Linker scripts之MEMORY】的更多相关文章

1 MEMORY command The MEMORY command describes the location and size of blocks of memory in the target. You can use it to describe which memory regions may be used by the linker, and which memory regions it must avoid. A linker script may contain at m…
1 Intro Every link is controlled by a linker script. The main purpose of the linker script is to describe how the sections in the input files should be mapped into the output file, and to control the memory layout of the output file. The linker alway…
1 Purpose The linker script describes how the sections in the input files should be mapped into the output file, and  control the memory layout of the output file. 2 Simple example The simplest linker script has just one command: `SECTIONS'. Assume p…
The use of the -mmcu switch is of course NOT mandatory. It is simply a convenient way to use the pre-existing linker scripts provided with the MSPGCC4 toolchain. However, if the peripheral address space is larger than the standard 512B of the origina…
from:http://www.hertaville.com/a-sample-linker-script.html A sample script file that will work with C based projects is provided below: /****************************************************************************** * This linker file was developed b…
linux内核的linux-3.6.5\Documentation\kbuild\makefiles.txt Linux Kernel Makefiles This document describes the Linux kernel Makefiles. === Table of Contents === Overview === Who does what === The kbuild files --- 3.1 Goal definitions --- 3.2 Built-in obje…
What is the difference between a Bootrom vs bootloader on ARM systems Bootrom Bootrom (or Boot ROM) is a small piece of mask ROM or write-protected flash embedded inside the processor chip. It contains the very first code which is executed by the pro…
--译自Linux3.9.5 Kernel Makefiles(内核目录documention/kbuild/makefiles.txt) kbuild(kernel build) 内核编译器 This document describes the Linux kernel Makefiles 本文档介绍了Linux内核的Makefile === Table of Contents === 目录 === 1 Overview === 1 概述 === 2 Who does what === 2…
https://www.kernel.org/doc/Documentation/kbuild/kconfig-language.txt Introduction ------------ The configuration database is a collection of configuration options organized in a tree structure: +- Code maturity level options | +- Prompt for developme…
1 OverView ld combines a number of object and archive files, relocates their data and ties up symbol references. This version of ld uses the general purpose BFD libraries to operate on object files. This allows ld to read, combine, and write object f…