How To Configure NetScaler AppFlow for SolarWinds 来源  https://support.citrix.com/article/CTX227300 Article | Configuration | Created: 02 Sep 2017 | Modified: 04 Sep 2017 Applicable Products NetScaler Objective This article describes how to configure …

工作需要,所以英文+中文,绝壁不是装逼...(关于这点勿喷) This post will cover only the basics for getting NetScaler up and running to support XenDesktop\XenApp. It in no way will help you do some other more advanced NetScaler stuff. MIPS's and SNIP's and NSIP's and VIP's, Oh…

NetScaler ‘Counters’ Grab-Bag! https://www.citrix.com/blogs/author/andrewre/ https://www.citrix.com/blogs/2014/05/02/netscaler-counters-grab-bag/ The NetScaler ADC is a fantastic appliance for doing a host of different things as we all know. But did…

The message basically is saying that a replicated session is overriding an existing session in that node. Quite often the version id is 1 but regardless of the version id, the problem is the same. Here's an scenario: Let's say you have a first reques…

nswl 收集日志 参考链接:https://docs.citrix.com/en-us/citrix-adc/12-1/system/web-server-logging.html PS C:\Users\LSGX\Desktop\xxx\bin> .\nswl.exe -help usage : nswl -[cmds] [cmd arguments] cmds cmd arguments: -f <filename> -d debug -help - detail help -st…

MPSVPX 配置 设置主机名,IP地址,掩码,网关,DNS服务器,时区(使用WebGUI界面设置). bash-2.05b# cat svm.conf arp -d -a route flush ifconfig 0/1 192.168.195.95 netmask 255.255.255.0 ifconfig 1/1 192.168.1.95 netmask 255.255.255.0 ifconfig 1/2 10.0.100.95 netmask 255.255.255.0 ifconf…

官网地址: https://www.mindspore.cn/install 所有依赖环境 进行sudo make install 安装,最终报错: 错误记录信息: cat     /tmp/mindspore/build/mindspore/CMakeFiles/CMakeError.log Performing C SOURCE FILE Test CMAKE_HAVE_LIBC_PTHREAD failed with the following output:Change Dir: /tm…

SNMP OID Reference - NetScaler 10 https://docs.citrix.com/content/dam/docs/en-us/netscaler/10/downloads/ctx132381.htm System Limits for a NetScaler Appliance 参考 https://support.citrix.com/content/dam/supportWS/kA460000000CcAzCAK/CTX118716.pdf This re…

Spanning Tree Protocol (STP) in NetScaler Appliance 来源 https://support.citrix.com/article/CTX112341 ------------------------------------------------------------------------------------- Information This contains information about Spanning Tree Protoc…

NetScaler + Wireshark = A Perfect Combination! https://www.citrix.com/blogs/2014/05/03/netscaler-wireshark-a-perfect-combination/ Supercharge your Wireshark! Troubleshooting many of the issues that occur in TCP networks can be rather challenging if y…

NetScaler Best Practice With VMAC In A High Availability Configuration https://www.citrix.com/blogs/2015/01/05/netscaler-best-practice-with-vmac-in-a-high-availability-configuration/ The NetScaler appliance is an extremely flexible application delive…

How to Create a Perl Based Custom Monitor on NetScaler https://support.citrix.com/article/CTX227727   Article | Configuration  | Created: 14 Sep 2017 | Modified: 27 Apr 2018   Applicable Products NetScaler Objective This article describes how to crea…

FAQ: SNMP on NetScaler Appliance https://support.citrix.com/article/CTX122436 https://docs.citrix.com/content/dam/docs/en-us/netscaler/10/downloads/ctx132381.htm https://docs.citrix.com/en-us/netscaler/10-1/ns-reference-con/netscaler-snmp-oid-referen…

深入理解Netscaler INat http://blog.51cto.com/caojin/1898173 Netscaler的INat主要是用作基于目的地址的转换,将client访问的公网IP通过Netscaler转换成服务器的私网IP,与DNAT作用类似.由于Netscaler默认的工作机制就是同时做源IP:[源端口]+目的IP:[目的端口]的转换,也就是说它默认执行了NAPT(端口映射)但有不完全等同与NAPT.NAPT只替换目的IP和端口,而Netscaler默认是全部替换的. 测试…

NetScaler 12.1 Deploy Package NS_VPX_Deploy_Package 百度网盘共享地址https://pan.baidu.com/s/1OT0Hxuz6ZBLwwM5J7LWLIg NS-kernel 文件夹: NS-12.1-48.13_nc_64 文件夹: NS-12.0-56.20_nc_32 文件夹: NetScaler 实验操作手册_v0.1.0.0.pdf ==============================================…

境搭建概述 本文主要介绍Netscaler的安装配置,以及与StoreFront相结合,实现外网访问内网资源.当用户访问时,Netscaler Gateway Virtual Server将把请求转给 StoreFront,通过443端口,建立SSL连接. 基于CWC环境,DDC在云端,资源在本地,将Netscaler配置在本地,配合本地 StoreFront,通过Netscaler作为访问入口,以实现外网环境下对内网资源的访问. 环境部署中需要用到3个固定IP,分别是NSIP,VIP,SNIP…

SOLUTION VERIFIED September 13 2016 KB1248793 Environment Red Hat Enterprise Linux 7 NetworkManager teamd Issue Would like to configure a VLANs with Teaming in RHEL 7. Need to know how to make VLANs like team0.10 for a team0 device with RHEL and Netw…

SOLUTION VERIFIED February 5 2014 KB340153 Environment Red Hat Enterprise Linux 6 (All Versions) Red Hat Enterprise Linux 5 (All Versions) Issue Need to configure VLAN on bonded interface and a bridge on top of this VLAN tagged bonded interface. Reso…

environment Red Hat Enterprise Linux 5.4 or later Red Hat Enterprise Linux 6.0 or later KVM virtual machines question How do I configure a bridged network interface for KVM using Red Hat Enterprise Linux 5.4 or later? On RHEL 6, what is the recommend…

本文教你如何使用autoconf.automake等来制作一个以源代码形式(.tar.gz)发布的软件.并可在执行configure时使用自定义参数. 一.概述和基础知识 在Linux下得到一个以源代码形式发布的包(一般为.tar.gz或.tar.bz2格式),我们可以用 ./confiugure.make.make install来编译安装,其中在运行./configure的时候还可以根据自己的需要加入不同的参数(可用./configure --help来查看参数表). 先说说执行./conf…

这篇文章主要briefly introduce the Install and configure SharePoint 2013 Workflow. Microsoft 推出了新的Workflow engine 针对于SharePoint 2013 Server--Workflow Manager,这个Service是基于Windows Workflow Foundation的,但是OOTB(out-of-the-box)安装却被隐藏了,当sharepoint 2013 Server安装的时候…

This article will simply descript how to configure and publish a InfoPath step by step. Note: To configure and publish InfoPath to SharePoint 2013 ,required the follow items: (1).SharePoint Enterprise 2013. (2).Microsoft InfoPath Designer 2013. (3).A…

dpkg:处理软件包dradis (--configure)时出错!解决方案:1.将info文件夹更名%mv /var/lib/dpkg/info /var/lib/dpkg/info_old2.新建新的info文件夹%mkdir /var/lib/dpkg/info3.更新%apt-get update %apt-get -f install4.将上一步在info中生成的文件移动到info_old中%mv /var/lib/dpkg/info/* /var/lib/dpkg/info_old5…

CentOS / Redhat : Configure CentOS as a Software Router with two interfaces   Linux can be easily configured to share an internet connection using iptables. All you need to have is, two network interface cards as follows: a) Your internal (LAN) netwo…

这些都是典型的使用GNU的AUTOCONF和AUTOMAKE产生的程序的安装步骤. ./configure是用来检测你的安装平台的目标特征的.比如它会检测你是不是有CC或GCC,并不是需要CC或GCC,它是个shell脚本. make是用来编译的,它从Makefile中读取指令,然后编译. make install是用来安装的,它也从Makefile中读取指令,安装到指定的位置. AUTOMAKE和AUTOCONF是非常有用的用来发布C程序的东西. 1.configure,这一步一般用来生成 M…

Terms {activemq.home}: The ActiveMQ installation folder. How to configure ActiveMQ to use JAAS Authentication? Enable Jaas Authentication Plugin Add below configuration into {activemq.home}\conf\activemq.xml, under /beans/broker node. Please ignore t…

原文连接:http://www.linuxidc.com/Linux/2011-02/32211.htm 这些都是典型的使用GNU的AUTOCONF和AUTOMAKE产生的程序的安装步骤. ./configure是用来检测你的安装平台的目标特征的.比如它会检测你是不是有CC或GCC,并不是需要CC或GCC,它是个shell脚本.make是用来编译的,它从Makefile中读取指令,然后编译.make install是用来安装的,它也从Makefile中读取指令,安装到指定的位置. AUTOMAK…

在前面的部分中,我们学习了Code-First默认约定,Code-First使用默认的约定,根据你的领域类,然后生成概念模型. Code-First模式,发起了一种编程模式:约定大于配置.这也就是说,当你需要的时候,你可以重写这些约定,通过配置你的领域类.这里有两种方式来配置你的领域类实体: DataAnnotations(数据注解) Fluent API(姑且翻译为:流畅API) 数据注解: 数据注解是基于配置的简单特性,你可以应用到你的领域类或者其属性中.你可能会发现大多数的特性都在这个命令…

现在,开始学习怎么配置一对一的关系,众所周知,一对一的关系是:一个表中的主键,在另外一个表中,同时是主键和外键[实际上是一对零或者一对一]. 请注意:一对一的关系,在MS SQL Server中,技术上是不可能实现的,主要还是一对零或者一对一的关系. 想了解更多的实体关系,请看MSDN,这里面讲解的很详细.----->>>Entity Relationship. 一.使用数据注解特性,来配置一对一(一对零)的关系. using System; using System.Collectio…

现在,我们将学习怎么配置一对多的关系. Visit Entity Relationship section to understand how EF manages one-to-one, one-to-many, and many-to-many relationships between the entities. Note: You do not need to configure for one-to-many relationships either using DataAnnotat…