Username: vyatta Password: vyatta 配置网卡: 编辑: configure 内部网络IP地址配置:192.168.0.1 set interfaces ethernet eth0 address 192.168.0.1/24 set interfaces ethernet eth0 description Inside 从DHCP 服务器上自动外网IP地址: set interfaces ethernet eth1 address dhcp set interfa…

官网地址: https://www.mindspore.cn/install 所有依赖环境 进行sudo make install 安装,最终报错: 错误记录信息: cat     /tmp/mindspore/build/mindspore/CMakeFiles/CMakeError.log Performing C SOURCE FILE Test CMAKE_HAVE_LIBC_PTHREAD failed with the following output:Change Dir: /tm…

vyatta是一个小巧而强大的基于debian的 Linux路由发行版,随着云计算的深入,云内部的虚拟机通信已经摆脱了物理路由器的束缚,而路由器变成了一个逻辑存在,而不是一个物理实体,云路由由此诞生,给很多软路由提供了新的发展思路,vyatta就是其中的佼佼者.vyatta不仅可以安装在物理机上,还支持各种虚拟化平台,vmware.xen.kvm.hyperv等.Vyatta分为商业版和社区版,商业版通过订阅模式发布,需要序列号,配备了一个简单的web操作界面:社区版称为Vyatta Core,…

https://www.reddit.com/r/networking/comments/3dvwfy/who_here_is_using_vyos/ Vyatta came in two flavors: Community Edition and Subscription Edition. VyOS was forked from Vyatta CE 6.6R1. The commercial version of Vyatta at the time (SE) used a differe…

vyatta的fork开源版本vyos 来源: https://www.reddit.com/r/networking/comments/3dvwfy/who_here_is_using_vyos/ Vyatta came in two flavors: Community Edition and Subscription Edition. VyOS was forked from Vyatta CE 6.6R1. The commercial version of Vyatta at the…

原文发表于:2010-09-19 转载至cu于:2012-07-21 以下是"开源中国社区"写到的: http://www.oschina.net/news/11423/vyatta-6-1 Vyatta software是一份完整的.即刻可用的.基于Debian的发行,它被设计为能将一套标准的x86硬件转换为企业级的路由器/防火墙.Vyatta软件包括对常用网络接口.工业标准路由协议和管理协议的支持.与先前的开源软件路由项目不同,所有的这些特性都可以通过单个的命令行接口(CLI)或是…

SOLUTION VERIFIED September 13 2016 KB1248793 Environment Red Hat Enterprise Linux 7 NetworkManager teamd Issue Would like to configure a VLANs with Teaming in RHEL 7. Need to know how to make VLANs like team0.10 for a team0 device with RHEL and Netw…

SOLUTION VERIFIED February 5 2014 KB340153 Environment Red Hat Enterprise Linux 6 (All Versions) Red Hat Enterprise Linux 5 (All Versions) Issue Need to configure VLAN on bonded interface and a bridge on top of this VLAN tagged bonded interface. Reso…

environment Red Hat Enterprise Linux 5.4 or later Red Hat Enterprise Linux 6.0 or later KVM virtual machines question How do I configure a bridged network interface for KVM using Red Hat Enterprise Linux 5.4 or later? On RHEL 6, what is the recommend…

本文教你如何使用autoconf.automake等来制作一个以源代码形式(.tar.gz)发布的软件.并可在执行configure时使用自定义参数. 一.概述和基础知识 在Linux下得到一个以源代码形式发布的包(一般为.tar.gz或.tar.bz2格式),我们可以用 ./confiugure.make.make install来编译安装,其中在运行./configure的时候还可以根据自己的需要加入不同的参数(可用./configure --help来查看参数表). 先说说执行./conf…