出现这种错误的情况: 用iphone5模拟器编译程序正常, 用iphone5s以上的模拟器编译出现Undefined symbols for architecture x86_64: 报错 和 ld: warning: ld: warning: ignoring file警告, 用真机编译正常... 网上找了很多解决方法都没办法解决..都是说更改bulid setting的一些相关设置..然后都木有什么卵用... 这里附上我的解决方法..其实也不是很麻烦...(我没有更改bulid settin…

Undefined symbols for architecture x86_64: "_OBJC_CLASS_$_The49DayPersonalFullscreenGiftModel", referenced from: objc-class-ref in The49DayPersonalRoomGiftModel.o ld: symbol(s) not found for architecture x86_64 clang: error: linker command faile…

问题:Undefined symbols for architecture x86_64:   ld: symbol(s) not found for architecture x86_64 问题原因:所用的库不支持 X86_64架构 解决方法:在Target —> BuildSetting —> Architectures中修改为$(ARCHS_STANDARD_32_BIT)如下图:  …

当出现  linker command failed with exit code 1 (use -v to see invocation) 的错误总结,具体内容如下: Undefined symbols for architecture x86_64:   "_OBJC_CLASS_$_AppDelegate", referenced from:       objc-class-ref in main.o ld: symbol(s) not found for architectu…

ld: warning: ignoring file xxxPath/libbaidumapapi.a, missing required architecture x86_64 in file xxxPath/libbaidumapapi.a (3 slices)Undefined symbols for architecture x86_64:  "_OBJC_CLASS_$_BMKMapManager", referenced from:      objc-class-ref…

错误如下: Undefined symbols for architecture x86_64: "_OBJC_CLASS_$_RoutingHTTPServer", referenced from: 出现类似  Undefined symbols for architecture x86_64  错误,一般是缺少包的引用,请尝试xcode-->项目-->Build phases-->Link Binaray With Libraries-->选择“+”号--&…

1> error 详情: Undefined symbols for architecture x86_64: "_OBJC_CLASS_$_GiftAnimationView", referenced from: _OBJC_CLASS_$_GiftFoAnimationView in GiftFoAnimationView.o "_OBJC_METACLASS_$_GiftAnimationView", referenced from: _OBJC_MET…

duplicate symbols for architecture x86_64 两个不第三方SDK之间的文件里面内容重复了,类似 file.h+file.m 和 CHfile.h+CHfile.m,里面内容一模一样,要解决这个就得去其中一个SDK里面的文件,保证只使用一个.…

解决方法: 因为GCC编译的时候没有链接C++ standard library, 因此在编译的时候要加入符号 -lstdc++ 使用命令: gcc myprog.c -o myprog -lstdc++…

目前临时的解决办法是 1.把1.选中Targets—>Build Settings—>Architectures. 把build active architectures only 改为 NO. 2. 把最下面的Valid Architectures中的arm64参数删掉就可以了 或者: 双击Architectures,选择other,删除$(ARCH_STANDARD),然后增加armv7和armv7s(写上:armv7和armv7s) 即 :armv7和armv7s $(ARCHS_STA…