如果你的CentOS系统中没有setup命令,很有可能是因为你安装CentOS系统时采用了最小化安装(minimal).这时,你执行setup命令时,就会报错: 错误信息: 1[root@localhost ~]# setup 2-bash: setup: command not found 这是因为你的CentOS系统中默认就没有setup命令,也没有setup命令工具配套的组件.这时,可采用yum工具在线逐个安装,具体的安装方法如下. 解决方法: 1.yum -y install setup

因为我是在VMware上安装的centOS,网络设置选择的是桥接模式,这样可以和实体机使用同样的网络,但是也使用同样的IP,因此就需要设置一下IP了,否则使用ifconfig查询ip的时候显示的是127.0.0.1,这样就无法使用元素弄成连接工具进行操作了. 设置步骤如下: 1.命令行输入 “setup”回车 2.选择第三个”Network configuration”,回车 3.选择第一个,回车 4.还是第一个,其实也就是选择网卡了,然后回车 5.设置成我这样子的就可以了 需要注意的是,第三行

出现这个问题是因为 Minimal 安装模式 所以并没有安装 setuptool 软件. 解决办法为: 使用yum 源直接下载安装 或者 去下载 setuptool 软件包安装 #安装setuptool yum install setuptool #可以发现执行setup后不全,再安装一个用于系统服务管理 yum install ntsysv #安装setup中配套的防火墙设置 yum install system-config-securitylevel-tui #安装setup中配套的网络设

centos7 安装docker 1: 安装必要的一些系统工具sudo yum install -y yum-utils device-mapper-persistent-data lvm2 2: 添加软件源信息sudo yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo3: 更新并安装 Docker-CEsudo yum makecache fastsudo

http://wiki.centos.org/TipsAndTricks/BrokenVserver centos mirror:  http://mirror.centos.org/centos/6/os/x86_64/  注意匹配正确的版本,  /ect/yum.conf How to install yum on a Virtual Server Contents But I DO have yum already, and I AM on CentOS I don't have yum

Liunx可分为Redhat系列和debian系列,其采用的都是相同的Liunx内核,最大的不同点就是对RPM包的管理,使用的软件源不同.但相比之下debian系列的桌面端较好,Redhat其稳定性较好.所以笔者选择使用Redhat系列的CentOS. Liunx整体注意 1> 命令或者内容严格区分大小写的 2> 所有内容都是以文件形式存在,包括硬件 3> 没有扩展名的区分,携带扩展名仅仅是为了让用户知道是什么文件 远程工具 服务器默认打开 命令行工具:SecureCRT,putty 文

Cacti – Network and performance monitoring tool   Cacti is one of best monitoring tool used to monitor network, CPU load, memory, Disk and other services.Cacti uses PHP for front end, RRDTool for graphing and mysql for storage.Cacti installation on c

目录 1. 所用系统与软件版本 2. 虚拟机配置 3. Ubuntu 12.04上的配置 3.1 准备 3.2 通过setup脚本进行配置 3.3 通过命令配置 4. CentOS 7.0上的配置 4.1 准备 正文 DPDK介绍见:www.dpdk.org 本文介绍的步骤基本适用于dpdk 1.7.0 - dpdk 2.0.0 各版本.只是setup.sh显示的菜单有一些小的不同: 同样的,也适用于ubuntu更高版本(已在ubuntu 12.04+及14.04上验证过) 回到顶部 1. 所用

DPDK介绍见:www.dpdk.org 本文介绍的步骤基本适用于dpdk 1.7.0 - dpdk 2.0.0 各版本.只是setup.sh显示的菜单有一些小的不同:同样的,也适用于ubuntu更高版本(已在ubuntu 12.04+及14.04上验证过) 1. 所用系统与软件版本 系统:Ubuntu 12.04.3 LTS 64位, CentOS Linux release 7.0.1406 64位dpdk: 1.7.0 (下载页) dpdk 1.7.1 经过试验,发现在这两个系统上都有问题

问题: CentOS7安装完毕,重新开机启动后显示: Initial setup of CentOS Linux 7 (core) 1) [x] Creat user 2) [!] License information (no user will be created) (license not accepted) Please make your choice from above ['q' to quit | 'c' to continue | 'r' to refresh]: 解决方法:

转:装完Centos7提示Initial setup of CentOS Linux 7 (core)   在用U盘装完CentOS后,重新开机启动后显示: Initial setup of CentOS Linux 7 (core) 1) [x] Creat user 2) [!] License information (no user will be created) (license not accepted) Please make your choice from above ['q

How to Setup network on centos 7     After installing Centos 7, You may not able to connect network in that machine. This will happen because Ethernet interfaces are not enabled by default.This guide will help you to setup network on centos 7 .This g

source url:http://tecadmin.net/ip-failover-setup-using-keepalived-on-centos-redhat-6/ Keepalived is used for IP failover between two servers. It facilities for load balancing and high-availability to Linux based infrastructures. It works on VRRP ( Vi

在用U盘装完CentOS后,重新开机启动后显示: Initial setup of CentOS Linux 7 (core) 1) [x] Creat user 2) [!] License information (no user will be created) (license not accepted) Please make your choice from above ['q' to quit | 'c' to continue | 'r' to refresh]: 解决方法: 输

setsebool allow_ftpd_full_access onsetsebool -P ftp_home_dir on vsftpd (Very Secure File Transport Protocol Daemon) is a secure, fast FTP server for Unix/Linux systems. In this how-to article, let us see how to setup a basic FTP server using vsftpd o

We have already shown you How to Setup VSFTPD Server on CentOS 6.5/6.4 in our previous article. In that method, the users created in the server itself were logged-in to FTP server (i.e. local users). But what if the users who don’t have a local accou

CentOS7安装完毕,重新开机启动后显示: Initial setup of CentOS Linux 7 (core) 1) [x] Creat user 2) [!] License information (no user will be created) (license not accepted) Please make your choice from above ['q' to quit | 'c' to continue | 'r' to refresh]: 解决方法: 输入“

Setup FTP Server on CentOS 7 Install vsftpd vsftpd (Very Secure File Transport Protocol Daemon) is a secure, fast FTP server for Unix/Linux systems. # install vsftp yum install vsftpd -y #edit config file and ## disable anonymous login : change YES t

在用U盘装完CentOS后,重新开机启动后显示: Initial setup of CentOS Linux 7 (core) 1) [x] Creat user 2) [!] License information (no user will be created) (license not accepted) Please make your choice from above ['q' to quit | 'c' to continue | 'r' to refresh]: 解决方法: 输

安装完成centos7后出现如下提示: Initial setup of CentOS Linux 7 (core) 1) [x] Creat user 2) [!] License information (no user will be created) (license not accepted) Please make your choice from above ['q' to quit | 'c' to continue | 'r' to refresh]: 解决方案: 输入[1],