【NX二次开发-UFUN创建块UF_MODL_create_block1】的更多相关文章

NX二次开发-UFUN创建块UF_MODL_create_block1

NX9+VS2012 #include <uf.h> #include <uf_modl.h> UF_initialize(); UF_FEATURE_SIGN Sign = UF_NULLSIGN;//设置布尔 ] = {0.0, 0.0, 0.0};//设置原点 ] = {"};//设置长宽高 tag_t BlkTag = NULL_TAG; UF_MODL_create_block1(Sign, Corner_pt, Edge_Len, &BlkTag);…

NX二次开发-UFUN创建块UF_MODL_create_block

NX9+VS2012 #include <uf.h> #include <uf_modl.h> UF_initialize(); UF_FEATURE_SIGN Sign = UF_NULLSIGN;//设置布尔 ] = {0.0, 0.0, 0.0};//设置原点 ] = {"};//设置长宽高 tag_t BlkTag = NULL_TAG; UF_MODL_create_block(Sign, NULL_TAG, Corner_pt, Edge_Len, &…

NX二次开发-UFUN创建镜像体UF_MODL_create_mirror_body

NX11+VS2013 #include <uf.h> #include <uf_modl.h> UF_initialize(); //创建块 UF_FEATURE_SIGN Sign = UF_NULLSIGN; ] = {0.0, 0.0, 0.0}; ] = {"}; tag_t BlkTag = NULL_TAG; UF_MODL_create_block1(Sign, Corner_Pt, Edge_Len, &BlkTag); //特征找体 tag_t…

NX二次开发-UFUN创建固定的基准平面UF_MODL_create_fixed_dplane

NX11+VS2013 #include <uf.h> #include <uf_modl.h> UF_initialize(); //创建块 UF_FEATURE_SIGN Sign = UF_NULLSIGN; ] = {0.0, 0.0, 0.0}; ] = {"}; tag_t BlkTag = NULL_TAG; UF_MODL_create_block1(Sign, Corner_Pt, Edge_Len, &BlkTag); //特征找体 tag_t…

NX二次开发-UFUN获取块的参数UF_MODL_ask_block_parms

NX11+VS2013 #include <uf.h> #include <uf_modl.h> #include <uf_ui.h> UF_initialize(); //创建块 UF_FEATURE_SIGN Sign = UF_NULLSIGN;//设置布尔 ] = { 0.0, 0.0, 0.0 };//设置原点 ] = { " };//设置长宽高 tag_t BlkTag = NULL_TAG; UF_MODL_create_block1(Sign,…

NX二次开发-UFUN创建倒圆UF_MODL_create_blend

NX9+VS2012 #include <uf.h> #include <uf_modl.h> UF_initialize(); //创建块 UF_FEATURE_SIGN Sign = UF_NULLSIGN; ] = {0.0, 0.0, 0.0}; ] = {"}; tag_t BlkTag = NULL_TAG; UF_MODL_create_block1(Sign, CornerPt, EdgeLen, &BlkTag); //特征找边 uf_list_…

NX二次开发-UFUN创建倒角UF_MODL_create_chamfer

NX9+VS2012 #include <uf.h> #include <uf_modl.h> UF_initialize(); //创建块 UF_FEATURE_SIGN Sign = UF_NULLSIGN; ] = {0.0, 0.0, 0.0}; ] = {"}; tag_t BlkTag = NULL_TAG; UF_MODL_create_block1(Sign, CornerPt, EdgeLen, &BlkTag); //特征找边 uf_list_…

NX二次开发-UFUN创建圆柱UF_MODL_create_cyl1

NX9+VS2012 #include <uf.h> #include <uf_modl.h> #include <uf_obj.h> #include <uf_ui.h> UF_initialize(); //创建圆柱 UF_FEATURE_SIGN Sign = UF_NULLSIGN; ] = {0.0, 0.0, 0.0}; "; "; ] = {0.0, 0.0, 1.0}; tag_t CylTag = NULL_TAG; U…

NX二次开发-UFUN创建工程图注释UF_DRF_create_note

NX9+VS2012 #include <uf.h> #include <uf_drf.h> #include <NXOpen/Annotations_Note.hxx> #include <NXOpen/NXObjectManager.hxx> UF_initialize(); //创建注释 char* TextString[] = {"Caesar卢尚宇"}; ] = {,,}; tag_t NoteTag = NULL_TAG; U…

NX二次开发-UFUN创建球UF_MODL_create_sphere1

NX11+VS2013 #include <uf.h> #include <uf_modl.h> UF_initialize(); //创建球 UF_FEATURE_SIGN Sign = UF_NULLSIGN;//设置布尔 ] = { 0.0, 0.0, 0.0 };//原点 ";//直径 tag_t SphereTag = NULL_TAG; UF_MODL_create_sphere1(Sign, Center, Diam, &SphereTag); UF…