xcrun: error: unable to find utility "PackageApplication", not a developer tool or in PATH     1.复制一份packageappliation 到下面目录 /applications/xcode.app/contents/developer/platforms/iphoneos.platform/developer/usr/bin/   2.执行命令 sudo code-select -swi…

Xcode升级到8.3后 用命令进行打包 提示下面这个错误 xcrun: error: unable to find utility "PackageApplication", not a developer tool or in PATH 后面根据对比发现新版的Xcode少了这个PackageApplication先去找个旧版的Xcode里面copy一份过来放到下面这个目录: /Applications/Xcode.app/Contents/Developer/Platforms/i…

运行脚本后报错: xcrun: error: unable to find utility "PackageApplication", not a developer tool or in PATH 后面根据对比发现新版的Xcode少了这个PackageApplication(转注:PackageApplication在前几个版本已被标识为废弃,在8.3版本彻底移除了) 先去找个旧版的Xcode里面copy一份过来 放到下面这个目录: /Applications/Xcode.app/C…

命令行运行react-native 项目时,报错:xcrun: error: unable to find utility "instruments", not a developer tool or in PATH 解决方法:在 终端执行如下命令 sudo xcode-select -s /Applications/Xcode.app/Contents/Developer/ 注意:前提是你已经安装了xcode 原文地址:http://www.th7.cn/Program/IOS/20…

xcrun: error: unable to find utility "instruments", not a developer tool or in PATH   用web storm 运行react-native 工程时,出错:xcrun: error: unable to find utility "instruments", not a developer tool or in PATH 解决办法: 解决方法:在 终端执行如下命令 sudo xcode…

解决方法:在 终端执行如下命令 sudo xcode-select -s /Applications/Xcode.app/Contents/Developer/ 注意:前提是你已经安装了xcode…

在调试ios上的项目的时候出现报错 unable to find utility "instruments", not a developer tool or in PATH 报错原因: 升级过xcode或者xcode多版本共存下没有设置默认版本 解决方案: 打开xcode,选择 切换到Locations,在command line tools 中选择你需要用的版本 此时完全退出xcode,再次尝试run-ios,一切正常!…

解决方案就是去xcode设置里面,将Command line Tools设置一下,在Xcode>preferences>Locations里面,设置之后再运行终端即可…

今天继续作大死,趟php7的配置的坑. 照例,安装了昨天的各种扩展之后,解压php7的压缩文件到 /usr/local/. 然后开始配置config的扩展: ./configure --prefix=/usr/local/php7 \ --with-gd \ --with-freetype-dir \ --enable-gd-native-ttf \ --enable-mysqlnd \ --with-pdo-mysql=mysqlnd \ --with-openssl \ --with-mcr…

error: unable to rewind rpc post data - try increasing http.postBuffererror: RPC failed; curl 56 Recv failure: Connection was abortedfatal: The remote end hung up unexpectedly 当使用git 一次提交的数据过大时,会出现以上错误,按照提示我们增大postBuffer git config --global http.post…