CentOS7.6安装Maven
官网下载地址:http://maven.apache.org/download.cgi
第一步:软件下载安装
进行安装目录:cd /opt/software (如果目录不存在,请先创建目录)
下载二进制包:wget http://mirror.bit.edu.cn/apache/maven/maven-3/3.6.0/binaries/apache-maven-3.6.0-bin.tar.gz (wget命令如果不存在,请先安装wget:yum install -y wget)
解压:tar -zxvf apache-maven-3.6.0-bin.tar.gz
删除二进制包:rm -rf apache-maven-3.6.0-bin.tar.gz
第二步:配置环境变量
编辑环境变量文件:vi /etc/profile,添加内容如下:
export M2_HOME=/opt/software/apache-maven-3.6.0
export PATH=$PATH:${M2_HOME}/bin
第三步:保存环境变量
source /etc/profile
第四步:检查安装版本
mvn -version
第五步:修改配置文件,添加内容如下:红色字体部分
<?xml version="1.0" encoding="UTF-8"?> <!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
--> <!--
| This is the configuration file for Maven. It can be specified at two levels:
|
| 1. User Level. This settings.xml file provides configuration for a single user,
| and is normally provided in ${user.home}/.m2/settings.xml.
|
| NOTE: This location can be overridden with the CLI option:
|
| -s /path/to/user/settings.xml
|
| 2. Global Level. This settings.xml file provides configuration for all Maven
| users on a machine (assuming they're all using the same Maven
| installation). It's normally provided in
| ${maven.conf}/settings.xml.
|
| NOTE: This location can be overridden with the CLI option:
|
| -gs /path/to/global/settings.xml
|
| The sections in this sample file are intended to give you a running start at
| getting the most out of your Maven installation. Where appropriate, the default
| values (values used when the setting is not specified) are provided.
|
|-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
<!-- localRepository
| The path to the local repository maven will use to store artifacts.
|
| Default: ${user.home}/.m2/repository
<localRepository>/path/to/local/repo</localRepository>
-->
<localRepository>/usr/local/.m2/repository</localRepository> <!-- interactiveMode
| This will determine whether maven prompts you when it needs input. If set to false,
| maven will use a sensible default value, perhaps based on some other setting, for
| the parameter in question.
|
| Default: true
<interactiveMode>true</interactiveMode>
--> <!-- offline
| Determines whether maven should attempt to connect to the network when executing a build.
| This will have an effect on artifact downloads, artifact deployment, and others.
|
| Default: false
<offline>false</offline>
--> <!-- pluginGroups
| This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
| when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
| "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
|-->
<pluginGroups>
<!-- pluginGroup
| Specifies a further group identifier to use for plugin lookup.
<pluginGroup>com.your.plugins</pluginGroup>
-->
</pluginGroups> <!-- proxies
| This is a list of proxies which can be used on this machine to connect to the network.
| Unless otherwise specified (by system property or command-line switch), the first proxy
| specification in this list marked as active will be used.
|-->
<proxies>
<!-- proxy
| Specification for one proxy, to be used in connecting to the network.
|
<proxy>
<id>optional</id>
<active>true</active>
<protocol>http</protocol>
<username>proxyuser</username>
<password>proxypass</password>
<host>proxy.host.net</host>
<port>80</port>
<nonProxyHosts>local.net|some.host.com</nonProxyHosts>
</proxy>
-->
</proxies> <!-- servers
| This is a list of authentication profiles, keyed by the server-id used within the system.
| Authentication profiles can be used whenever maven must make a connection to a remote server.
|-->
<servers>
<!-- server
| Specifies the authentication information to use when connecting to a particular server, identified by
| a unique name within the system (referred to by the 'id' attribute below).
|
| NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
| used together.
|
<server>
<id>deploymentRepo</id>
<username>repouser</username>
<password>repopwd</password>
</server>
--> <!-- Another sample, using keys to authenticate.
<server>
<id>siteServer</id>
<privateKey>/path/to/private/key</privateKey>
<passphrase>optional; leave empty if not used.</passphrase>
</server>
-->
</servers> <!-- mirrors
| This is a list of mirrors to be used in downloading artifacts from remote repositories.
|
| It works like this: a POM may declare a repository to use in resolving certain artifacts.
| However, this repository may have problems with heavy traffic at times, so people have mirrored
| it to several places.
|
| That repository definition will have a unique id, so we can create a mirror reference for that
| repository, to be used as an alternate download site. The mirror site will be the preferred
| server for that repository.
|-->
<mirrors>
<!-- mirror
| Specifies a repository mirror site to use instead of a given repository. The repository that
| this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
| for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
|
<mirror>
<id>mirrorId</id>
<mirrorOf>repositoryId</mirrorOf>
<name>Human Readable Name for this Mirror.</name>
<url>http://my.repository.com/repo/path</url>
</mirror>
-->
<mirror>
<id>alimaven</id>
<mirrorOf>central</mirrorOf>
<name>aliyun maven</name>
<url>http://maven.aliyun.com/nexus/content/groups/public/</url>
</mirror>
</mirrors> <!-- profiles
| This is a list of profiles which can be activated in a variety of ways, and which can modify
| the build process. Profiles provided in the settings.xml are intended to provide local machine-
| specific paths and repository locations which allow the build to work in the local environment.
|
| For example, if you have an integration testing plugin - like cactus - that needs to know where
| your Tomcat instance is installed, you can provide a variable here such that the variable is
| dereferenced during the build process to configure the cactus plugin.
|
| As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
| section of this document (settings.xml) - will be discussed later. Another way essentially
| relies on the detection of a system property, either matching a particular value for the property,
| or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
| value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
| Finally, the list of active profiles can be specified directly from the command line.
|
| NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
| repositories, plugin repositories, and free-form properties to be used as configuration
| variables for plugins in the POM.
|
|-->
<profiles>
<!-- profile
| Specifies a set of introductions to the build process, to be activated using one or more of the
| mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
| or the command line, profiles have to have an ID that is unique.
|
| An encouraged best practice for profile identification is to use a consistent naming convention
| for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
| This will make it more intuitive to understand what the set of introduced profiles is attempting
| to accomplish, particularly when you only have a list of profile id's for debug.
|
| This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
<profile>
<id>jdk-1.4</id> <activation>
<jdk>1.4</jdk>
</activation> <repositories>
<repository>
<id>jdk14</id>
<name>Repository for JDK 1.4 builds</name>
<url>http://www.myhost.com/maven/jdk14</url>
<layout>default</layout>
<snapshotPolicy>always</snapshotPolicy>
</repository>
</repositories>
</profile>
--> <!--
| Here is another profile, activated by the system property 'target-env' with a value of 'dev',
| which provides a specific path to the Tomcat instance. To use this, your plugin configuration
| might hypothetically look like:
|
| ...
| <plugin>
| <groupId>org.myco.myplugins</groupId>
| <artifactId>myplugin</artifactId>
|
| <configuration>
| <tomcatLocation>${tomcatPath}</tomcatLocation>
| </configuration>
| </plugin>
| ...
|
| NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
| anything, you could just leave off the <value/> inside the activation-property.
|
<profile>
<id>env-dev</id> <activation>
<property>
<name>target-env</name>
<value>dev</value>
</property>
</activation> <properties>
<tomcatPath>/path/to/tomcat/instance</tomcatPath>
</properties>
</profile>
-->
</profiles> <!-- activeProfiles
| List of profiles that are active for all builds.
|
<activeProfiles>
<activeProfile>alwaysActiveProfile</activeProfile>
<activeProfile>anotherAlwaysActiveProfile</activeProfile>
</activeProfiles>
-->
</settings>
CentOS7.6安装Maven的更多相关文章
- linux(centos7)下安装maven
Linux下安装maven 1.首先到Maven官网下载安装文件,目前最新版本为3.0.3,下载文件为apache-maven-3.0.3-bin.tar.gz,下载可以使用yum命令: 2.进入下载 ...
- centos7下安装maven
步骤1:在home目录下解压apache-maven-3.5.0-bin.tar.gz安装包 [root@model ~]# -bin.tar.gz 步骤2:创建/maven目录并将解压后的文件夹移至 ...
- 转: linux centos7 下安装maven
转: https://www.tecmint.com/install-apache-maven-on-centos-7/
- centos7下安装配置jenkins+git+maven+jdk
环境 centos7 jdk1.8 maven3 git 在安装jenkins之前,先安装jdk1.8.maven.git 一. 安装jdk1.8 第一步:下载 jdk-8u131-linux-x64 ...
- Centos7安装maven详情以及配置
一.maven安装: 1.获取maven下载地址: 查询maven最新版本地址:https://maven.apache.org/download.cgi 当前最新版本为maven 3.6.3 ...
- centos 安装maven
1.环境: 操作系统:centos7 maven:apache-maven-3.3.9-bin.tar.gz 2.安装JDK(1.7) 3.安装maven mkdir -p /opt/usr/loca ...
- 三、安装cmake,安装resin ,tars服务,mysql 安装介绍,安装jdk,安装maven,c++ 开发环境安装
三.安装cmake,安装resin 2018年07月01日 21:32:05 youz1976 阅读数:308 开发环境说明: centos7.2 ,最低配置:1核cpu,2G内存,1M带宽 1. ...
- Linux下安装maven(mvn命令)
Maven(mvn)是基于项目对象模型(POM project object model),可以通过一小段描述信息(配置)来管理项目的构建,报告和文档的软件项目管理工具(百度百科) 简单理解为一个打包 ...
- CentOS7 Hive 安装
hive的安装模式有2种,一种是使用自带的derby数据库,另一种是使用mysql作为元数据库.derby方式一般没人用,因为它是单用户模式.这里主要讲解mysql方式. hive仅仅是一个客户端工具 ...
随机推荐
- 【剑指offer】第一个只出现一次的字符
原创博文,转载请注明出处!本题牛客网地址 博客文章索引地址 博客文章中代码的github地址 1.题目 2.思路 空间换时间.建立一个哈希表,第一次扫描字符串时,统计每个字符的出现次数.第二次扫描字符 ...
- MySQL中表的复制
1.语法 create table 表名 select .. from 表名 where 条件; 2.示例 1.复制MOSHOU.sanguo表的全部记录和字段,sanguo2 create tabl ...
- 百度的富文本编辑器UEDITOR
还是百度的ueditor 比较好用,文件导入后,基本不用配置就可以直接使用图片,文件上传等功能. CKeditor要注意的地方太多了 .但是相对ckeditor 样式比较好看.
- BZOJ4547 Hdu5171 小奇的集合 【矩阵快速幂优化递推】
BZOJ4547 Hdu5171 小奇的集合 Description 有一个大小为n的可重集S,小奇每次操作可以加入一个数a+b(a,b均属于S),求k次操作后它可获得的S的和的最大值.(数据保证这个 ...
- LOJ2613 NOIP2013 华容道 【最短路】*
LOJ2613 NOIP2013 华容道 LINK 这是个好题,具体题意比较麻烦可以直接看LINK中的链接 然后考虑我们可能的移动方式 首先我们需要把白块移动到需要移动块S的附近(附近四格) 然后我们 ...
- 关于Mybatis将查询结果中添加常量列并返回
引言 在使用mybatis的时候,查询一个集合返回给前台页面,在有的时候,我们会添加一个常量字段到对象或者集合中,来标识这个对象属于的类型等等情况,当前台进行再次请求的时候携带此变量进行请求. 但是: ...
- C++ set容器
STL中的set容器的一点总结:(元素唯一,且排序) 1.关于set (头文件:<set>) C++ STL 之所以得到广泛的赞誉,也被很多人使用,不只是提供了像vector, strin ...
- MySQL中大数字加减,不产生千位符和科学计数
mysql数字加减科学计数法 这两天因为需求,需要获取一张表的流水号.规则是这样的.当前日期+8位流水号.比如:2015062400000001,2015062400000002,2015062400 ...
- notepad++运行paython程序
cmd /k C:\Python30\python.exe "$(FULL_CURRENT_PATH)" & PAUSE & EXIT 添加引用的环境变量
- arm_linux QT+v4l 显示视频
1.参考(原创)基于ZedBoard的Webcam设计(三):视频的采集和动态显示 下载代码实测可用. 2.重新下载了csdn的代码,缺widget.h文件,后重新生成widget工程(自动产生wid ...