid a
              default value of `-d' given by some make applications.
  CXX         C++ compiler command
  CXXFLAGS    C++ compiler flags
  CXXCPP      C++ preprocessor
 
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
 

Nginx 1.10.2 php 7 环境安装的更多相关文章

  1. CentOS6.5下安装JDK1.7+MYSQL5.5+TOMCAT7+nginx1.7.5环境安装文档

    ----------------CentOS6.5下安装JDK1.7+MYSQL5.5+TOMCAT7+nginx1.7.5环境安装文档----------------------- [JDK1.7安 ...

  2. Nginx+Python+uwsgi+Django的web开发环境安装及配置

    Nginx+Python+uwsgi+Django的web开发环境安装及配置 nginx安装 nginx的安装这里就略过了... python安装 通常系统已经自带了,这里也略过 uwsgi安装 官网 ...

  3. Linux 环境安装 Node、nginx、docker、vsftpd、gitlab

    Linux 环境安装 centos7 # 更新yum yum update -y 0. 防火墙 firewalld 新入的JD云服务器,发现防火墙默认是关闭的. # 查看防火墙状态 systemctl ...

  4. legend3---Windows 7/8/10 系统下Laravel框架的开发环境安装及部署详解(Vagrant + Homestead)

    legend3---Windows 7/8/10 系统下Laravel框架的开发环境安装及部署详解(Vagrant + Homestead) 一.总结 一句话总结: 1.安装的话就是下载好git,va ...

  5. Ubuntu 16.04 LTS 安装配置 Nginx 1.10.0 Php7.0-FPM

    1. 安装Nginx,Php-7.0 ~$ sudo add-apt-repository ppa:nginx/stable ~$ sudo apt-get update ~$ sudo apt-ge ...

  6. Windows 10环境安装VIM代码补全插件YouCompleteMe

    Windows 10环境安装VIM代码补全插件YouCompleteMe 折腾一周也没搞定Windows下安装VIM代码补全插件YouCompleteMe,今天在家折腾一天总算搞定了.关键问题是在于P ...

  7. Ubuntu 16.04源码编译安装nginx 1.10.0

    一.下载相关的依赖库 pcre 下载地址 http://120.52.73.43/jaist.dl.sourceforge.net/project/pcre/pcre/8.38/pcre-8.38.t ...

  8. llinux 环境安装编译 nginx (源码安装包)

    简介: Nginx是一款轻量级的Web 服务器/反向代理服务器及电子邮件(IMAP/POP3)代理服务器,并在一个BSD-like 协议下发行.由俄罗斯的程序设计师Igor Sysoev所开发,供俄国 ...

  9. windows平台下nginx+PHP环境安装

    因为日常工作在windows下,为方便在window是下进行PHP开发,需要在windows平台下搭建PHP开发环境,web服务器选择nginx,不过windows版本的nginx性能要比Linux/ ...

随机推荐

  1. class-dump + DumpFrameworks.pl

    目的:实现生成 private framework 的 .h,以便倒入项目使用私有 api. 一.class-dump 下载地址: http://stevenygard.com/download/ 安 ...

  2. ng-repeat 嵌套 ng-switch 出错解决

    Error: $compile:ctreq Missing Required Controller Controller 'ngSwitch', required by directive 'ngSw ...

  3. center的用法

    (1)先 frame ,决定大小,也就是宽.高 (2)再center,决定位置, 需要注意的是,不能直接写center,需要通过CGPointMake(x,y)赋值

  4. LeetCode Kth Largest Element in an Array

    原题链接在这里:https://leetcode.com/problems/kth-largest-element-in-an-array/ 题目: Find the kth largest elem ...

  5. zabbix的一些优化参数随笔

    StartDBSyncers=12  如果proxy过多 可以适当加大这个参数 ProxyConfigFrequency=60ProxyDataFrequency=60 这两个参数很重要,一个是ser ...

  6. SQL Server 2008 修改安装路径后安装出错的解决方法

    1.安装时如果修改安装路径后报错 例如想把“C:\Program Files\Microsoft SQL Server” 修改为“D:\Program Files\Microsoft SQL Serv ...

  7. windows2003服务器mysql每天定时备份

    1.php利用mysqldump备份数据库,代码如下: <?php /** * 数据库备份 */ $sqlname = $argv[1]; //接受bat或cmd传过来的第一个参数 要备份的数据 ...

  8. 一种构造WEB服务器端recv和send接口阻塞现象的方法

    send阻塞 socket recv send接口阻塞,会导致服务器端不在响应客户端任何请求,所以一般情况, 会将socket设置为非阻塞状态, 但是有些场景,例如ssl_accept就需要使用阻塞的 ...

  9. IOS开始对App Store大扫除:你的APP更新了吗?

    成都亿合科技小编从北京商报了解到,对于开发APP应用的要注意啦,IOS要开始对App Store大扫除:你的APP更新了吗? 日前苹果App Store的开发者们发送邮件,表示将实施一个持续评估应用行 ...

  10. hduoj 4710 Balls Rearrangement 2013 ACM/ICPC Asia Regional Online —— Warmup

    http://acm.hdu.edu.cn/showproblem.php?pid=4710 Balls Rearrangement Time Limit: 6000/3000 MS (Java/Ot ...