1.ADC1 and ADC2 are 10-bit successive approximation Anolog to Digital Converters. 所谓successive approximation,是逐次逼近的意思: 逐次逼近型ADC解释详见--博客http://blog.sina.com.cn/s/blog_a438e5290102wakc.html 2.ADC分为ADC1和ADC2,ADC1的功能相比起ADC2更为强大,我们使用的是ADC1: 3.ADC有多种模式:(1)…

1.ADC1 and ADC2 are 10-bit successive approximation Anolog to Digital Converters. 所谓successive approximation,是逐次逼近的意思: 逐次逼近型ADC解释详见——博客http://blog.sina.com.cn/s/blog_a438e5290102wakc.html 2.ADC分为ADC1和ADC2,ADC1的功能相比起ADC2更为强大,我们使用的是ADC1: 3.ADC有多种模式:(1)…

http://www.design-reuse.com/articles/14886/fully-digital-implemented-delta-sigma-analog-to-digital-converter.html by Dr. Michael  Gude & Gerriet MuellerCologne Chip AG, Koeln (Cologne), Germany Abstract One of the most challenging tasks in Analog to…

Voltage Translation for Analog to Digital Interface 孕龙逻辑分析仪 ZeroPlus Logic Analyzer How to modify analog output range of Arduino Due In today's microcontroller market, most of the Analog to Digital converters are only able to accept voltages from the…

DIGITALLY ADJUSTABLE BOOST CONVERTER The TPS61045 is a high frequency boost converter with digitally programmable output voltage and true shutdown. During shutdown, the output is disconnected from the input by opening the internal input switch. This…

0.前言 本文主要介绍K64的ADC部分的特性,内部架构,信号描述及操作接口等 1.简介 1.1.ADC模块特性 线性逐次逼近算法,达16bit分辨率 达到4对差分和24个单端模拟量输入 输出模式 差分为16bit,13bit,11bit和9bit模式 单端为16bit,12bit,10bit和8bit模式 对于差分输出格式为带符号扩展的16bit的2的补码 对于单端输出格式为右对齐无符号格式 支持单次或连续转换 可配置采样时间和转换速率 转换完成或硬件平均完成标志和中断 有四路输入时钟源可选…

This is the quick start guide for the Analog to Digital Converter (ADC), with step-by-step instructions on how to configure and use the driver in a selection of use cases. The use cases are described with "setup" and "usage" sections,…

ADC分类 直接转换模拟数字转换器(Direct-conversion ADC),或称Flash模拟数字转换器(Flash ADC) 循续渐近式模拟数字转换器(Successive approximation ADC) 跃升-比较模拟数字转换器(Ramp-compare ADC) 威尔金森模拟数字转换器(Wilkinson ADC 集成模拟数字转换器(Integrating ADC) Delta编码模拟数字转换器(Delta-encoded ADC) 管道模拟数字转换器(Pipeline ADC…

模数转换器即A/D转换器,或简称ADC,通常是指一个将模拟信号转变为数字信号的电子元件.通常的模数转换器是将一个输入电压信号转换为一个输出的数字信号.由于数字信号本身不具有实际意义,仅仅表示一个相对大小.故任何一个模数转换器都需要一个参考模拟量作为转换的标准,比较常见的参考标准为最大的可转换信号大小.而输出的数字量则表示输入信号相对于参考信号的大小. 简介 将模拟信号转换成数字信号的电路,称为模数转换器(简称a/d转换器或adc,analog to digital converter),A/D转…

http://www.planetanalog.com/author.asp?section_id=3041&doc_id=563055 Jonathan Harris, Product Applications Engineer, Analog Devices, 6/2/2014 As I thought about where to go with the next blog, I looked over the comments and questions from my previous…