Cisco router 预配: Router>en Router#config t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#hostname r0 r0(config)# Router(config)#enable secret yanjin Router(config)#no ip domain-lookup Router(config)#line console 0 Route…
Operating Cisco Router consider the hardware on the ends of the serial link, in particular where the channel service unit/data service unit (CSU/DSU) hardware resides on each end of the serial link. It sits either outside the router as a separate dev…
Login to Router and change to privileged modec:\>telnet 192.168.6.1Trying 192.168.6.1...Connected to 192.168.6.1.Escape character is '^]'.User Access VerificationUsername: adminPassword:MC1812>MC1812>enablePassword:MC1812#At privileged mode, chec…
Switch>en Switch#config t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#hostname sw0 sw0(config)#clock set 8:33:26 17 Feb 2012 ^ % Invalid input detected at '^' marker. sw0(config)#exit %SYS-5-CONF…
absolute : to specify an absolute time for a time-range (in time-range configuration mode) no absolute buffer-length : to specify the maximum length of the data stream to be forwarded (in line configuration mode) no buffer-length buffers : to make ad…
copy system:running-config nvram:startup-config : to save your configuration changes to the startup configuration so that the changes will not be lost if the software reloads or a power outage occurs command | {begin | include | exclude} regular-expr…
