|
Linux下JAVA命令（1.7.0_79）
|
|
命令
|
详解
|
参数列表
|
示例
|
重要程度
|
资料
|
|
appletviewer
|
Java applet 浏览器。appletviewer 命令可在脱离万维网浏览器环境的情况下运行 applet。
|
Usage: appletviewer <options> url(s)
where <options> include:
-debug Start the applet viewer in
the Java debugger
-encoding <encoding> Specify character encoding used by HTML
files
-J<runtime flag> Pass argument to the java interpreter
The -J option is non-standard and subject to change without notice.
|
appletviewer d:\test.html
或者
appletviewer HelloApplet.java
|
低
|
http://lavasoft.blog.51cto.com/62575/112594
|
|
idlj
|
生产映射到OMG IDL接口可以使Java应用程序使用CORBA的.java文件
|
com.sun.tools.corba.se.idl.InvalidArgument:
No IDL file was specified.
Compiler Usage:
java
com.sun.tools.corba.se.idl.toJavaPortable.Compile [options] <idl file>
where <idl file> is the name of a file containing IDL definitions, and
[options] is any combination of the options listed below. The options
are optional and may appear in any order; <idl file> is required and
must appear last.
Options:
-d <symbol> This is
equivalent to the following line in an
IDL
file: #define <symbol>
-emitAll Emit all
types, including those found in #included files.
-f<side> Define
what bindings to emit. <side> is
one of client,
server, all,
serverTIE, allTIE. serverTIE and
allTIE
cause
delegate model skeletons to be emitted.
If this
flag is not
used, -fclient is assumed.
-i <include path> By
default, the current directory is scanned for
included
files. This option adds another
directory.
-keep If a file to
be generated already exists, do not
overwrite it. By default it is overwritten.
-noWarn Suppress
warnings.
-oldImplBase Generate
skeletons compatible with old (pre-1.4) JDK ORBs.B4
-pkgPrefix <t> <prefix>
When the type or module name <t> is encountered at
file scope, begin
the Java package name for all files
generated for
<t> with <prefix>.
-pkgTranslate <t> <pkg>
When the type or module name <t> in encountered, replace
it with <pkg>
in the generated java package. Note
that
pkgPrefix
changes are made first. <t> must
match the
full package
name exactly. Also, <t> must not
be
org, org.omg,
or any subpackage of org.omg.
-skeletonName <xxx%yyy> Name
the skeleton according to the pattern.
The defaults
are:
%POA for the
POA base class (-fserver or -fall)
_%ImplBase
for the oldImplBase base class
(-oldImplBase
and (-fserver or -fall)).
-td <dir> use
<dir> for the output directory instead of
the current
directory.
-tieName <xxx%yyy> Name
the tie according to the pattern. The
defaults are:
%POATie for
the POA tie (-fserverTie or -fallTie)
%_Tie for the
oldImplBase tie
(-oldImplBase
and (-fserverTie or -fallTie)).
-v, -verbose Verbose mode.
-version Display the
version number and quit.
|
idlj -fclient My.idl
或者
idlj -fserver My.idl
或者
idlj -fclient -fserver My.idl
|
低
|
http://docs.oracle.com/javase/7/docs/technotes/tools/share/idlj.html
|
|
javac
|
javac 是java语言编程编译器。全称javacompilation.javac工具读由java语言编写的类和接口的定义，并将它们编译成字节代码的class文件。javac 可以隐式编译一些没有在命令行中提及的源文件。用 -verbose 选项可跟踪自动编译
|
Usage: javac <options> <source
files>
where possible options include:
-g Generate all
debugging info
-g:none Generate no debugging
info
-g:{lines,vars,source} Generate only some debugging info
-nowarn Generate no warnings
-verbose Output messages about what
the compiler is doing
-deprecation Output source locations where
deprecated APIs are used
-classpath <path> Specify where to find user class
files and annotation processors
-cp <path> Specify where to find user
class files and annotation processors
-sourcepath <path> Specify where to find input source
files
-bootclasspath <path> Override location of bootstrap class
files
-extdirs <dirs> Override location of installed
extensions
-endorseddirs <dirs> Override location of endorsed
standards path
-proc:{none,only} Control whether annotation
processing and/or compilation is done.
-processor
<class1>[,<class2>,<class3>...] Names of the annotation
processors to run; bypasses default discovery process
-processorpath <path> Specify where to find annotation
processors
-d <directory> Specify where to place generated
class files
-s <directory> Specify where to place generated
source files
-implicit:{none,class} Specify whether or not to generate class
files for implicitly referenced files
-encoding <encoding> Specify character encoding used by
source files
-source <release> Provide source compatibility with
specified release
-target <release> Generate class files for specific
VM version
-version Version information
-help Print a synopsis of
standard options
-Akey[=value] Options to pass to annotation
processors
-X Print a synopsis of
nonstandard options
-J<flag> Pass <flag> directly
to the runtime system
-Werror Terminate compilation if
warnings occur
@<filename> Read options and filenames
from file
|
java -d d:\class *.java
|
高
|
http://baike.baidu.com/item/javac?sefr=enterbtn
http://lavasoft.blog.51cto.com/62575/112312/
|
|
javap
|
反汇编指定的Java字节码文件
|
Usage: javap <options>
<classes>
where possible options include:
-help
--help -? Print this usage message
-version Version information
-v
-verbose Print
additional information
-l
Print line
number and local variable tables
-public Show only public classes
and members
-protected Show protected/public classes
and members
-package Show
package/protected/public classes
and members
(default)
-p
-private Show all
classes and members
-c Disassemble the code
-s Print internal type
signatures
-sysinfo Show system info (path,
size, date, MD5 hash)
of class
being processed
-constants Show static final constants
-classpath <path> Specify where to find user class
files
-bootclasspath <path> Override location of bootstrap class
files
|
javap Person（Person为字节码文件）
或者
javap -public Person
或者
javap -public -l Person
|
低
|
http://www.365mini.com/page/javap-disassemble-class-file-code.htm
|
|
jconsole
|
内置 Java 性能分析器，可以从命令行或在 GUI shell 中运行。您可以轻松地使用 JConsole（或者，它更高端的
“近亲” VisualVM ）来监控 Java 应用程序性能和跟踪 Java 中的代码
|
|
jconsle
配置需要连接的IP和端口
|
高
|
http://jiajun.iteye.com/blog/810150
|
|
jinfo
|
输出JAVA系统参数及命令行参数
|
Usage:
jinfo [option] <pid>
(to connect to running process)
jinfo [option] <executable
<core>
(to connect to a core file)
jinfo [option]
[server_id@]<remote server IP or hostname>
(to connect to remote debug
server)
where <option> is one of:
-flag <name> to print the value of the named VM
flag
-flag [+|-]<name> to enable or disable the named VM flag
-flag <name>=<value> to
set the named VM flag to the given value
-flags to print VM flags
-sysprops to print
Java system properties
<no option> to print both of the above
-h | -help to print this help message
|
jinfo pid
或者
jinfo -flag MaxPermSize 2176
|
中
|
http://www.softown.cn/post/182.html
|
|
jps
|
显示Java进程的状态信息
|
usage: jps [-help]
jps [-q] [-mlvV]
[<hostid>]
Definitions:
<hostid>: <hostname>[:<port>]
|
jps
或者
jps -v
|
中
|
http://www.softown.cn/post/184.html
|
|
jstat
|
Java虚拟机的统计监测工具，主要用于显示JVM的性能统计性能
|
Usage: jstat -help|-options
jstat -<option> [-t]
[-h<lines>] <vmid> [<interval> [<count>]]
Definitions:
<option> An option reported by the -options
option
<vmid> Virtual Machine Identifier. A vmid
takes the following form:
<lvmid>[@<hostname>[:<port>]]
Where <lvmid> is
the local vm identifier for the target
Java virtual machine,
typically a process id; <hostname> is
the name of the host
running the target Java virtual machine;
and <port> is the
port number for the rmiregistry on the
target host. See the
jvmstat documentation for a more complete
description of the
Virtual Machine Identifier.
<lines> Number of samples between header
lines.
<interval> Sampling interval. The following forms
are allowed:
<n>["ms"|"s"]
Where <n> is an
integer and the suffix specifies the units as
milliseconds("ms") or seconds("s"). The default
units are "ms".
<count> Number of samples to take before
terminating.
-J<flag> Pass <flag> directly to the
runtime system.
|
jstat -gcoldcapacity -t 2176 250 3
或者
jstat -gcutil 40496@remote.domain 1000
|
中
|
http://www.softown.cn/post/187.html
|
|
native2ascii
|
文件转码工具，是将特殊各异的内容 转为 用指定的编码标准文体形式统一的表现出来
|
SYNOPSIS
native2ascii [options]
[inputfile [outputfile]]
DESCRIPTION
native2ascii converts files that
are encoded to any character encoding that is supported by the Java runtime
environment to
files encoded in ASCII, using Unicode escapes
("\uxxxx" notation) for all characters that are not part of the
ASCII charac-
ter set. This process is
required for properties files containing characters not in ISO-8859-1
character sets. The tool can
also perform the reverse
conversion.
If outputfile is omitted, standard output is
used for output. If, in addition, inputfile is omitted, standard input is
used
for input.
OPTIONS
-reverse
Perform the reverse
operation: Convert a file encoded in ISO-8859-1 with Unicode escapes to a
file in any
character
encoding supported by the
Java runtime environment.
-encoding encoding_name
Specifies the
name of the character encoding
to be used by the conversion procedure. If this option is not present,
the default character
encoding (as determined by the
java.nio.charset.Charset.defaultCharset method)
is used. The
encoding_name string must be the name of a character
encoding that is supported by the Java runtime environment - see
the Supported Encodings @
http://docs.oracle.com/javase/7/docs/technotes/guides/intl/encoding.doc.html
document.
-Joption
Pass option to the Java
virtual machine, where option is one of the options described on the
reference page for the
java(1). For example, -J-Xms48m
sets the startup memory to 48 megabytes.
|
native2ascii -encoding GBK
D:\src\resources.properties D:\classes\resources.properties
或者
native2ascii -reverse allMessages_zh_CN.properties allMessages_zh_CN.txt
|
低
|
http://blog.csdn.net/flm_0722/article/details/5159988
|
|
rmic
|
java rmi编译器
为远程对象生成 stub 和 skeleton
|
Usage: rmic <options> <class
names>
where <options> includes:
-keep Do not delete intermediate
generated source files
-keepgenerated (same as
"-keep")
-v1.1 Create stubs/skeletons for 1.1 stub
protocol version
-vcompat Create stubs/skeletons compatible with
both
1.1 and 1.2
stub protocol versions
-v1.2 (default) Create stubs for 1.2 stub
protocol version only
-iiop Create stubs for IIOP. When
present, <options> also includes:
-always Create stubs even when they appear
current
-alwaysgenerate (same as "-always")
-nolocalstubs Do not create stubs optimized for same
process
-idl Create IDL. When present,
<options> also includes:
-noValueMethods Do not generate methods for valuetypes
-always Create IDL even when it appears
current
-alwaysgenerate (same as "-always")
-g Generate debugging info
-nowarn Generate no warnings
-nowrite Do not write compiled classes to the
file system
-verbose Output messages about what the
compiler is doing
-classpath <path> Specify where to find input class files
-bootclasspath <path> Override location of bootstrap class files
-extdirs <path> Override location of installed
extensions
-d <directory> Specify where to place generated
class files
-J<runtime flag> Pass argument to the java interpreter
|
rmic
-d C:\java\classes foo.MyClass
|
低
|
http://docs.oracle.com/javase/7/docs/technotes/tools/windows/rmic.html
http://blog.sina.com.cn/s/blog_553a9295010005n3.html
|
|
serialver
|
查看java序列化类的ID
|
use: serialver [-classpath classpath]
[-show] [classname...]
|
serialver -show
或者
serialver Test(类名）
|
低
|
http://blog.csdn.net/itfootball/article/details/38458221
|
|
wsgen
|
根据实现了@WebService注释的类生成所有用于发布Web Service所依赖的源代码文件和经过编译过的二进制类文件
|
Missing SEI
Usage: WSGEN [options] <SEI>
where [options] include:
-classpath <path> specify where to find input class
files
-cp <path> same as -classpath
<path>
-d <directory> specify where to place generated
output files
-extension allow vendor extensions -
functionality not specified
by the
specification. Use of extensions may
result in
applications that are not portable or
may not
interoperate with other implementations
-help display help
-keep keep generated files
-r <directory> resource destination directory,
specify where to
place
resouce files such as WSDLs
-s <directory> specify where to place generated
source files
-verbose output messages about what
the compiler is doing
-version print version information
-wsdl[:protocol] generate a WSDL file. The protocol
is optional.
Valid
protocols are [soap1.1, Xsoap1.2],
the
default is soap1.1.
The non stanadard
protocols [Xsoap1.2]
can only
be used in conjunction with the
-extension
option.
-inlineSchemas inline schemas in the generated
wsdl. Must be
used in
conjunction with the -wsdl option.
-servicename <name> specify the Service name to use in
the generated WSDL
Used in
conjunction with the -wsdl option.
-portname <name> specify the Port name to use in the
generated WSDL
Used in
conjunction with the -wsdl option.
Examples:
wsgen -cp . example.Stock
wsgen -cp . example.Stock -wsdl
-servicename {http://mynamespace}MyService
|
wsgen -cp . example.Stock
或者
wsgen -cp . example.Stock -wsdl -servicename {http://mynamespace}MyService
|
低
|
http://liuna718-163-com.iteye.com/blog/1669058
http://michael-paul.iteye.com/blog/899656
|
|
apt
|
处理注释的工具,它对源代码文件进行检测找出其中的Annotation，使用Annotation进行额外的处理
|
warning: The apt tool and its associated
API are planned to be
removed in the next major JDK release.
These features have been
superseded by javac and the standardized annotation processing API,
javax.annotation.processing and javax.lang.model. Users are
recommended to migrate to the annotation processing features of
javac; see the javac man page for more information.
Usage: apt <apt and javac options> <source files>
where apt options include:
-classpath <path> Specify where to find user class
files and annotation processor factories
-cp <path> Specify where to find user
class files and annotation processor factories
-d <path> Specify where to place
processor and javac generated class files
-s <path> Specify where to place processor generated
source files
-source <release> Provide source compatibility with
specified release
-version Version information
-help Print a synopsis of
standard options; use javac -help for more options
-X Print a synopsis of
nonstandard options
-J<flag> Pass <flag> directly
to the runtime system
-A[key[=value]] Options to pass to annotation
processors
-nocompile Do not compile source files
to class files
-print Print out textual
representation of specified types
-factorypath <path> Specify where to find annotation
processor factories
-factory <class> Name of AnnotationProcessorFactory
to use; bypasses default discovery process
See javac -help for information on javac options.
|
apt -factory HibernateAnnotationFactory
Person.java
|
低
|
http://www.javacui.com/Theory/367.html
|
|
jar
|
将写好的JAVA程序打包，或者解压程序包
|
Usage: jar {ctxui}[vfmn0PMe] [jar-file]
[manifest-file] [entry-point] [-C dir] files ...
Options:
-c
create new archive
-t
list table of contents for archive
-x
extract named (or all) files from archive
-u
update existing archive
-v
generate verbose output on standard output
-f
specify archive file name
-m
include manifest information from specified manifest file
-e
specify application entry point for stand-alone application
bundled into an executable jar
file
-0
store only; use no ZIP compression
-P
preserve leading '/' (absolute path) and ".." (parent
directory) components from file names
-M
do not create a manifest file for the entries
-i
generate index information for the specified jar files
-C change to the specified
directory and include the following file
If any file is a directory then it is processed recursively.
The manifest file name, the archive file name and the entry point name are
specified in the same order as the 'm', 'f' and 'e' flags.
Example 1: to archive two class files into an archive called classes.jar:
jar cvf classes.jar Foo.class
Bar.class
Example 2: use an existing manifest file 'mymanifest' and archive all the
files in the foo/ directory
into 'classes.jar':
jar cvfm classes.jar mymanifest
-C foo/ .
|
jar
cf hello.jar hello
或者
jar cvf classes.jar Foo.class Bar.class
或者
jar cvfm classes.jar mymanifest -C
foo/ .
|
中
|
http://blog.csdn.net/dingxingmei/article/details/39290151
|
|
javadoc
|
从程序源代码中抽取类、方法、成员等注释形成一个和源代码配套的API帮助文档
|
javadoc: error - No packages or classes
specified.
usage: javadoc [options] [packagenames] [sourcefiles] [@files]
-overview <file> Read
overview documentation from HTML file
-public Show only
public classes and members
-protected Show
protected/public classes and members (default)
-package Show
package/protected/public classes and members
-private Show all
classes and members
-help Display
command line options and exit
-doclet <class>
Generate output via alternate doclet
-docletpath <path> Specify
where to find doclet class files
-sourcepath <pathlist> Specify
where to find source files
-classpath <pathlist> Specify
where to find user class files
-exclude <pkglist> Specify
a list of packages to exclude
-subpackages <subpkglist> Specify subpackages to recursively load
-breakiterator Compute 1st sentence with
BreakIterator
-bootclasspath <pathlist> Override location of class files loaded
by the bootstrap class loader
-source <release> Provide
source compatibility with specified release
-extdirs <dirlist> Override
location of installed extensions
-verbose Output
messages about what Javadoc is doing
-locale <name> Locale
to be used, e.g. en_US or en_US_WIN
-encoding <name> Source
file encoding name
-quiet Do not display status messages
-J<flag> Pass
<flag> directly to the runtime system
-X Print a
synopsis of nonstandard options
Provided by Standard doclet:
-d <directory>
Destination directory for output files
-use
Create class and package usage pages
-version
Include @version paragraphs
-author
Include @author paragraphs
-docfilessubdirs
Recursively copy doc-file subdirectories
-splitindex Split
index into one file per letter
-windowtitle <text>
Browser window title for the documenation
-doctitle <html-code>
Include title for the overview page
-header <html-code>
Include header text for each page
-footer <html-code>
Include footer text for each page
-top <html-code> Include top text for each page
-bottom <html-code>
Include bottom text for each page
-link <url>
Create links to javadoc output at <url>
-linkoffline <url> <url2>
Link to docs at <url> using package list at <url2>
-excludedocfilessubdir <name1>:.. Exclude any doc-files subdirectories
with given name.
-group <name> <p1>:<p2>.. Group specified packages together in
overview page
-nocomment
Supress description and tags, generate only declarations.
-nodeprecated Do
not include @deprecated information
-noqualifier <name1>:<name2>:...
Exclude the list of qualifiers from the output.
-nosince Do
not include @since information
-notimestamp Do
not include hidden time stamp
-nodeprecatedlist Do
not generate deprecated list
-notree Do
not generate class hierarchy
-noindex Do
not generate index
-nohelp Do
not generate help link
-nonavbar Do
not generate navigation bar
-serialwarn
Generate warning about @serial tag
-tag <name>:<locations>:<header> Specify single argument custom tags
-taglet The
fully qualified name of Taglet to register
-tagletpath The path to Taglets
-Xdocrootparent <url>
Replaces all appearances of @docRoot followed by /.. in doc comments
with <url>
-charset <charset>
Charset for cross-platform viewing of generated documentation.
-helpfile <file> Include file that help link links
to
-linksource
Generate source in HTML
-sourcetab <tab length>
Specify the number of spaces each tab takes up in the source
-keywords
Include HTML meta tags with package, class and member info
-stylesheetfile <path>
File to change style of the generated documentation
-docencoding <name>
Output encoding name
1 error
|
javadoc fancy\Test.java fancy\Editor.java
fancy\editor\ECommand.java fancy\editor\EDocument.java
fancy\editor\EView.java
javadoc -d 文档存放目录 -author -version
源文件名.java
|
低
|
http://baike.baidu.com/item/javadoc?sefr=enterbtn
http://jingyan.baidu.com/article/597a0643485c11312b5243c7.html
|
|
jcontrol
|
远程调试
|
usage: ControlPanel [ (-u scheme | -r
scheme) -c cpath -j jrepath ]
|
jcontrol
Linux GUI的界面下
|
低
|
http://docs.oracle.com/javase/7/docs/technotes/guides/jweb/jcp/jcp.html
http://blog.csdn.net/uestc_lxp/article/details/44983835
|
|
jmap
|
输出所有内存中对象的工具，甚至可以将VM 中的heap，以二进制输出成文本。打印出某个Java进程（使用pid）内存内的，所有‘对象’的情况
|
Usage:
jmap [option] <pid>
(to connect to running process)
jmap [option] <executable
<core>
(to connect to a core file)
jmap [option]
[server_id@]<remote server IP or hostname>
(to connect to remote debug
server)
where <option> is one of:
<none> to print same info as Solaris
pmap
-heap to print java heap summary
-histo[:live] to print histogram of java object
heap; if the "live"
suboption is specified, only
count live objects
-permstat to print permanent generation
statistics
-finalizerinfo to print information on objects
awaiting finalization
-dump:<dump-options> to dump
java heap in hprof binary format
dump-options:
live dump only live objects; if not
specified,
all objects in the heap are dumped.
format=b binary format
file=<file> dump heap to
<file>
Example: jmap
-dump:live,format=b,file=heap.bin <pid>
-F force. Use with
-dump:<dump-options> <pid> or -histo
to force a
heap dump or histogram when <pid> does not
respond. The
"live" suboption is not supported
in this mode.
-h | -help to print this help message
-J<flag> to pass <flag> directly to
the runtime system
|
jmap
2176
或者
jmap -J-d64 -heap 2176
或者
jmap -histo 2176
|
中
|
http://developer.51cto.com/art/201203/321422.htm
http://blog.csdn.net/zhaozheng7758/article/details/8623530
|
|
jrunscript
|
命令行脚本外壳。jrunscript支持交互模式(read-eval-print)和批处理模式(-f选项)的脚本执行。这是一个脚本语言的独立外壳。默认情况下，使用JavaScript，但是我们可以使用-l选项来指定不同的语言。通过Java与脚本语言的通讯
|
Usage: jrunscript [options] [arguments...]
where [options] include:
-classpath <path> Specify where to find user class files
-cp <path> Specify where to find user class
files
-D<name>=<value> Set a system property
-J<flag> Pass <flag> directly to
the runtime system
-l <language> Use specified scripting language
-e <script> Evaluate given script
-encoding <encoding> Specify
character encoding used by script files
-f <script file> Evaluate given script file
-f - Interactive mode, read
script from standard input
If this is used, this should be
the last -f option
-help Print this usage message and
exit
-? Print this usage message
and exit
-q List all scripting engines
available and exit
If [arguments..] are present and if no -e or -f option is used, then first
argument is script file and the rest of the arguments, if any, are passed
as script arguments. If [arguments..] and -e or -f option is used, then all
[arguments..] are passed as script arguments. If [arguments..], -e, -f are
missing, then interactive mode is used.
|
jrunscript
或者
jrunscript -e "println('hello world')"
|
低
|
http://www.javacui.com/Theory/374.html
|
|
jstatd
|
基于RMI（Remove
Method Invocation）的服务程序，它用于监控基于HotSpot的JVM中资源的创建及销毁，并且提供了一个远程接口允许远程的监控工具连接到本地的JVM执行命令
|
usage: jstatd [-nr] [-p port] [-n rminame]
|
jstatd
-J-Djava.security.policy=jstatd.all.policy
或者
jstatd -J-Djava.security.policy=all.policy -nr
|
低
|
http://blog.csdn.net/fenglibing/article/details/17323515
|
|
orbd
|
用来使客户能够透明地查找和调用持久对象在服务器上应用环境
|
|
orbd
|
低
|
http://www.cnblogs.com/java-pan/archive/2012/07/08/corba.html
|
|
rmid
|
可执行程序，用于启动系统激活进程，以便能够在 Java 虚拟机上注册和激活对象。 rmid的出现是为了解决分布式处理的性能问题
|
rmid: illegal option: --help
Usage: rmid <options>
where <options> include:
-port <port> Specify port for rmid to use
-log <directory> Specify directory in which rmid writes
log
-stop Stop current invocation of
rmid (for specified port)
-C<runtime flag> Pass argument to each child process
(activation group)
-J<runtime flag> Pass argument to the java interpreter
|
rmid
-J-Djava.security.policy=%LOCATION%/test.policy -port 1099
|
低
|
http://blog.csdn.net/dongtg/article/details/1752723
http://docs.oracle.com/javase/8/docs/technotes/tools/windows/rmid.html
|
|
servertool
|
|
|
servertool
|
低
|
http://docs.oracle.com/javase/1.5.0/docs/guide/idl/servertool.html
|
|
wsimport
|
依据wsdl文件生成相应的类文件，然后用这些类文件，就可以像调用本地的类一样调用WebService提供的方
|
Usage:
wsimport [options] <WSDL_URI>
where [options] include:
-b <path> specify jaxws/jaxb binding
files or additional schemas
(Each
<path> must have its own -b)
-B<jaxbOption> Pass this option to JAXB schema
compiler
-catalog <file> specify catalog file to resolve
external entity references
supports
TR9401, XCatalog, and OASIS XML Catalog format.
-d <directory> specify where to place generated
output files
-extension allow vendor extensions -
functionality not specified
by the
specification. Use of extensions may
result in
applications that are not portable or
may not
interoperate with other implementations
-help display help
-httpproxy:<host>:<port>
specify a HTTP proxy server (port defaults to 8080)
-keep keep generated files
-p <pkg> specifies the target
package
-quiet suppress wsimport output
-s <directory> specify where to place generated
source files
-target <version> generate code as per the given JAXWS
spec version
Defaults to
2.2, Accepted values are 2.0, 2.1 and 2.2
e.g. 2.0
will generate compliant code for JAXWS 2.0 spec
-verbose output messages about what
the compiler is doing
-version print version information
-wsdllocation <location> @WebServiceClient.wsdlLocation value
-clientjar <jarfile> Creates the jar file of the generated
artifacts along with the
WSDL
metadata required for invoking the web service.
Extensions:
-XadditionalHeaders map headers not bound to
request or response message to
Java
method parameters
-Xauthfile file to carry
authorization information in the format
http://username:password@example.org/stock?wsdl
-Xdebug print debug
information
-Xno-addressing-databinding enable binding of W3C
EndpointReferenceType to Java
-Xnocompile do not compile
generated Java files
-XdisableSSLHostnameVerification
disable the SSL Hostname verification while fetching
wsdls
Examples:
wsimport stock.wsdl -b stock.xml -b
stock.xjb
wsimport -d generated
http://example.org/stock?wsdl
|
wsimport stock.wsdl -b stock.xml -b
stock.xjb
或者
wsimport -d generated http://example.org/stock?wsdl
|
中
|
http://www.cnblogs.com/ywjy/p/5196064.html
或者
http://blog.csdn.net/chow__zh/article/details/8237684
|
|
jarsigner
|
用证书文件对未签名的APK文件进行签名
|
Usage: jarsigner [options] jar-file alias
jarsigner -verify [options]
jar-file [alias...]
[-keystore <url>]
keystore location
[-storepass <password>]
password for keystore integrity
[-storetype <type>]
keystore type
[-keypass <password>]
password for private key (if different)
[-certchain <file>] name
of alternative certchain file
[-sigfile <file>] name
of .SF/.DSA file
[-signedjar <file>] name
of signed JAR file
[-digestalg <algorithm>] name
of digest algorithm
[-sigalg <algorithm>] name
of signature algorithm
[-verify] verify a
signed JAR file
[-verbose[:suboptions]] verbose
output when signing/verifying.
suboptions can be all, grouped or
summary
[-certs] display
certificates when verbose and verifying
[-tsa <url>]
location of the Timestamping Authority
[-tsacert <alias>]
public key certificate for Timestamping Authority
[-altsigner <class>] class
name of an alternative signing mechanism
[-altsignerpath <pathlist>] location of an alternative signing
mechanism
[-internalsf] include the
.SF file inside the signature block
[-sectionsonly] don't
compute hash of entire manifest
[-protected] keystore
has protected authentication path
[-providerName <name>]
provider name
[-providerClass <class> name
of cryptographic service provider's
[-providerArg <arg>]] ...
master class file and constructor argument
[-strict] treat
warnings as errors
|
jarsigner [选项] jar 文件别名
或者
jarsigner -verify [选项] jar 文件
|
低
|
http://blog.csdn.net/ygc87/article/details/7621037
|
|
javafxpackager
|
javafx提供的打包工具
|
Usage: javafxpackager -command [-options]
where command is one of:
-createjar
The packager produces jar
archive according to other parameters.
-deploy
The packager generates the
jnlp and html files according to other
parameters.
-createbss
Converts css file into binary
form
-signJar
Signs jar file(s) with a
provided certificate.
-makeall
Performs compilation,
createjar and deploy steps as one call with
most arguments predefined.
The sources must be located in "src"
folder, the resulting files
(jar, jnlp, html) are put in "dist"
folder. This command may be
configured only in a minimal way and is
as automated as possible.
Options for createjar command include:
-appclass <application class>
qualified name of the
application class to be executed.
-preloader <preloader class>
qualified name of the
preloader class to be executed.
-paramfile <file>
properties file with default
named application parameters.
-argument arg
An unnamed argument to be put
in <fx:argument> element in the JNLP
file.
-classpath <files>
list of dependent jar file
names.
-manifestAttrs <manifest
attributes>
List of additional manifest attributes.
Syntax: "name1=value1,
name2=value2,name3=value3.
-noembedlauncher
If present, the packager will
not add the JavaFX launcher classes
to the jarfile.
-nocss2bin
The packager won't convert
CSS files to binary form before copying
to jar.
-runtimeversion <version>
version of the required
JavaFX Runtime.
-outdir <dir>
name of the directory to
generate output file to.
-outfile <filename>
The name (without the
extension) of the resulting file.
-srcdir <dir>
Base dir of the files to
pack.
-srcfiles <files>
List of files in srcdir. If
omitted, all files in srcdir (which
is a mandatory argument in this
case) will be packed.
Options for deploy command include:
-title <title>
title of the application.
-vendor <vendor>
vendor of the application.
-description <description>
description of the
application.
-appclass <application class>
qualified name of the
application class to be executed.
-preloader <preloader class>
qualified name of the
preloader class to be executed.
-paramfile <file>
properties file with default
named application parameters.
-htmlparamfile <file>
properties file with
parameters for the resulting applet.
-width <width>
width of the application.
-height <height>
height of the application.
-native <type>
generate self-contained
application bundles (if possible).
If type is specified then
only bundle of this type is created.
List of supported types
includes: installer, image, exe, msi, dmg, rpm, deb.
-name <name>
name of the application.
-embedjnlp
If present, the jnlp file
will be embedded in the html document.
-embedCertificates
If present, the certificates
will be embedded in the jnlp file.
-allpermissions
If present, the application
will require all security permissions
in the jnlp file.
-updatemode <updatemode>
sets the update mode for the
jnlp file.
-isExtension
if present, the srcfiles are
treated as extensions.
-callbacks
specifies user callback
methods in generated HTML. The format is
"name1:value1,name2:value2,..."
-templateInFilename
name of the html template
file. Placeholders are in form of
#XXXX.YYYY(APPID)#
-templateOutFilename
name of the html file to write
the filled-in template to.
-templateId
Application ID of the
application for template processing.
-argument arg
An unnamed argument to be put
in <fx:argument> element in the JNLP
file.
-outdir <dir>
name of the directory to
generate output file to.
-outfile <filename>
The name (without the
extension) of the resulting file.
-srcdir <dir>
Base dir of the files to
pack.
-srcfiles <files>
List of files in srcdir. If
omitted, all files in srcdir (which
is a mandatory argument in
this case) will be used.
Options for createbss command include:
-outdir <dir>
name of the directory to
generate output file to.
-srcdir <dir>
Base dir of the files to
pack.
-srcfiles <files>
List of files in srcdir. If
omitted, all files in srcdir (which
is a mandatory argument in
this case) will be used.
Options for signJar command include:
-keyStore <file>
Keystore filename.
-alias
Alias for the key.
-storePass
Password to check integrity
of the keystore or unlock the keystore.
-keyPass
Password for recovering the
key.
-storeType
Keystore type, the default
value is "jks".
-outdir <dir>
name of the directory to
generate output file(s) to.
-srcdir <dir>
Base dir of the files to
signed.
-srcfiles <files>
List of files in srcdir. If
omitted, all files in srcdir (which
is a mandatory argument in this
case) will be signed.
Options for makeAll command include:
-appclass <application class>
qualified name of the
application class to be executed.
-preloader <preloader class>
qualified name of the
preloader class to be executed.
-classpath <files>
list of dependent jar file
names.
-name <name>
name of the application.
-width <width>
width of the application.
-height <height>
height of the application.
-v enable verbose output.
Sample usages:
--------------
javafxpackager -createjar -appclass package.ClassName
-srcdir classes -outdir out -outfile
outjar -v
Packages the content of the
classes directory to outjar.jar,
sets the application class to
package.ClassName.
javafxpackager -deploy -outdir outdir -outfile outfile -width 34 -height 43
-name AppName -appclass
package.ClassName -v -srcdir compiled
Generates outfile.jnlp and
corresponding outfile.html files in
outdir for aplication AppName
that is started by package.ClassName
class and has dimensions of
34x43.
javafxpackager -makeall -appclass brickbreaker.Main -name BrickBreaker
-width 600 -height 600
This command does all the
packaging work including compilation:
compile, createjar, deploy.
|
javafxpackager -deploy -appclass Test
-native image -srcdir archive -outdir deploy -outfile Test
|
低
|
http://www.th7.cn/Program/java/201602/761531.shtml
http://www.codeweblog.com/javafx%E6%89%93%E5%8C%85%E5%B7%A5%E5%85%B7-javafxpackager/
|
|
javaws
|
Java Web Start的简写。Java Web Start 是一个Java软件，主要用于管理Java应用程序，例如在线下载、安装、运行、更新
|
Java(TM)
Web Start 10.79.2.15-fcs
Usage: javaws [run-options] <jnlp-file>
javaws [control-options]
where run-options include:
-verbose display additional output
-offline run the application in offline mode
-system run the application from the system
cache only
-Xnosplash run without showing a splash screen
-J<option> supply option to the vm
-wait start java process and wait for its
exit
control-options include:
-viewer show the cache viewer in the java
control panel
-clearcache remove all non-installed applications
from the cache
-uninstall remove all applications from the cache
-uninstall <jnlp-file> remove the application from
the cache
-import [import-options]
<jnlp-file> import the application to the cache
import-options include:
-silent import silently (with no user
interface)
-system import application into the system
cache
-codebase <url> retrieve
resources from the given codebase
-shortcut install shortcuts as if user allowed
prompt
-association install associations as if user allowed
prompt
|
javaws 应用程序jnlp文件的URL
|
低
|
http://www.softown.cn/post/177.html
|
|
jdb
|
基于文本和命令行的调试工具
|
invalid option: --help
Usage: jdb <options> <class> <arguments>
where options include:
-help print out this message and exit
-sourcepath <directories
separated by ":">
directories in
which to look for source files
-attach <address>
attach to a
running VM at the specified address using standard connector
-listen <address>
wait for a
running VM to connect at the specified address using standard connector
-listenany
wait for a
running VM to connect at any available address using standard connector
-launch
launch VM
immediately instead of waiting for 'run' command
-listconnectors list the connectors available in this VM
-connect
<connector-name>:<name1>=<value1>,...
connect to target
VM using named connector with listed argument values
-dbgtrace [flags] print info for
debugging jdb
-tclient run the application in the
HotSpot(TM) Client Compiler
-tserver run the application in the
HotSpot(TM) Server Compiler
options forwarded to debuggee process:
-v -verbose[:class|gc|jni]
turn on verbose mode
-D<name>=<value> set a system property
-classpath <directories
separated by ":">
list directories
in which to look for classes
-X<option> non-standard target VM option
<class> is the name of the class to begin debugging
<arguments> are the arguments passed to the main() method of
<class>
For command help type 'help' at jdb prompt
|
jdb
|
低
|
http://blog.csdn.net/arkblue/article/details/39718947
|
|
jmc
|
图形界面监控工具
|
|
jmc
|
中
|
http://www.mspring.org/article/1229
http://blog.csdn.net/simonchi/article/details/52922887
|
|
jsadebugd
|
服务能力代理调试程序
连接到一个 Java 进程或一个核心文件，并充当一个调试服务器
|
Usage: jsadebugd [options] <pid> [server-id]
(to connect to a live java process)
or
jsadebugd [options] <executable> <core> [server-id]
(to connect to a core file produced
by <executable>)
server-id is an optional unique id
for this debug server, needed
if multiple debug servers are run on
the same machine
where options include:
-h | -help to print this help
message
|
jsadebugd 2176(pid)
|
低
|
https://www.ibm.com/developerworks/cn/java/j-java6perfmon/index.html
|
|
jvisualvm
|
监控java运行程序的cpu、内存、线程等的使用情况。并且使用图表的方式监控java程序、还具有远程监控能力
|
Usage:
/opt/jdk/lib/visualvm/platform/lib/nbexec {options} arguments
General options:
--help show this help
--jdkhome <path> path to Java(TM) 2 SDK, Standard
Edition
-J<jvm_option> pass <jvm_option> to JVM
--cp:p <classpath> prepend <classpath> to classpath
--cp:a <classpath> append <classpath> to classpath
/opt/jdk/lib/visualvm/platform/lib/nbexec: WARNING: environment variable DISPLAY
is not set
netbeans.user points to a non-existent directory.
Module reload options:
--reload /path/to/module.jar install or reinstall a module JAR file
Additional module options:
--openid <arg> open application with id
<arg>
--openpid <arg> open application with process id
<arg>
--openfile <arg> open file specified by <arg>,
file can be Application snapshot, NetBeans Profiler snapshot or HPROF heap
dump.
--openjmx <arg> open application specified by JMX
connection (host:port)
--modules
--refresh Refresh all catalogs
--list Prints the list of all
modules, their versions and enablement status
--install <arg1>...<argN>
Installs provided JAR files as modules
--disable <arg1>...<argN>
Disable modules for specified codebase names
--enable
<arg1>...<argN> Enable
modules for specified codebase names
--update
<arg1>...<argN> Updates
all or specified modules
--update-all Updates all modules
--extra-uc <arg> Add a extra Update Center (URL)
Core options:
--laf <LaF classname> use given
LookAndFeel class instead of the default
--fontsize <size> set the base font size of the user
interface, in points
--locale <language[:country[:variant]]>
use specified locale
--userdir <path> use specified directory to store user
settings
--cachedir <path> use specified directory to store user
cache, must be different from userdir
--nosplash do not show the splash screen
|
jvisualvm
|
中
|
http://zhouanya.blog.51cto.com/4944792/1370017/
|
|
pack200
|
能对普通的jar文件进行高效压缩
|
Usage:
pack200 [-opt... | --option=value]... x.pack[.gz] y.jar
(For more information, run pack200 --help .)
|
pack200
|
低
|
http://blog.sina.com.cn/s/blog_48a45b9501015ci6.html
|
|
rmiregistry
|
Java 远程对象注册表，用于在当前主机的指定端口上创建并启动一个远程对象注册表。
|
port argument, --help, is not a number.
Usage: rmiregistry <options> <port>
where <options> includes:
-J<runtime flag> Pass argument
to the java interpreter
|
rmiregistry
|
低
|
http://docs.oracle.com/javase/8/docs/technotes/tools/windows/rmiregistry.html
http://blog.csdn.net/a19881029/article/details/9465663
|
|
tnameserv
|
Java IDL瞬时命名服务
|
|
tnameserv -ORBInitialPort 3388
|
低
|
|
|
xjc
|
主要用于根据XML schema文件生成对应的Java类。
|
grammar is not specified
Usage: xjc [-options ...] <schema file/URL/dir/jar> ... [-b
<bindinfo>] ...
If dir is specified, all schema files in it will be compiled.
If jar is specified, /META-INF/sun-jaxb.episode binding file will be
compiled.
Options:
-nv : do not perform strict validation of the
input schema(s)
-extension :
allow vendor extensions - do not strictly follow the
Compatibility
Rules and App E.2 from the JAXB Spec
-b <file/dir> :
specify external bindings files (each <file> must have its own
-b)
If a directory
is given, **/*.xjb is searched
-d <dir> :
generated files will go into this directory
-p <pkg> :
specifies the target package
-httpproxy <proxy> : set HTTP/HTTPS proxy. Format is
[user[:password]@]proxyHost:proxyPort
-httpproxyfile <f> : Works like -httpproxy but takes the
argument in a file to protect password
-classpath <arg> :
specify where to find user class files
-catalog <file> :
specify catalog files to resolve external entity references
support TR9401,
XCatalog, and OASIS XML Catalog format.
-readOnly :
generated files will be in read-only mode
-npa : suppress generation of package level
annotations (**/package-info.java)
-no-header :
suppress generation of a file header with timestamp
-target (2.0|2.1) :
behave like XJC 2.0 or 2.1 and generate code that doesnt use any 2.2
features.
-encoding <encoding> : specify character encoding for generated
source files
-enableIntrospection : enable correct generation of Boolean
getters/setters to enable Bean Introspection apis
-contentForWildcard :
generates content property for types with multiple xs:any derived elements
-xmlschema :
treat input as W3C XML Schema (default)
-relaxng :
treat input as RELAX NG (experimental,unsupported)
-relaxng-compact :
treat input as RELAX NG compact syntax (experimental,unsupported)
-dtd : treat input as XML DTD
(experimental,unsupported)
-wsdl : treat input as WSDL and compile schemas
inside it (experimental,unsupported)
-verbose :
be extra verbose
-quiet : suppress compiler output
-help :
display this help message
-version :
display version information
-fullversion :
display full version information
Extensions:
-Xinject-code :
inject specified Java code fragments into the generated code
-Xlocator :
enable source location support for generated code
-Xsync-methods :
generate accessor methods with the 'synchronized' keyword
-mark-generated :
mark the generated code as @javax.annotation.Generated
-episode <FILE> :
generate the episode file for separate compilation
|
xjc
fileName.xsd -d 生成java实体类的目录 -p 生成的包名
|
低
|
http://itindex.net/detail/44453-jdk-xjc-%E5%91%BD%E4%BB%A4
|
|
extcheck
|
JDK自带的jar文件检测工具，主要用于检测指定的jar文件与Java SDK安装的任何扩展之间是否存在版本冲突。在安装一个扩展之前，你可以使用此工具来检测是否已经安装该扩展的相同版本或最新版本
|
Insufficient number of arguments
Usage: extcheck [-verbose] <jar file>
|
extcheck [-verbose] [-J<runtime
flag>] target.jar
|
低
|
http://www.softown.cn/post/171.html
|
|
java
|
用来运行编译好的Java程序，我们只需要直接运行包含程序入口方法main()的单个字节码文件(D:\Java\test\Hello.class，其中test目录为包名)即可
|
(to execute a class)
or
java [-options] -jar jarfile [args...]
(to execute a jar file)
where options include:
-d32 use a 32-bit data model if available
-d64 use a 64-bit data model if available
-server to select the "server" VM
The default VM is
server.
-cp <class search path of
directories and zip/jar files>
-classpath <class search path of
directories and zip/jar files>
A : separated list of
directories, JAR archives,
and ZIP archives to search
for class files.
-D<name>=<value>
set a system property
-verbose:[class|gc|jni]
enable verbose output
-version print product version and exit
-version:<value>
require the specified
version to run
-showversion print product version and continue
-jre-restrict-search |
-no-jre-restrict-search
include/exclude user
private JREs in the version search
-? -help print this help message
-X print help on non-standard
options
-ea[:<packagename>...|:<classname>]
-enableassertions[:<packagename>...|:<classname>]
enable assertions
with specified granularity
-da[:<packagename>...|:<classname>]
-disableassertions[:<packagename>...|:<classname>]
disable assertions
with specified granularity
-esa | -enablesystemassertions
enable system
assertions
-dsa | -disablesystemassertions
disable system assertions
-agentlib:<libname>[=<options>]
load native agent
library <libname>, e.g. -agentlib:hprof
see also,
-agentlib:jdwp=help and -agentlib:hprof=help
-agentpath:<pathname>[=<options>]
load native agent
library by full pathname
-javaagent:<jarpath>[=<options>]
load Java programming
language agent, see java.lang.instrument
-splash:<imagepath>
show splash screen
with specified image
See http://www.oracle.com/technetwork/java/javase/documentation/index.html
for more details.
|
java
包名.类名
|
中
|
http://www.softown.cn/post/125.html
http://www.cnblogs.com/JeffChen/archive/2008/01/15/1039708.html
|
|
javah
|
是一个C头文件和存根文件生成器。我们可以使用javah从一个Java类生成C头文件和C源代码文件。这些文件提供了Java和C代码进行交互的纽带。
|
Usage:
javah [options] <classes>
where [options] include:
-o <file> Output file (only one of -d
or -o may be used)
-d <dir> Output directory
-v
-verbose Enable
verbose output
-h
--help -? Print this message
-version Print version information
-jni Generate JNI-style
header file (default)
-force Always write output files
-classpath <path> Path from which to load classes
-bootclasspath <path> Path from which to load bootstrap classes
<classes> are specified with their fully qualified names
(for example, java.lang.Object).
|
javah -classpath . cn.softown.HelloJni
|
低
|
http://www.softown.cn/post/175.html
|
|
jcmd
|
用于向正在运行的JVM发送诊断信息请求
|
Usage: jcmd <pid | main class>
<command ...|PerfCounter.print|-f file>
or: jcmd -l
or: jcmd -h
command must be a valid jcmd command
for the selected jvm.
Use the command "help" to
see which commands are available.
If the pid is 0, commands will be
sent to all Java processes.
The main class argument will be used
to match (either partially
or fully) the class used to start
Java.
If no options are given, lists Java
processes (same as -p).
PerfCounter.print display the
counters exposed by this process
-f
read and execute commands from the file
-l
list JVM processes on the local machine
-h
this help
|
jcmd com.example.MyClass name=\"Value
of name argument\"
|
低
|
https://www.google.com.hk/?gfe_rd=cr&ei=DbHKVq76IauS8Qe-q7u4DA&gws_rd=ssl
|
|
jhat
|
JDK自带的Java堆内存分析工具
|
Usage:
jhat [-stack <bool>] [-refs <bool>] [-port <port>]
[-baseline <file>] [-debug <int>] [-version] [-h|-help]
<file>
-J<flag> Pass <flag> directly to the
runtime system. For
example, -J-mx512m to use a
maximum heap size of 512MB
-stack false: Turn off tracking object allocation call
stack.
-refs false: Turn off tracking of references to
objects
-port <port>: Set the port for the HTTP server. Defaults to 7000
-exclude <file>: Specify a file that lists data members that
should
be excluded from the reachableFrom
query.
-baseline <file>: Specify a
baseline object dump. Objects in
both heap dumps with the same ID
and same class will
be marked as not being
"new".
-debug <int>: Set debug level.
0: No debug output
1: Debug hprof file parsing
2: Debug hprof file parsing, no server
-version Report version number
-h|-help Print this help and exit
<file> The file to read
For a dump file that contains multiple heap dumps,
you may specify which dump in the file
by appending "#<number>" to the file name, i.e.
"foo.hprof#3".
All boolean options default to "true"
|
jhat a.map
|
低
|
http://blog.csdn.net/gtuu0123/article/details/6039474
|
|
jstack
|
Java堆栈跟踪工具，主要用于打印指定Java进程、核心文件或远程调试服务器的Java线程的堆栈跟踪信息。
|
Usage:
jstack [-l] <pid>
(to connect to running process)
jstack -F [-m] [-l] <pid>
(to connect to a hung process)
jstack [-m] [-l] <executable>
<core>
(to connect to a core file)
jstack [-m] [-l]
[server_id@]<remote server IP or hostname>
(to connect to a remote debug
server)
Options:
-F
to force a thread dump. Use when jstack <pid> does not respond
(process is hung)
-m
to print both java and native frames (mixed mode)
-l
long listing. Prints additional information about locks
-h or -help to print this help
message
|
jstack -l 2176
|
中
|
http://blog.csdn.net/zhaozheng7758/article/details/8623535/
|
|
keytool
|
Java数据证书的管理工具
|
Key and Certificate Management Tool
Commands:
-certreq Generates a certificate request
-changealias Changes an entry's alias
-delete Deletes an entry
-exportcert Exports certificate
-genkeypair Generates a key pair
-genseckey Generates a secret key
-gencert Generates certificate from a
certificate request
-importcert Imports a certificate or a
certificate chain
-importkeystore Imports one or all entries from another
keystore
-keypasswd Changes the key password of an
entry
-list Lists entries in a keystore
-printcert Prints the content of a certificate
-printcertreq Prints the content of a certificate request
-printcrl Prints the content of a CRL file
-storepasswd Changes the store password of a
keystore
Use "keytool -command_name -help" for usage of command_name
|
keytool -genkeypair -alias
"test1" -keyalg "RSA" -keystore "test.keystore"
|
中
|
http://www.micmiu.com/lang/java/keytool-start-guide/
|
|
policytool
|
策略工具，用于管理用户策略文件(.java.policy)
|
|
policytool
|
低
|
http://www.cnblogs.com/zzj0410/articles/5160919.html
|
|
schemagen
|
根据带有jaxb注解的类来生成schema文件,类似于hibernate
orm的反向生成数据库schema
|
Usage: schemagen [-options ...] <java
files>
Options:
-d <path> : specify where to place
processor and javac generated class files
-cp <path> : specify where to find user
specified files
-classpath <path> : specify where to find user specified
files
-encoding <encoding> : specify encoding to be used for apt/javac
invocation
-episode <file> : generate episode file for separate
compilation
-version : display version information
-fullversion : display full version information
-help : display this usage message
|
|
低
|
http://blog.ziki.cn/942.html
|
|
unpack200
|
JAR文件解压工具，将一个由pack200打包的文件解压提取为JAR文件。
|
Usage:
unpack200 [-opt... | --option=value]... x.pack[.gz] y.jar
(For more information, run unpack200 --help .)
|
|
低
|
|
