<?xml version="1.0" encoding="UTF-8"?>

<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
--> <!--
| This is the configuration file for Maven. It can be specified at two levels:
|
| 1. User Level. This settings.xml file provides configuration for a single user,
| and is normally provided in ${user.home}/.m2/settings.xml.
|
| NOTE: This location can be overridden with the CLI option:
|
| -s /path/to/user/settings.xml
|
| 2. Global Level. This settings.xml file provides configuration for all Maven
| users on a machine (assuming they're all using the same Maven
| installation). It's normally provided in
| ${maven.conf}/settings.xml.
|
| NOTE: This location can be overridden with the CLI option:
|
| -gs /path/to/global/settings.xml
|
| The sections in this sample file are intended to give you a running start at
| getting the most out of your Maven installation. Where appropriate, the default
| values (values used when the setting is not specified) are provided.
|
|-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
<!-- localRepository
| The path to the local repository maven will use to store artifacts.
|
| Default: ${user.home}/.m2/repository
<localRepository>/path/to/local/repo</localRepository>
--> <!-- interactiveMode
| This will determine whether maven prompts you when it needs input. If set to false,
| maven will use a sensible default value, perhaps based on some other setting, for
| the parameter in question.
|
| Default: true
<interactiveMode>true</interactiveMode>
--> <!-- offline
| Determines whether maven should attempt to connect to the network when executing a build.
| This will have an effect on artifact downloads, artifact deployment, and others.
|
| Default: false
<offline>false</offline>
--> <!-- pluginGroups
| This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
| when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
| "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
|-->
<pluginGroups>
<!-- pluginGroup
| Specifies a further group identifier to use for plugin lookup.
<pluginGroup>com.your.plugins</pluginGroup>
-->
</pluginGroups> <!-- proxies
| This is a list of proxies which can be used on this machine to connect to the network.
| Unless otherwise specified (by system property or command-line switch), the first proxy
| specification in this list marked as active will be used.
|-->
<proxies>
<!-- proxy
| Specification for one proxy, to be used in connecting to the network.
|
<proxy>
<id>optional</id>
<active>true</active>
<protocol>http</protocol>
<username>proxyuser</username>
<password>proxypass</password>
<host>proxy.host.net</host>
<port>80</port>
<nonProxyHosts>local.net|some.host.com</nonProxyHosts>
</proxy>
-->
</proxies> <!-- servers
| This is a list of authentication profiles, keyed by the server-id used within the system.
| Authentication profiles can be used whenever maven must make a connection to a remote server.
|-->
<servers>
<!-- server
| Specifies the authentication information to use when connecting to a particular server, identified by
| a unique name within the system (referred to by the 'id' attribute below).
|
| NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
| used together.
|
<server>
<id>deploymentRepo</id>
<username>repouser</username>
<password>repopwd</password>
</server>
--> <!-- Another sample, using keys to authenticate.
<server>
<id>siteServer</id>
<privateKey>/path/to/private/key</privateKey>
<passphrase>optional; leave empty if not used.</passphrase>
</server>
-->
</servers> <!-- mirrors
| This is a list of mirrors to be used in downloading artifacts from remote repositories.
|
| It works like this: a POM may declare a repository to use in resolving certain artifacts.
| However, this repository may have problems with heavy traffic at times, so people have mirrored
| it to several places.
|
| That repository definition will have a unique id, so we can create a mirror reference for that
| repository, to be used as an alternate download site. The mirror site will be the preferred
| server for that repository.
|-->
<mirrors>
<!-- mirror
| Specifies a repository mirror site to use instead of a given repository. The repository that
| this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
| for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
|-->
<mirror>
<id>aliyunmaven</id>
<mirrorOf>*</mirrorOf>
<name>阿里云公共仓库</name>
<url>https://maven.aliyun.com/repository/public</url>
</mirror> </mirrors> <!-- profiles
| This is a list of profiles which can be activated in a variety of ways, and which can modify
| the build process. Profiles provided in the settings.xml are intended to provide local machine-
| specific paths and repository locations which allow the build to work in the local environment.
|
| For example, if you have an integration testing plugin - like cactus - that needs to know where
| your Tomcat instance is installed, you can provide a variable here such that the variable is
| dereferenced during the build process to configure the cactus plugin.
|
| As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
| section of this document (settings.xml) - will be discussed later. Another way essentially
| relies on the detection of a system property, either matching a particular value for the property,
| or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
| value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
| Finally, the list of active profiles can be specified directly from the command line.
|
| NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
| repositories, plugin repositories, and free-form properties to be used as configuration
| variables for plugins in the POM.
|
|-->
<profiles>
<!-- profile
| Specifies a set of introductions to the build process, to be activated using one or more of the
| mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
| or the command line, profiles have to have an ID that is unique.
|
| An encouraged best practice for profile identification is to use a consistent naming convention
| for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
| This will make it more intuitive to understand what the set of introduced profiles is attempting
| to accomplish, particularly when you only have a list of profile id's for debug.
|
| This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
<profile>
<id>jdk-1.4</id> <activation>
<jdk>1.4</jdk>
</activation> <repositories>
<repository>
<id>jdk14</id>
<name>Repository for JDK 1.4 builds</name>
<url>http://www.myhost.com/maven/jdk14</url>
<layout>default</layout>
<snapshotPolicy>always</snapshotPolicy>
</repository>
</repositories>
</profile>
--> <!--
| Here is another profile, activated by the system property 'target-env' with a value of 'dev',
| which provides a specific path to the Tomcat instance. To use this, your plugin configuration
| might hypothetically look like:
|
| ...
| <plugin>
| <groupId>org.myco.myplugins</groupId>
| <artifactId>myplugin</artifactId>
|
| <configuration>
| <tomcatLocation>${tomcatPath}</tomcatLocation>
| </configuration>
| </plugin>
| ...
|
| NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
| anything, you could just leave off the <value/> inside the activation-property.
|
<profile>
<id>env-dev</id> <activation>
<property>
<name>target-env</name>
<value>dev</value>
</property>
</activation> <properties>
<tomcatPath>/path/to/tomcat/instance</tomcatPath>
</properties>
</profile>
-->
<profile>
<id>dev</id>
<repositories>
<repository>
<id>nexus</id>
<name>local private nexus</name>
<url>https://maven.aliyun.com/repository/public</url>
<releases>
<enabled>true</enabled>
</releases>
<snapshots>
<enabled>false</enabled>
</snapshots>
</repository>
</repositories>
<pluginRepositories>
<pluginRepository>
<id>nexus</id>
<name>local private nexus</name>
<url>https://maven.aliyun.com/repository/public</url>
<releases>
<enabled>true</enabled>
</releases>
<snapshots>
<enabled>false</enabled>
</snapshots>
</pluginRepository>
</pluginRepositories>
</profile>
</profiles> <!-- activeProfiles
| List of profiles that are active for all builds.
|
<activeProfiles>
<activeProfile>alwaysActiveProfile</activeProfile>
<activeProfile>anotherAlwaysActiveProfile</activeProfile>
</activeProfiles>
-->
<activeProfiles>
<activeProfile>dev</activeProfile>
</activeProfiles>
</settings>

将Maven和Plugins的源都改为阿里镜像的Setting.xml的更多相关文章

  1. 修改CentOS的yum源,改为阿里云的镜像

    修改CentOS的yum源,改为阿里云的镜像 1.备份 mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.b ...

  2. maven 镜像仓库 setting.xml修改 & 手动导入的包如何加到maven里面

    如果不知道maven安装路径IDEA中打File->Settings   再点Build->Maven右边看maven安装路径,打开这个路径,再打开conf/settings.xml文件 ...

  3. IDEA的Maven设置阿里镜像

    作为一名.net开发学习java,虽然学习起来没啥难度,但是各种配置实在让人头大. 下面就简单记录下IDEA的Maven设置阿里镜像 进入开发软件的这个设置 点击进入 如图所示 第一个是你安装mave ...

  4. Maven中央仓库源地址改为阿里云(IDEA)

    我的Maven是IDEA2017.1.2集成的,所以settings.xml在此位置 E:\Program Files\JetBrains\IntelliJ IDEA 2017.1.2\plugins ...

  5. maven配置中国下载源【转:http://www.cnblogs.com/libingbin/p/5949483.html】

    修改 配置文件 maven 安装 路径 F:\apache-maven-3.3.9\conf 修改 settings.xml或者在.m2文件夹下新建一个settings.xml 阿里源 <mir ...

  6. maven出现不再支持源选项 1.5。请使用 1.6 或更高版本

    maven出现不再支持源选项 1.5.请使用 1.6 或更高版本 学习了:http://blog.csdn.net/sosous/article/details/78312867 错误: [ERROR ...

  7. Maven [ERROR] 不再支持源选项 5,请使用 7 或更高版本的解决办法

    刚刚学Maven,当我点击test时 就出现了这两个错误: [ERROR] 不再支持源选项 5.请使用 7 或更高版本.[ERROR] 不再支持目标选项 5.请使用 7 或更高版本. 后来在看到这篇文 ...

  8. ubuntu16.04 LTS把下载源改为阿里云的源

    为什么要切换下载源到国内的源上? Ubuntu的中国服务器下载速度很慢,我们可以尝试修改软件更新源,这样下载和更新软件的速度会加快很多. 一.linux系统版本: ubuntukylin-16.04- ...

  9. 在MyEclipse里连接Tomcat部署到项目(maven项目和web项目都适用)

    前提, Tomcat *的下载(绿色版和安装版都适用) Tomcat *的安装和运行(绿色版和安装版都适用) Tomcat的配置文件详解 在Eclipse里连接Tomcat部署到项目(maven项目和 ...

  10. 当在myeclipse里发送邮件有错误时,不妨把环境都改成jdk的

    当在myeclipse里发送邮件有错误时,不妨把环境都改成jdk的, 如果是jre的环境会出错,改成jdk的就行了.

随机推荐

  1. docker中的mysql时区修改

    永久修改 进入容器 docker exec -it mysql5.7 bash 查看当前时区 date -R 修改时区 cp /usr/share/zoneinfo/PRC /etc/localtim ...

  2. 关于Docker容器中的DNS配置

    Docker: 1.启动时指定: docker run --dns 8.8.8.8 busybox:latest 2.全局配置: vi /etc/docker/daemon.json { " ...

  3. 【游戏】C语言实现扫雷游戏(超详细备注和解释)

    C语言实现扫雷游戏 求个赞求个赞求个赞求个赞 谢谢 先赞后看好习惯 打字不容易,这都是很用心做的,希望得到支持你 大家的点赞和支持对于我来说是一种非常重要的动力 看完之后别忘记关注我哦!️️️ 文章目 ...

  4. Java开发学习(二十)----AOP总结

    一.AOP的核心概念 概念:AOP(Aspect Oriented Programming)面向切面编程,一种编程范式 作用:在不惊动原始设计的基础上为方法进行功能增强 核心概念 代理(Proxy): ...

  5. flutter3+dart3聊天室|Flutter3跨平台仿微信App语音聊天/朋友圈

    全新研发flutter3+dart3+photo_view跨多端仿微信App界面聊天Flutter3-Chat. flutter3-chat基于最新跨全平台技术flutter3+dart3+mater ...

  6. SESSION会话机制解析

    Windows Session(会话)的概念 会话 session 是由代表单个用户登录会话的所有进程和系统对象组成的.其中的对象包括所有的窗口,桌面和windows stations.桌面是特定se ...

  7. Linux-使用cat查看文件后出现乱码,整个终端显示包括shell提示符都是乱码

    问题描述:在bash下用cat显示二进制文件后会出现乱码,整个终端显示包括shell提示符都是乱码,这个跟语言环境无关. 解决办法: 恢复的话,大致有以下几种方法:方法一:盲打输入echo -e '\ ...

  8. Power BI 9 DAY

    图形决策树

  9. 多线程系列(三) -synchronized 关键字使用详解

    一.简介 在之前的线程系列文章中,我们介绍了线程创建的几种方式以及常用的方法介绍. 今天我们接着聊聊多线程线程安全的问题,以及解决办法. 实际上,在多线程环境中,难免会出现多个线程对一个对象的实例变量 ...

  10. 【framework】TaskStack简介

    1 前言 ​ TaskStack 用于管理 app,一般一个应用程序对应一个 TaskStack,其父容器为 TaskStackContainers(DisplayContent 的子容器),子容器为 ...