阿里maven镜像服务器配置
把下面的配置复制到 .m2/settings.xml配置文件中。
<?xml version="1.0" encoding="UTF-8"?> <!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
--> <!--
| This is the configuration file for Maven. It can be specified at two levels:
|
| 1. User Level. This settings.xml file provides configuration for a single user,
| and is normally provided in ${user.home}/.m2/settings.xml.
|
| NOTE: This location can be overridden with the CLI option:
|
| -s /path/to/user/settings.xml
|
| 2. Global Level. This settings.xml file provides configuration for all Maven
| users on a machine (assuming they're all using the same Maven
| installation). It's normally provided in
| ${maven.home}/conf/settings.xml.
|
| NOTE: This location can be overridden with the CLI option:
|
| -gs /path/to/global/settings.xml
|
| The sections in this sample file are intended to give you a running start at
| getting the most out of your Maven installation. Where appropriate, the default
| values (values used when the setting is not specified) are provided.
|
|-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
<!-- localRepository
| The path to the local repository maven will use to store artifacts.
|
| Default: ${user.home}/.m2/repository
<localRepository>/path/to/local/repo</localRepository>
-->
<localRepository>D:\Repositories\Maven</localRepository> <!-- interactiveMode
| This will determine whether maven prompts you when it needs input. If set to false,
| maven will use a sensible default value, perhaps based on some other setting, for
| the parameter in question.
|
| Default: true
<interactiveMode>true</interactiveMode>
--> <!-- offline
| Determines whether maven should attempt to connect to the network when executing a build.
| This will have an effect on artifact downloads, artifact deployment, and others.
|
| Default: false
<offline>false</offline>
--> <!-- pluginGroups
| This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
| when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
| "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
|-->
<pluginGroups>
<!-- pluginGroup
| Specifies a further group identifier to use for plugin lookup.
<pluginGroup>com.your.plugins</pluginGroup>
-->
<pluginGroup>org.mortbay.jetty</pluginGroup>
</pluginGroups> <!-- proxies
| This is a list of proxies which can be used on this machine to connect to the network.
| Unless otherwise specified (by system property or command-line switch), the first proxy
| specification in this list marked as active will be used.
|-->
<proxies>
<!-- proxy
| Specification for one proxy, to be used in connecting to the network.
|
<proxy>
<id>optional</id>
<active>true</active>
<protocol>http</protocol>
<username>proxyuser</username>
<password>proxypass</password>
<host>proxy.host.net</host>
<port>80</port>
<nonProxyHosts>local.net|some.host.com</nonProxyHosts>
</proxy>
-->
</proxies> <!-- servers
| This is a list of authentication profiles, keyed by the server-id used within the system.
| Authentication profiles can be used whenever maven must make a connection to a remote server.
|-->
<servers>
<!-- server
| Specifies the authentication information to use when connecting to a particular server, identified by
| a unique name within the system (referred to by the 'id' attribute below).
|
| NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
| used together.
|
<server>
<id>deploymentRepo</id>
<username>repouser</username>
<password>repopwd</password>
</server>
--> <!-- Another sample, using keys to authenticate.
<server>
<id>siteServer</id>
<privateKey>/path/to/private/key</privateKey>
<passphrase>optional; leave empty if not used.</passphrase>
</server>
-->
<server>
<id>releases</id>
<username>ali</username>
<password>ali</password>
</server>
<server>
<id>Snapshots</id>
<username>ali</username>
<password>ali</password>
</server>
</servers> <!-- mirrors
| This is a list of mirrors to be used in downloading artifacts from remote repositories.
|
| It works like this: a POM may declare a repository to use in resolving certain artifacts.
| However, this repository may have problems with heavy traffic at times, so people have mirrored
| it to several places.
|
| That repository definition will have a unique id, so we can create a mirror reference for that
| repository, to be used as an alternate download site. The mirror site will be the preferred
| server for that repository.
|-->
<mirrors>
<!-- mirror
| Specifies a repository mirror site to use instead of a given repository. The repository that
| this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
| for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
|
<mirror>
<id>mirrorId</id>
<mirrorOf>repositoryId</mirrorOf>
<name>Human Readable Name for this Mirror.</name>
<url>http://my.repository.com/repo/path</url>
</mirror>
-->
<mirror>
<!--This sends everything else to /public -->
<id>nexus</id>
<mirrorOf>*</mirrorOf>
<url>http://maven.aliyun.com/nexus/content/groups/public/</url>
</mirror>
<mirror>
<!--This is used to direct the public snapshots repo in the
profile below over to a different nexus group -->
<id>nexus-public-snapshots</id>
<mirrorOf>public-snapshots</mirrorOf>
<url>http://maven.aliyun.com/nexus/content/repositories/snapshots/</url>
</mirror>
</mirrors> <!-- profiles
| This is a list of profiles which can be activated in a variety of ways, and which can modify
| the build process. Profiles provided in the settings.xml are intended to provide local machine-
| specific paths and repository locations which allow the build to work in the local environment.
|
| For example, if you have an integration testing plugin - like cactus - that needs to know where
| your Tomcat instance is installed, you can provide a variable here such that the variable is
| dereferenced during the build process to configure the cactus plugin.
|
| As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
| section of this document (settings.xml) - will be discussed later. Another way essentially
| relies on the detection of a system property, either matching a particular value for the property,
| or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
| value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
| Finally, the list of active profiles can be specified directly from the command line.
|
| NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
| repositories, plugin repositories, and free-form properties to be used as configuration
| variables for plugins in the POM.
|
|-->
<profiles>
<profile>
<id>development</id>
<repositories>
<repository>
<id>central</id>
<url>http://central</url>
<releases><enabled>true</enabled><updatePolicy>always</updatePolicy></releases>
<snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
</repository>
</repositories>
<pluginRepositories>
<pluginRepository>
<id>central</id>
<url>http://central</url>
<releases><enabled>true</enabled><updatePolicy>always</updatePolicy></releases>
<snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
</pluginRepository>
</pluginRepositories>
</profile>
<profile>
<!--this profile will allow snapshots to be searched when activated-->
<id>public-snapshots</id>
<repositories>
<repository>
<id>public-snapshots</id>
<url>http://public-snapshots</url>
<releases><enabled>false</enabled></releases>
<snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
</repository>
</repositories>
<pluginRepositories>
<pluginRepository>
<id>public-snapshots</id>
<url>http://public-snapshots</url>
<releases><enabled>false</enabled></releases>
<snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
</pluginRepository>
</pluginRepositories>
</profile>
</profiles> <activeProfiles>
<activeProfile>development</activeProfile>
<activeProfile>public-snapshots</activeProfile>
</activeProfiles>
</settings>
github地址:https://github.com/ae6623/Zebra/blob/master/maven-repo-settings-ali.xml
阿里maven仓库地址:http://maven.aliyun.com/nexus/#view-repositories;public~browsestorage
阿里maven镜像服务器配置的更多相关文章
- 在pom.xml文件中自定义JDK版本+阿里maven镜像修改
在学习和开发中 总是修改jdk版本 但是这些配置文件又不想记 在此记录一下 方便查询: <build> <plugins> <!-- 指定jdk --> <p ...
- 如何配置阿里Maven镜像
1.下载maven的zip解压,官方下载地址为:http://maven.apache.org/download.cgi 选择需要下载maven的版本就好了 2.到下载的maven路径下,conf/s ...
- 阿里maven镜像配置
setting.xml<mirrors> <mirror> <id>alimaven</id> <name>aliyun maven< ...
- idea配置阿里maven镜像
首先打开IDEA安装路径下的:"\plugins\maven\lib\maven3\conf\settings.xml" 找到里面的mirror配置,进行修改如下: <mir ...
- Maven镜像收集
本贴主要收集国内国外速度比较快的maven镜像,OSC的MAVEN已经关闭了 0.阿里Maven镜像 setting.xml https://github.com/ae6623/Zebra/blob/ ...
- 国内阿里Maven仓库镜像及自己收集镜像库
国内阿里Maven仓库镜像Maven配置文件Maven仓库速度快 国内连接maven官方的仓库更新依赖库,网速一般很慢,收集一些国内快速的maven仓库镜像以备用. 最新更新:2016年11月11 ...
- 阿里云Maven配置,Maven仓库配置,Maven镜像配置
阿里云Maven配置,Maven仓库配置,Maven镜像配置 ======================== 蕃薯耀 2018年1月29日 http://www.cnblogs.com/fanshu ...
- (二)初探Maven之设置代理和阿里云镜像
引言: 在许多公司,可能因为安全性的要求配置了代理服务器,用户无法直接访问外网,所以在项目中使用Maven必须设置好代理才能下载依赖. 并且直接从中央仓库下载依 ...
- Maven镜像更换为阿里云中央仓库
前言 maven仓库默认在国外,使用难免很慢,尤其是下载依赖的时候,换为国内镜像,让你感受飞一般的感觉.国内支持maven镜像的有阿里云,开源中国等,这里换为阿里云的. 更换 修改maven配置文件s ...
随机推荐
- vue项目如何打包扔向服务器
vue项目如何打包扔向服务器 当我们将 vue 项目完成后,面临的就是如何将项目进行打包上线,放到服务器中.我使用的是 vue-cli(simple) 脚手架,所以就讲一下如何将项目进行打包,并放 ...
- 《深度学习》Textbook第十章学习笔记
深度学习 第10章 序列建模:循环和递归网络 1.循环神经网络介绍 相比卷积神经网络:专门用于处理网格化的数据(如图像),可以很容易扩展到更具有很大宽度和高度的图像,以及处理大小可变的图像: 循环神经 ...
- Git学习笔记-精简版
注意本文参考廖雪博客: http://www.liaoxuefeng.com/wiki/0013739516305929606dd18361248578c67b8067c8c017b000 一:Git ...
- 07 Spring框架 依赖注入(四)基于注解的依赖注入
前面几节我们都在使用xml进行依赖的注入,但是在实际的开发中我们往往偏爱于使用注解进行依赖注入,因为这样更符合我们人的思维,并且更加快捷,本节就来讲述Spring基于注解的依赖注入: 信息注入注解 @ ...
- cdoj1342郭大侠与甲铁城
地址:http://acm.uestc.edu.cn/#/problem/show/1342 题目: 郭大侠与甲铁城 Time Limit: 1500/800MS (Java/Others) ...
- $微信小程序开发实践点滴——Bmob常用API的使用
Bmob后端云官网:http://www.bmob.cn/ Bmob后端云微信小程序开发文档:http://docs.bmob.cn/data/wechatApp/b_developdoc/doc/i ...
- iOS应用内付费(IAP)开发步骤
1.苹果iTunes Connect内购产品信息录入. 1)创建app内购买项目(Create New),选择类型: 1.消耗型项目 对于消耗型 App 内购买项目,用户每次下载时都必须进行购买.一次 ...
- 笔记——Springboot response、ServletOutputStream、图形验证码显示慢
今天遇到一个图形验证码加载很慢的问题,大概耗时有200~500毫秒左右. 根据追踪,图形验证码图片生成耗时0~1毫秒,而response.getOutputStream.write()将图片写入前台页 ...
- 【Head First Servlets and JSP】笔记22:直接从请求到JSP & 获取Person的嵌套属性
直接从请求到JSP,不经过servlet <!DOCTYPE html> <html lang="en"> <head> <meta ch ...
- Apache 工作模式配置优化
Apahce 工作模式配置 1.查看当前MPM工作模式 /usr/local/apache2/bin/apachectl -V Server version: Apache/2.4.27 (Unix) ...