core1#conf tEnter configuration commands, one per line. End with CNTL/Z.core1(config)#inter range gi0/1-4core1(config-if-range)#do show etherch sumFlags: D - down P - bundled in port-channel I - stand-alone s - suspended H - Ho
cisco交换机上的链路聚合 2层 ethernet channel (interface)#channel-group number mode {on | auto [no-silent]|desirable [no-silent]} on 使用EthernetChannel 但不发送pagp分组 off 禁用EthernetChannel desirable 交换机主动要求形成一个EthernetChannel 发送pagp分组 auto 交换机被动形成一个Eth
在Netty中提供了ChannelGroup接口,该接口继承Set接口,因此可以通过ChannelGroup可管理服务器端所有的连接的Channel,然后对所有的连接Channel广播消息. Server端: public class BroadCastServer { public static void run(int port) { EventLoopGroup boss = new NioEventLoopGroup(); EventLoopGroup worker = new NioE
串口通过远程CRT登录,波特率9600用户名和密码都是adminDo you want to use the wizard for initial configuration?选择no打开ip routingsx1012 [standalone: master] (config) # ip routing 设置mgmt0端口的ip地址sx1012 [standalone: master] (config) # interface mgmt0 ip address 172.21.1.251 255