RHEL7中网卡绑定team和bond的区别
red hat 官方给出的team和bond特性对比
A Comparison of Features in Bonding and Team
| Feature | Bonding | Team |
|---|---|---|
| broadcast Tx policy | Yes | Yes |
| round-robin Tx policy | Yes | Yes |
| active-backup Tx policy | Yes | Yes |
| LACP (802.3ad) support | Yes (active only) | Yes |
| Hash-based Tx policy | Yes | Yes |
| User can set hash function | No | Yes |
| Tx load-balancing support (TLB) | Yes | Yes |
| LACP hash port select | Yes | Yes |
| load-balancing for LACP support | No | Yes |
| Ethtool link monitoring | Yes | Yes |
| ARP link monitoring | Yes | Yes |
| NS/NA (IPv6) link monitoring | No | Yes |
| ports up/down delays | Yes | Yes |
| port priorities and stickiness (“primary”option enhancement) | No | Yes |
| separate per-port link monitoring setup | No | Yes |
| multiple link monitoring setup | Limited | Yes |
| lockless Tx/Rx path | No (rwlock) | Yes (RCU) |
| VLAN support | Yes | Yes |
| user-space runtime control | Limited | Full |
| Logic in user-space | No | Yes |
| Extensibility | Hard | Easy |
| Modular design | No | Yes |
| Performance overhead | Low | Very Low |
| D-Bus interface | No | Yes |
| multiple device stacking | Yes | Yes |
| zero config using LLDP | No | (in planning) |
| NetworkManager support | Yes | Yes |
RHEL7中网卡绑定team和bond的区别的更多相关文章
- Linux中实现多网卡绑定总结
在Linux中实现多网卡绑定 一.原理介绍: 1.什么是bonding? Linux bonding 驱动提供了一个把多个网络接口设备捆绑为单个的网络接口设置来使用.用于网络负载均衡及网络冗余: Li ...
- Linux下双网卡绑定bond配置实例详解
本文源自:http://blog.itpub.net/31015730/viewspace-2150185/ 一.什么是bond? 网卡bond是通过多张网卡绑定为一个逻辑网卡,实现本地网卡冗余,带宽 ...
- Linux双网卡绑定和解除
转载双网卡绑定和解除 一定要在服务管理中关闭NetworkManager服务并禁用自动启动,因为NetworkManager服务是实时生效的,一旦设置错,管理员就得回到机房接显示器配置网络连接. 以 ...
- Linux多网卡绑定(bond)及网络组(team)
Linux多网卡绑定(bond)及网络组(team) 很多时候,由于生产环境业务的特殊需求,我们需要对服务器的物理网卡实施特殊的配置,从而来满足不同业务场景下对服务器网络的特殊性要求.如高并发的网 ...
- RHEL7 下双网卡绑定做主备(冗余)
应用环境:在生产环境中,为了提高网络容错或吞吐量,一般服务器都会采取多网卡绑定的策略(此处只讲主备模式). 在RedHat 6.x下一般叫网卡做“bond”,在7.x版本中改名叫“Team”. 测试 ...
- 日常工作问题解决:rhel7下使用teamd配置双网卡绑定
目录 1.情景描述 2.准备工作 2.1 确认网卡信息 2.2 删除原有网卡配置信息 3.配置网卡绑定 3.1 配置千兆网卡双网卡热备用作心跳 3.2 配置网兆网卡双网卡负载均衡用作业务 1.情景描述 ...
- 深度分析Linux下双网卡绑定七种模式 多网卡的7种bond模式原理
http://blog.csdn.net/abc_ii/article/details/9991845多网卡的7种bond模式原理 Linux网卡绑定mode共有七种(~) bond0.bond1.b ...
- nmcli命令使用以及网卡绑定bond
一.nmcli命令 1.什么是nmcli 以前我配置网卡的时候都要打vim /etc/sysconfig/network-scripts/ifcfg-eth0这么一长串命令,有很多配置名字还记不住就需 ...
- CentOS下多网卡绑定bond/多网卡聚合
网卡bond我直接理解成网卡聚合了,就是把多张网卡虚拟成1张网卡,出口时,这张网卡无论哪个断线都不影响网络,入口时,需要结合交换机的端口聚合功能实现和网卡配置的bond模式进行负载均衡.bond需要在 ...
随机推荐
- http://elasticsearch-py.readthedocs.io/en/master/api.html
API Documentation All the API calls map the raw REST api as closely as possible, including the disti ...
- Springboot开篇
1.Spring -boot-starter-web:用于构建web 应用模块,加入后包含spring mvc框架,默认内嵌tomcat容器 2.spring-boot-starter-jpa:用于构 ...
- div + css 边框 虚线
div + css 边框 虚线 dotted:[点线|有点的|点线式边框|点虚线] .introduce { border:1px dotted gray; margin:8px 5px 8px 10 ...
- 浅谈虚拟机、Docker和Hyper技术
操作系统 我们知道: 完整的操作系统=内核+apps 内核负责管理底层硬件资源,包括CPU.内存.磁盘等等,并向上为apps提供系统调用接口,上层apps应用必须通过系统调用方式使用硬件资源,通常并不 ...
- 面向对象(四)——classmethod、staticmethod装饰器(绑定方法与非绑定方法)
classmethod.staticmethod装饰器 一.绑定方法与非绑定方法 1.绑定方法(绑定给谁,谁来调用就自动将它本身当作第一个参数传入): (1) 绑定到类的方法:用classmethod ...
- [已解决]报错UnicodeDecodeError
输出报错: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc4 in position 220: in 解决方案:将编码方式utf-8 修 ...
- 总分 Score Inflation
题目背景 学生在我们USACO的竞赛中的得分越多我们越高兴. 我们试着设计我们的竞赛以便人们能尽可能的多得分,这需要你的帮助 题目描述 我们可以从几个种类中选取竞赛的题目,这里的一个"种类& ...
- Java生产环境下性能监控与调优详解
1:JVM字节码指令与 javapjavap <options> <classes>cd monitor_tuning/target/classes/org/alanhou/m ...
- yum处理损坏的包依赖关系
有时在安装多个软件包时,某个包的软件依赖关系可能会被另外一个包的安装覆盖掉.这叫做损坏的包依赖关系(broken dependency). 如果系统出现问题,可以先尝试: yum clean all ...
- Loop Sql
-- Numeric FOR loop -- set serveroutput on -->> do not use in TOAD -- DECLARE k ; BEGIN .. LOO ...