Maven学习存档（2）——settings.xml配置

二、settings.xml配置

2.1 原文

 <?xml version="1.0" encoding="UTF-8"?>

 <!--
 Licensed to the Apache Software Foundation (ASF) under one
 or more contributor license agreements.  See the NOTICE file
 distributed with this work for additional information
 regarding copyright ownership.  The ASF licenses this file
 to you under the Apache License, Version 2.0 (the
 "License"); you may not use this file except in compliance
 with the License.  You may obtain a copy of the License at

     http://www.apache.org/licenses/LICENSE-2.0

 Unless required by applicable law or agreed to in writing,
 software distributed under the License is distributed on an
 "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 KIND, either express or implied.  See the License for the
 specific language governing permissions and limitations
 under the License.
 -->

 <!--
  | This is the configuration file for Maven. It can be specified at two levels:
  |
  |  1. User Level. This settings.xml file provides configuration for a single user,
  |                 and is normally provided in ${user.home}/.m2/settings.xml.
  |
  |                 NOTE: This location can be overridden with the CLI option:
  |
  |                 -s /path/to/user/settings.xml
  |
  |  2. Global Level. This settings.xml file provides configuration for all Maven
  |                 users on a machine (assuming they're all using the same Maven
  |                 installation). It's normally provided in
  |                 ${maven.conf}/settings.xml.
  |
  |                 NOTE: This location can be overridden with the CLI option:
  |
  |                 -gs /path/to/global/settings.xml
  |
  | The sections in this sample file are intended to give you a running start at
  | getting the most out of your Maven installation. Where appropriate, the default
  | values (values used when the setting is not specified) are provided.
  |
  |-->
 <settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
           xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
           xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
   <!-- localRepository
    | The path to the local repository maven will use to store artifacts.
    |
    | Default: ${user.home}/.m2/repository
   <localRepository>/path/to/local/repo</localRepository>
   -->
   <localRepository>
     D:/apache-maven-3.5.2/repository
   </localRepository>

   <!-- interactiveMode
    | This will determine whether maven prompts you when it needs input. If set to false,
    | maven will use a sensible default value, perhaps based on some other setting, for
    | the parameter in question.
    |
    | Default: true
   <interactiveMode>true</interactiveMode>
   -->

   <!-- offline
    | Determines whether maven should attempt to connect to the network when executing a build.
    | This will have an effect on artifact downloads, artifact deployment, and others.
    |
    | Default: false
   <offline>false</offline>
   -->

   <!-- pluginGroups
    | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
    | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
    | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
    |-->
   <pluginGroups>
     <!-- pluginGroup
      | Specifies a further group identifier to use for plugin lookup.
     <pluginGroup>com.your.plugins</pluginGroup>
     -->
   </pluginGroups>

   <!-- proxies
    | This is a list of proxies which can be used on this machine to connect to the network.
    | Unless otherwise specified (by system property or command-line switch), the first proxy
    | specification in this list marked as active will be used.
    |-->
   <proxies>
     <!-- proxy
      | Specification for one proxy, to be used in connecting to the network.
      |
     <proxy>
       <id>optional</id>
       <active>true</active>
       <protocol>http</protocol>
       <username>proxyuser</username>
       <password>proxypass</password>
       <host>proxy.host.net</host>
       <port>80</port>
       <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
     </proxy>
     -->
   </proxies>

   <!-- servers
    | This is a list of authentication profiles, keyed by the server-id used within the system.
    | Authentication profiles can be used whenever maven must make a connection to a remote server.
    |-->
   <servers>
     <!-- server
      | Specifies the authentication information to use when connecting to a particular server, identified by
      | a unique name within the system (referred to by the 'id' attribute below).
      |
      | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
      |       used together.
      |
     <server>
       <id>deploymentRepo</id>
       <username>repouser</username>
       <password>repopwd</password>
     </server>
     -->

     <!-- Another sample, using keys to authenticate.
     <server>
       <id>siteServer</id>
       <privateKey>/path/to/private/key</privateKey>
       <passphrase>optional; leave empty if not used.</passphrase>
     </server>
     -->
   </servers>

   <!-- mirrors
    | This is a list of mirrors to be used in downloading artifacts from remote repositories.
    |
    | It works like this: a POM may declare a repository to use in resolving certain artifacts.
    | However, this repository may have problems with heavy traffic at times, so people have mirrored
    | it to several places.
    |
    | That repository definition will have a unique id, so we can create a mirror reference for that
    | repository, to be used as an alternate download site. The mirror site will be the preferred
    | server for that repository.
    |-->
   <mirrors>
     <!-- mirror
      | Specifies a repository mirror site to use instead of a given repository. The repository that
      | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
      | for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
      |
     <mirror>
       <id>mirrorId</id>
       <mirrorOf>repositoryId</mirrorOf>
       <name>Human Readable Name for this Mirror.</name>
       <url>http://my.repository.com/repo/path</url>
     </mirror>
      -->
     <mirror>
       <id>alimaven</id>
       <name>aliyun maven</name>
       <url>http://maven.aliyun.com/nexus/content/groups/public/</url>
       <mirrorOf>central</mirrorOf>
     </mirror> 

   </mirrors>

   <!-- profiles
    | This is a list of profiles which can be activated in a variety of ways, and which can modify
    | the build process. Profiles provided in the settings.xml are intended to provide local machine-
    | specific paths and repository locations which allow the build to work in the local environment.
    |
    | For example, if you have an integration testing plugin - like cactus - that needs to know where
    | your Tomcat instance is installed, you can provide a variable here such that the variable is
    | dereferenced during the build process to configure the cactus plugin.
    |
    | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
    | section of this document (settings.xml) - will be discussed later. Another way essentially
    | relies on the detection of a system property, either matching a particular value for the property,
    | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
    | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
    | Finally, the list of active profiles can be specified directly from the command line.
    |
    | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
    |       repositories, plugin repositories, and free-form properties to be used as configuration
    |       variables for plugins in the POM.
    |
    |-->
   <profiles>
     <!-- profile
      | Specifies a set of introductions to the build process, to be activated using one or more of the
      | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
      | or the command line, profiles have to have an ID that is unique.
      |
      | An encouraged best practice for profile identification is to use a consistent naming convention
      | for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
      | This will make it more intuitive to understand what the set of introduced profiles is attempting
      | to accomplish, particularly when you only have a list of profile id's for debug.
      |
      | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
     <profile>
       <id>jdk-1.4</id>

       <activation>
         <jdk>1.4</jdk>
       </activation>

       <repositories>
         <repository>
           <id>jdk14</id>
           <name>Repository for JDK 1.4 builds</name>
           <url>http://www.myhost.com/maven/jdk14</url>
           <layout>default</layout>
           <snapshotPolicy>always</snapshotPolicy>
         </repository>
       </repositories>
     </profile>
     -->

     <!--
      | Here is another profile, activated by the system property 'target-env' with a value of 'dev',
      | which provides a specific path to the Tomcat instance. To use this, your plugin configuration
      | might hypothetically look like:
      |
      | ...
      | <plugin>
      |   <groupId>org.myco.myplugins</groupId>
      |   <artifactId>myplugin</artifactId>
      |
      |   <configuration>
      |     <tomcatLocation>${tomcatPath}</tomcatLocation>
      |   </configuration>
      | </plugin>
      | ...
      |
      | NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
      |       anything, you could just leave off the <value/> inside the activation-property.
      |
     <profile>
       <id>env-dev</id>

       <activation>
         <property>
           <name>target-env</name>
           <value>dev</value>
         </property>
       </activation>

       <properties>
         <tomcatPath>/path/to/tomcat/instance</tomcatPath>
       </properties>
     </profile>
     -->
   </profiles>

   <!-- activeProfiles
    | List of profiles that are active for all builds.
    |
   <activeProfiles>
     <activeProfile>alwaysActiveProfile</activeProfile>
     <activeProfile>anotherAlwaysActiveProfile</activeProfile>
   </activeProfiles>
   -->
 </settings>

settings.xml原文

该settings.xml位于maven文件夹中的conf文件夹下

2.2 简介

略过第一段注释（全是废话），看第二段注释

如第二段注释所说，配置有2处：用户配置和全局配置

用户配置路径为${user.home}/.m2/settings.xml，该配置需用户自行创建

全局配置路径为${maven.conf}/settings.xml，该配置为maven自带配置，即原文所在位置

当两者都存在时，maven会合并这2个配置；有相同配置参数时，有效值为用户配置中的参数

看完开头的介绍后，可以开始看配置的正文部分了，为方便查看，先将所有注释去掉，保留默认部分，如下

 <?xml version="1.0" encoding="UTF-8"?>

 <settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
           xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
           xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">

   <localRepository>${user.home}/.m2/repository</localRepository>

   <interactiveMode>true</interactiveMode>

   <offline>false</offline>

   <pluginGroups></pluginGroups>

   <proxies></proxies>

   <servers></servers>

   <mirrors></mirrors>

   <profiles></profiles>

   <activeProfiles></activeProfiles>

 </settings>

settings.xml精简

2.2.1 localRepository

本地仓库路径，默认路径为${user.home}/.m2/repository。为了避免重装系统而被删除，可在maven文件夹下创建个repository文件夹，将该节点改为该repository文件夹的路径即可

2.2.2 interactiveMode

互动模式，默认值为true。该值使用默认值即可，无需更改

2.2.3 offline

离线模式，默认值为false。当因为各种原因无法与远程仓库连接时，可将该值修改为true

2.2.4 pluginGroups

 <pluginGroups>
     <pluginGroup>com.your.plugins</pluginGroup>
 </pluginGroups>

插件组，内部由n个pluginGroup节点组成，默认自带了org.apache.maven.plugins和org.codehaus.mojo。若有特殊的需求是可进行扩展

2.2.5 proxies

 <proxies>
     <proxy>
       <id>optional</id>
       <active>true</active>
       <protocol>http</protocol>
       <username>proxyuser</username>
       <password>proxypass</password>
       <host>proxy.host.net</host>
       <port>80</port>
       <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
     </proxy>
 </proxies>

代理设置，内部由n个proxy节点组成。部分公司出于安全考虑会需要员工通过代理才可上网，这时，就需配置该节点的参数了。

参数说明：

id：唯一标识符

active：是否被激活使用，默认为true。当有多个proxy节点存在时，用于选择使用哪个代理，但同一时间仅有一个代理会被被激活

protocol：协议类型

username：用户名，没有可不填

password：密码，没有可不填

host：IP地址

port：端口号

nonProxyHosts：不使用代理的地址

以上参数在通常配置代理的情况都会使用到，一样填上即可，最终的代理地址为protocol://host:port

2.2.6 servers

 <servers>
     <server>
       <id>deploymentRepo</id>
       <username>repouser</username>
       <password>repopwd</password>
     </server>
     <server>
       <id>siteServer</id>
       <privateKey>/path/to/private/key</privateKey>
       <passphrase>optional; leave empty if not used</passphrase>
     </server>
 </servers>

服务器，内部由n个server节点组成。有2种配置方式：一种是通过id匹配，username和password进行认证登录；另一种是通过id匹配指向一个privateKey（私钥）和一个passphrase

2.2.7 mirrors

 <mirrors>
     <mirror>
       <id>mirrorId</id>
       <mirrorOf>repositoryId</mirrorOf>
       <name>Human Readable Name for this Mirror.</name>
       <url>http://my.repository.com/repo/path</url>
     </mirror>
 </mirrors>

镜像仓库，内部由n个mirror节点组成。用来代替中央仓库（Maven默认的远程仓库），用于提升传输速度。因此此处可以添加一个镜像，以提升我们下载的速度

<mirrors>
    <mirror>
      <id>alimaven</id>
      <name>aliyun maven</name>
      <url>http://maven.aliyun.com/nexus/content/groups/public/</url>
      <mirrorOf>central</mirrorOf>
    </mirror>
</mirrors>

2.2.8 profiles

 <profiles>
     <profile>
       <id>jdk-1.4</id>
       <activation>
         <jdk>1.4</jdk>
       </activation>
       <repositories>
         <repository>
           <id>jdk14</id>
           <name>Repository for JDK 1.4 builds</name>
           <url>http://www.myhost.com/maven/jdk14</url>
           <layout>default</layout>
           <snapshotPolicy>always</snapshotPolicy>
         </repository>
       </repositories>
     </profile>
     <profile>
       <id>env-dev</id>
       <activation>
         <property>
           <name>target-env</name>
           <value>dev</value>
         </property>
       </activation>
       <properties>
         <tomcatPath>/path/to/tomcat/instance</tomcatPath>
       </properties>
     </profile>
   </profiles>

用于覆盖在一个POM或者profiles.xml文件中的任何相同id的profiles节点

2.2.9 activeProfiles

 <activeProfiles>
     <activeProfile>alwaysActiveProfile</activeProfile>
     <activeProfile>anotherAlwaysActiveProfile</activeProfile>
 </activeProfiles>

activeProfile值为profile中所定义的id，在这里定义的activeProfile总是被激活

2.3 总结

一般情况而言，settings.xml无需配置太多的东西，作为优化，可配置localRepository和mirrors

<?xml version="1.0" encoding="UTF-8"?>

<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
          xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">

  <localRepository>
    D:/apache-maven-3.5.2/repository
  </localRepository>

  <pluginGroups></pluginGroups>

  <proxies></proxies>

  <servers></servers>

  <mirrors>
    <mirror>
      <id>alimaven</id>
      <name>aliyun maven</name>
      <url>http://maven.aliyun.com/nexus/content/groups/public/</url>
      <mirrorOf>central</mirrorOf>
    </mirror>
  </mirrors>

  <profiles></profiles>

</settings>

优化settings.xml