I recently used ifconfig en1 1.2.3.4 to set the IP address of a network interface (specifically, the wireless card) on a Mac… How can I remove/unset it? Using the graphical network configuration tool doesn't seem to change (or even be aware of) this
在Windows中,如果不插网线,就看不到IP地址,即使这个块网卡已经绑定了固定IP,原因是操作系统开启了DHCP Media Sense功能,该功能的作用如下: 在一台使用 TCP/IP 的基于 Windows 的计算机上,您可以使用媒体感知功能来检测网络媒体是否处于链接状态.以太网适配器和集线器通常有一个指示连接状态的“链接”灯.该状态与 Windows 解释的链接状态相同.只要 Windows 检测到“故障”状态,它就会从该适配器中删除绑定的协议,直到检测到该适配器重新“正常工作”时为止.
打开Genymotion运行虚拟机提示如下错误: The Genymotion Virtual device could not obtain an IP address.For an unknown reason, VirtualBox DHCP has not assigned an IP address 我的解决办法:
今天配置在Windows server 2012 R2 上配置IIS8时,出现局域网内无法使用IP访问站点的问题,查找资料依然无法解决.最后发现IIS8配置好主机名后无法使用主机IP访问站点,只能使用主机名称.所以需要将无法在局域网内访问的站点在IIS8上右击选择编辑绑定然后再选中要更改的网站,再点击右边的编辑,删除主机名称,保存后即可使用主机Ip访问站点了!如果localhost无法访问多半是host文件屏蔽了该IP,需要删除host中的注释即可!