作者:一去丶二三里 来源:CSDN 原文:https://blog.csdn.net/liang19890820/article/details/51774724 注意:所有的配置中,/user中的/指所在逻辑盘的根目录,而./表示当前目录,如果你的项目名为project,则QT Creator生成一个 build-project-Desktop_Qt_5_11_1_MinGW_32bit-Debug目录,它即是当前目录. 配置 CONFIG 指定编译器选项和项目配置,值由qmake内部识别并具

Download OpenCV 2.4.10 Download CMake 2.8 Open CMake and choose the source code directory and build binary directory Then click "Configure", and "Generate" Go to the build binary directory, open terminal, and run the following command:

Compile Graphics Magick, Boost, Botan and QT with MinGW64 under Windows 7 64 Sun, 01/01/2012 - 15:43 — admin INTRODUCTION This tutorial explains how to compile several important C++ libraries under Windows 7 64 bits using MinGW 64 for 64 bits archite

libpng library Makefile LOCAL_PATH:= $(call my-dir) include $(CLEAR_VARS) LS_C=$(subst $(1)/,,$(wildcard $(1)/*.c)) LOCAL_MODULE := png LOCAL_SRC_FILES := \ $(filter-out example.c pngtest.c,$(call LS_C,$(LOCAL_PATH))) LOCAL_EXPORT_C_INCLUDES := $(LOC

原文链接: http://blog.qt.io/blog/2017/05/31/qt-5-9-released 翻译内容如下,采用的是第三方某在线翻译软件,所以有些地方不是太精确,纵然大吉做了一定的调整,但是终究不得完美! 我很高兴让大家知道,Qt 5.9.0刚刚发布.我们已经投入了大量的工作,使Qt 5.9成为目前为止我们开发的最好的Qt版本.  在Qt 5.9中,我们对性能和稳定性有了强烈的关注.我们已经在Qt中修复了大量的bug,并且我们已经做了大量的工作来改进我们的持续集成系统.这将使我

Download ITK 4.8.1 Download Qt 5.4 with MinGW 4.9.1 Download CMake 3.2.0 I assume you've already installed Qt 5.4 with MinGW 4.9.1 and CMake 3.2.0 correctly. Please intall and configure VTK before the following steps, here is the blog for VTK: VTK 6.

Download VTK 6.3.0 Download Qt 5.4 with MinGW 4.9.1 Download CMake 3.2.0 I assume you've already installed Qt 5.4 with MinGW 4.9.1 and CMake 3.2.0 correctly. Pre-process the VTK: Open CMakeLists.txt in your extracted VTK-6.3.0 folder, find set(VTK_US

报错:Cannot find file: E:\实验室\20180409_Qt跑马灯\QtTest\QtTest.pro. 17:03:11: 进程"D:\Qt\Qt5.8.0\5.8\msvc2015\bin\qmake.exe"退出,退出代码 2 . Error while building/deploying project QtTest (kit: Desktop Qt 5.8.0 MSVC2015 32bit) The kit Desktop Qt 5.8.0 MSVC201

Download CMake 2.8.2 Download OpenCV 2.4.11 Download Qt 5.4 Highly improtant note: The installation directory should not contain any space or non-English character, otherwise weird error would happen when building.  Open CMake 2.8.2, set the source a

最近需要做一个项目 在arm 架构的linux下 没有桌面环境的情况下拉起 有界面的浏览器使用. 考虑用qt 的界面和 qtwebikt 的库去实现这一系列操作. 本文参考: Qt移植到ARM Linux教程:http://www.veryarm.com/930.html 成功移植qt软键盘和输入法到arm开发板的qt程序中:http://www.csdn1 2 3.com/html/mycsdn20140110/d1/d1ecf8c322c9447b049f2a71d12f5e87.html

Use Qt in Debian for OpenCASCADE eryar@163.com Recently several OpenCASCADE enthusiasts want to build my simple Qt demo about OpenCASCADE on ubuntu system, but could not compile it successfully. Because I only compiled the occQt in Windows system, do

Replace Default Qt version paths in: /usr/lib/x86_64-linux-gnu/qtchooser/default.confor in newer releases /usr/lib/x86_64-linux-gnu/qt-default/qtchooser/default.conf: /opt/Qt5/bin /opt/Qt5/lib Check: qtchooser -print-env   Reference: http://askubuntu

仅供参考. 体会:我个人此次编译不该使用Vs2013编译Qt. 使用以下程序: Qt : qt-opensource-windows-x86-msvc2012_64_opengl-5.2.1.exe Vs-Addin : qt-vs-addin-1.2.2-opensource.exe Vs2012 & Vs2013: 本机64位. 经历: 1,  编译Qt (最终可知是错误选择) 使用 Vs2013的编译工具[VS2013 x64 兼容工具命令提示]编译的Qt.编译配置: configure

收到板子后默认是Debian系统.gcc -v 后发现其编译链是:arm-linux-gnueabihf http://pan.baidu.com/s/1pJrAvsn 有相关工具下载,里面有这个 解压到/opt/arm-linux-gnueabihf,配置PATH路径: 在/etc/envirenment 的Path后加入:/opt/arm-linux-gnueabihf/bin 执行:source /etc/envirenment 下载QT4.8.6:http://download.qt.i

其实这只是给自己看的一个configure选项笔记,没有太多的东西. 首先: 下载qt5.6的源码: 地址: http://download.qt.io/archive/qt/5.6/ 下载完解压: tar  -xvf   qt-everywhere-opensource-src-5.6.0.tar.gz 解压完进入源代码 : 修改几个东西: 1. 进入qtbase/mkspecs 里面, 复制一份linux-arm-gnueabi-g++    ,名字为linux-arm 在进入 linux-

开发机环境搭建: 测试环境:CentOs7.1  Ubuntu 12.0.4 操作流程: 一.编译Qt4.7.0 1)CentOS上实践 1.tar xzvf qt-everywhere-opensource-src-4.7.0.tar.gz 2.cd 解压目录下 3.yum install libX11-devel libXext-devel libXtst-devel yum install libXrender*(我感觉可能上面库不够,出现报错) 4../configrue --prefi

目录 . Virtual Machine Introduce . Vmware Image File Format . VHD File Format . Convert VHD File Into VMDK . Run Virtual PC virtual machine in VMware Workstation . CoreOS Docker Configuration And Running && Vagrant + CoreOS + docker . Create A CoreO

Download FLTK 1.3.3 Download CMake 3.2.0 Start CMake 3.2.0, fill the source and destination: source: C:/FLTK/fltk-1.1.10 destination: C:/FLTK/build Click Configure and use MinGW Makefiles to complie. Change the following item: CMAKE_INSTALL_PREFIX [C

参考链接 Qt5.3 Tools and Versions MinGW ICU ActivePerl Qt 安装MinGW工具链环境 这里在Win32环境下要安装一个MinGW工具链,这里最好是先安装一个Qt环境,使用Qt自带的MinGW工具链,我这里是先安装一个Qt5.6的环境再用它来编译Qt5.3.2的静态库.下载并安装ActivePerl软件. 这里要用到MSYS环境,把编译ICU,openssl的gcc 都指向QT5.6.1自带的工具链GCC,这样才能保能Qt,ICU,openssl编译

一.下载Qt源码包到本机,然后解压缩#tar zxvf qt-x11-opensource-src-4.3.2.tar.gz -C /usr/local //将qt-x11-opensource-src-4.2.3.tar.gz源码包解压缩到/usr/local目录(推荐解压缩至 /usr/local目录) 二.进入用户家目录的.bash_profile文件设置Qt环境变量,在这里我们以root用户以例. #vi /root/.bash_profile //打开root用户.bash_profi

转载:http://blog.chinaunix.net/uid-23733724-id-290980.html     昨天开始在自己的fedora12下装qt~ 但是按照教程在/opt/EmbedSky/Qte目录下输入./x86-qtopia-2.2.0-konqueror_build 开始编译qt~ 可是,没多久就报错了:[root@localhost LG]# cd /opt/EmbedSky/[root@localhost EmbedSky]# ls4.3.3  crosstools